2012 BMW 7 Series engine fastener tightening specifications

expand_moreAir intake system

expand_moreIntake manifold

expand_more730 d xDrive with diesel straight-6 3.0 L 255 HP engine (2012.7–2015.12)

Figure 1. Air intake system, Intake manifold, 730 d xDrive with diesel straight-6 3.0 L 255 HP engine (2012.7–2015.12).


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 1.
Figure 2. Air intake system, Intake manifold, 730 d xDrive with diesel straight-6 3.0 L 255 HP engine (2012.7–2015.12).
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 2.

expand_more730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12)

Figure 3. Air intake system, Intake manifold, 730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12).


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 3.
Figure 4. Air intake system, Intake manifold, 730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12).
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 4.

expand_more730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12)

Figure 5. Air intake system, Intake manifold, 730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12).


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 5.
Figure 6. Air intake system, Intake manifold, 730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12).
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 6.


740 d with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the screws in steps.
740 d xDrive with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the screws in steps.
740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the screws evenly in several steps.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreM6


Upper section of intake manifold	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreM7


Lower section of intake manifold	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll other modifications


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley


BMW diesel straight-6 3.0 L N57 D30 B 302 HP	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
BMW gasoline straight-6 3.0 L N55 B30 A 315 HP	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
BMW gasoline straight-6 3.0 L N55 B30 A 349 HP	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreBMW gasoline V12 6.0 L N74 B60 A 536 HP


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAuxiliary drive belt tensioner


750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


M10	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreAuxiliary drive belt tensioner


M10	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreAir-conditioning compressor

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	180°180°180°


740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
ActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
ActiveHybrid with gasoline V8 4.4 L 443 HP engine (2010.10–2015.12)	13.28–17.7 lbf⋅ft13.28–17.7 lbf⋅ft18–24 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
All other modifications	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreAir-conditioning compressor bracket


740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAir-conditioning compressor pressure line

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M6	5.9–8.85 lbf⋅ft5.9–8.85 lbf⋅ft8–12 N⋅m

expand_moreAll other modifications


M8	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m

expand_moreAlternator

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreM8


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	190°190°190°


740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M8	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M8	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
All other modifications	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m


Servo pump pulley	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace screws.
Servo steering pump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Vacuum pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Vacuum pump sprocket wheel	48.68 lbf⋅ft48.68 lbf⋅ft66 N⋅m
Clean and lubricate the screws.

expand_moreCarburetion

expand_moreFuel-distributing pipe


740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M7	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M6	6.64–8.11 lbf⋅ft6.64–8.11 lbf⋅ft9–11 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M7	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m


760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m
All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreHigh-pressure line

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


On high-pressure pump	19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m
On rail	19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


On high-pressure pump	19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m
On rail	19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreM14


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreM14


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreM14


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)

expand_moreOn high-pressure pump (M14)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreOn injector (M12)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


On high-pressure pump	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
On rail	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreHigh-pressure pump

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


Manufacturer Bosch	8.11–9.59 lbf⋅ft8.11–9.59 lbf⋅ft11–13 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M6	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten the new screws evenly in several steps.


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten the new screws evenly in several steps.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M6	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten the new screws evenly in several steps.


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten the new screws evenly in several steps.

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


M6	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M6	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.

expand_moreActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


Manufacturer Bosch	8.11–9.59 lbf⋅ft8.11–9.59 lbf⋅ft11–13 N⋅m


All other modifications	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreHigh-pressure pump pulley

expand_moreBMW diesel straight-6 3.0 L N57 D30 B 302 HP


M12	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAll other modifications


Cap	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace the cover plate.
Central screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreInjection hoses

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


On injector	14.75–19.18 lbf⋅ft14.75–19.18 lbf⋅ft20–26 N⋅m
On rail	14.75–19.18 lbf⋅ft14.75–19.18 lbf⋅ft20–26 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreM12


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreM12


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreM12


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


On injector	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
On rail	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreInjection nozzle (injector)

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


Retaining clamp	8.85–10.33 lbf⋅ft8.85–10.33 lbf⋅ft12–14 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


Retaining clamp	8.85–10.33 lbf⋅ft8.85–10.33 lbf⋅ft12–14 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M7	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M7	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	8.11–11.06 lbf⋅ft8.11–11.06 lbf⋅ft11–15 N⋅m

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace copper sealing rings.
Second stage	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m

expand_moreInjection pump pulley


730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12)	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreCharging

expand_moreTurbo charger

expand_more740 d with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)


M10 × 25 screws	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8 × 20 screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


Clamps	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Use new parts.

expand_moreScrews (M8 × 20)


First stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreClamps


M8	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Use new parts.

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


Clamps	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Use new parts.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreClamps


M8	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Use new parts.

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreClamps


M8	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Use new parts.

expand_moreM8


Nuts	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Replace nuts.

expand_moreAll other modifications


Clamps	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreOn the engine block


Support	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreCooling system

expand_moreCoolant drain plug


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreCoolant pump

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°


750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.


750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.
750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.
All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace sealing rings.

expand_moreCoolant pump pulley


760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)


Inlet camshaft	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace aluminum screws.

expand_moreOutlet camshaft


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace aluminum screws.
Second stage	60°60°60°
Install bearing using special tool.

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	60°60°60°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


Inlet camshaft	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m

expand_moreOutlet camshaft

Figure 7. Cylinder head, Camshaft bearing, 740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12), Outlet camshaft.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Note correct order of tensioning. See figure 7.
Second stage	60°60°60°

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten crosswise from inside to outside.

expand_moreBearing casing

Figure 8. Cylinder head, Camshaft bearing, 750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12), Bearing casing.


Screws 1 – 20	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Note correct order of tensioning. See figure 8.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten the bearing cover of the camshafts in 1/2 turning steps from inside to outside.


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the bearing cover of the camshafts in 1/2 turning steps from inside to outside.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten the bearing cover of the camshafts in 1/2 turning steps from inside to outside.


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the bearing cover of the camshafts in 1/2 turning steps from inside to outside.

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll other modifications


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
helically from the inside out

expand_moreBearing casing


Screws 1 – 20	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
See figure 8.

expand_moreCylinder head screws

expand_more730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12)

expand_moreScrews 1 – 14 (M12 × 1,5 × 200)

Figure 9. Cylinder head, Cylinder head screws, 730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12), Screws 1 – 14 (M12 × 1,5 × 200).


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws. See figure 9.
Second stage	120°120°120°
Third stage	120°120°120°

expand_moreScrews 1 – 14 (M12 × 1,5 × 204,5)


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace screws. See figure 9.
Second stage	180° detach
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	120°120°120°
Fifth stage	120°120°120°

expand_moreScrew 15


Fourth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Sixth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_more730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12)

expand_moreScrews 1 – 14 (M12 × 1,5 × 200)


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws. See figure 9.
Second stage	120°120°120°
Third stage	120°120°120°

expand_moreScrews 1 – 14 (M12 × 1,5 × 204,5)


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace screws. See figure 9.
Second stage	180° detach
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	120°120°120°
Fifth stage	120°120°120°

expand_moreScrew 15


Fourth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Sixth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreMagnesium valve cover

expand_moreScrews 1 – 14

Figure 10. Cylinder head, Cylinder head screws, 730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12), Magnesium valve cover, Screws 1 – 14.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 10.
Second stage	90°90°90°
Fourth stage	45°45°45°

expand_moreScrews 1 – 10


Third stage	90°90°90°

expand_moreScrews 15 – 18


Fifth stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Sixth stage	90°90°90°

expand_morePlastic valve cover

expand_moreScrews 1 – 14


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 10.
Second stage	90°90°90°
Fourth stage	45°45°45°

expand_moreScrews 1 – 10


Third stage	90°90°90°

expand_moreScrews 15 – 18


Fifth stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.

expand_moreScrews 15 – 17


Sixth stage	90°90°90°

expand_moreScrew 18


Seventh stage	135°135°135°

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)

Figure 11. Cylinder head, Cylinder head screws, 740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12).


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
See figure 11.
Second stage	loosen by 180°
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	120°120°120°
Fifth stage	120°120°120°

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)

expand_moreM11


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 11.
Second stage	90°90°90°
Third stage	90°90°90°
Fourth stage	45°45°45°

expand_moreM9 × 125 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	45°45°45°


M9 × 30 screws	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
M9 × 70 screws	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreM9 × 95 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	45°45°45°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreScrews 1 – 10

Figure 12. Cylinder head, Cylinder head screws, 740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12), Screws 1 – 10.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 12.
Third stage	90°90°90°
Fifth stage	180°180°180°

expand_moreScrews 11 – 14


Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Fourth stage	90°90°90°
Sixth stage	180°180°180°

expand_moreScrews 15 – 18


Seventh stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)

expand_moreScrews 1 – 14

Figure 13. Cylinder head, Cylinder head screws, 750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12), Screws 1 – 14.


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws. See figure 13.
Second stage	180° detach
loosen in reverse order to the illustration
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	120°120°120°
Fifth stage	120°120°120°

expand_moreScrew 15


Sixth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreScrews 1 – 10

Figure 14. Cylinder head, Cylinder head screws, 750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12), Screws 1 – 10.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 14.	Part number: 11127582454
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 1 – 10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.	Part number: 11127607557
Second stage	90°90°90°
Third stage	140°140°140°

expand_moreScrews 11 – 12


Fourth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreScrews 1 – 10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screws. See figure 14.	Part number: 11127607557
Second stage	90°90°90°
Third stage	140°140°140°

expand_moreScrews 11 – 12


Fourth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreScrews 1 – 10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 14.	Part number: 11127582454
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 1 – 10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.	Part number: 11127607557
Second stage	90°90°90°
Third stage	140°140°140°

expand_moreScrews 11 – 12


Fourth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreScrews 1 – 14

Figure 15. Cylinder head, Cylinder head screws, 760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12), Screws 1 – 14.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screws. See figure 15.
Second stage	90°90°90°
Third stage	140°140°140°

expand_moreScrew 15


Fourth stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)

expand_moreScrews 1 – 10

Figure 16. Cylinder head, Cylinder head screws, ActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12), Screws 1 – 10.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 16.	Part number: 11127582454
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 12


Fourth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreScrews 1 – 14

Figure 17. Cylinder head, Cylinder head screws, ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12), Screws 1 – 14.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 17.
Second stage	90°90°90°
Third stage	180°180°180°

expand_moreScrews 15 – 18


Fourth stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll other modifications

expand_moreScrews 1 – 14 (M12 × 1,5 × 200)

Figure 18. Cylinder head, Cylinder head screws, All other modifications, Screws 1 – 14 (M12 × 1,5 × 200).


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws. See figure 18.
Second stage	120°120°120°
Third stage	120°120°120°

expand_moreScrew 15


Fourth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreValve cover

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreMagnesium valve cover


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Replace screws.
Second stage	90°90°90°


Plastic valve cover	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace sealing rings.

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m
Note correct order of tensioning. See figure 19.

740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m
Note correct order of tensioning. See figure 19.
Figure 20. Cylinder head, Valve cover.
750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings. See figure 20.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

Figure 21. Cylinder head, Valve cover, 750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12).


First cylinder row	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Note correct order of tensioning. See figure 21.
Figure 22. Cylinder head, Valve cover, 750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12).
Second cylinder row	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Note correct order of tensioning. See figure 22.

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

Figure 23. Cylinder head, Valve cover, 750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12).


First cylinder row	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten in several steps. See figure 23.
Figure 24. Cylinder head, Valve cover, 750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12).
Second cylinder row	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten in several steps. See figure 24.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

Figure 25. Cylinder head, Valve cover, 750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12).


First cylinder row	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Note correct order of tensioning. See figure 25.
Figure 26. Cylinder head, Valve cover, 750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12).
Second cylinder row	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Note correct order of tensioning. See figure 26.

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m
Note correct order of tensioning. See figure 27.

ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m
Note correct order of tensioning. See figure 27.
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreEngine block

expand_moreConnecting rod bearing

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screw, wash and slightly oil.
Second stage	120°120°120°

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	140°140°140°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	140°140°140°

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screw, wash and slightly oil.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	70°70°70°

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreNew connecting rod with new connecting rod screws


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Fourth stage	75°75°75°

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screw, wash and slightly oil.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	70°70°70°

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace, wash and lubricate the screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	70°70°70°

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screw, wash and slightly oil.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	70°70°70°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace and lightly oil the screw.
Second stage	70°70°70°

expand_moreCrankshaft central screws

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreM16


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Replace the screws and lubricate lightly
Second stage	360°360°360°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Replace and lightly oil the screw.
Second stage	270°270°270°

expand_moreAll other modifications

expand_moreM18 × 1,5 screws


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Replace screws. Oil bearing face.
Second stage	60°60°60°
Third stage	60°60°60°
Fourth stage	60°60°60°

expand_moreCrankshaft pulley


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreDrive plate

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	45°45°45°


750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace bolts.
750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace bolts.
750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace bolts.
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace screws.
ActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace screws.
ActiveHybrid with gasoline V8 4.4 L 443 HP engine (2010.10–2015.12)	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace screws.
All other modifications	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.

expand_moreEngine block closure screws

expand_moreBMW diesel straight-6 3.0 L N57 D30 A 241 HP


M30 × 1 screws	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
M40 × 1,5 screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreBMW diesel straight-6 3.0 L N57 D30 B 302 HP


M30	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
M40 × 1,5 screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreFlywheel

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreM12


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Second stage	45°45°45°


All other modifications	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.

expand_moreMain bearing

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreM10 × 100 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	70°70°70°

expand_moreM10 × 27 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace bolts.
Second stage	90°90°90°

expand_moreM10 × 41 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace bolts.
Second stage	90°90°90°

expand_moreM8 × 37 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts.
Second stage	90°90°90°

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	60°60°60°
Fourth stage	60°60°60°

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)

expand_moreM10 × 100 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	70°70°70°

expand_moreM10 × 27 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 41 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM8 × 37 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreScrews 1 – 14 (M10 × 100)

Figure 28. Engine block, Main bearing, 740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12), Screws 1 – 14 (M10 × 100).


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 28.
Second stage	70°70°70°

expand_moreM10 × 27 screw 15


Third stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Fourth stage	90°90°90°

expand_moreM10 × 41 screw 15


Third stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Fourth stage	90°90°90°

expand_moreScrew 15 (M8 × 37)


Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Fourth stage	90°90°90°

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	110°110°110°
Fourth stage	110°110°110°
Fifth stage	180° detach
Sixth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Seventh stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Eighth stage	110°110°110°
Ninth stage	110°110°110°

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreScrews 1 – 10

Figure 29. Engine block, Main bearing, 750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12), Screws 1 – 10.


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 29.
Second stage	100°100°100°

expand_moreScrews 11 – 20


Third stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Fourth stage	55°55°55°

expand_moreScrews 21 – 30

expand_moreSixth stage

expand_moreScrews 1 – 10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
	Part number: 11127607557
Second stage	90°90°90°
Third stage	140°140°140°

expand_moreThreaded sleeve


Fifth stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreScrews 1 – 10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 29.
Second stage	115°115°115°

expand_moreScrews 11 – 20


Third stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Fourth stage	55°55°55°

expand_moreScrews 21 – 30


Sixth stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Seventh stage	45°45°45°

expand_moreThreaded sleeve


Fifth stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreScrews 1 – 10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 29.
Second stage	100°100°100°

expand_moreScrews 11 – 20


Third stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Fourth stage	55°55°55°

expand_moreScrews 21 – 30


Sixth stage	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m

expand_moreThreaded sleeve


Fifth stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreScrews 1 – 14

Figure 30. Engine block, Main bearing, 760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12), Screws 1 – 14.


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 30.
Second stage	100°100°100°

expand_moreScrews 15 – 28


Third stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Fourth stage	55°55°55°

expand_moreThreaded sleeve


Fifth stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_moreScrews 29 – 39


Sixth stage	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m

expand_moreScrew 40


Seventh stage	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)

expand_moreM11 × 102 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	100°100°100°

expand_moreM8 × 70 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace bolts.
Second stage	55°55°55°

expand_moreAll other modifications


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	60°60°60°
Fourth stage	60°60°60°

expand_moreVibration damper

expand_moreBMW gasoline straight-6 3.0 L N52 B30 A 255 HP


M8	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreBMW gasoline straight-6 3.0 L N55 B30 A 315 HP


M8	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreBMW gasoline straight-6 3.0 L N54 B30 A 322 HP


M8 × 16 screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreAll other modifications


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	120°120°120°

expand_moreEngine control

expand_moreBottom part of the control unit housing

expand_moreBMW gasoline V8 4.4 L N63 B44 B 443 HP


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreM8


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreBMW gasoline V12 6.0 L N74 B60 A 536 HP

Figure 31. Engine control, Bottom part of the control unit housing, BMW gasoline V12 6.0 L N74 B60 A 536 HP.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Note correct order of tensioning. See figure 31.

expand_moreM10


Second stage	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreM8


Second stage	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreAll other modifications


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreM8


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreCamshaft timing chain guide rail

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreBearing screws


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreM18


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreBearing screws


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreM18


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreAt the cylinder head


M6 × 35 screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


At the cylinder head	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll other modifications


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreCamshaft timing chain tensioner

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreN52 engine


Magnesium valve cover	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace sealing rings.
Plastic valve cover	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.


740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m


ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.
ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.
All other modifications	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace sealing rings.

expand_moreCamshaft timing chain tensioning rail


730 d xDrive with diesel straight-6 3.0 L 255 HP engine (2012.7–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
730 d with diesel straight-6 3.0 L 255 HP engine (2012.7–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreBearing screws


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreM22


Cap	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m


740 d with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
740 d xDrive with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreBearing screws


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreM22


Cap	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace the cover plate.


750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications


M10	33.93 lbf⋅ft33.93 lbf⋅ft46 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


Camshaft timing gear	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreChain tensioner

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


M22	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace screws.
M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


M22 × 1,5 screws	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


M22	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace screws.

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll other modifications


M22 × 1,5 screws	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.


Control drive chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreControl drive chain tensioner


BMW diesel straight-6 3.0 L N57 D30 B 302 HP	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Control drive chain tensioning rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreEccentric shaft for intake valve timing


M6	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m

expand_moreInlet camshaft wheel

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	90°90°90°

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Third stage	90°90°90°

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	90°90°90°

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	180°180°180°

expand_moreOil pump camshaft timing chain guide rail

expand_moreM16 × 1,5 screws


Cap	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace the cover plate.

expand_moreM6 × 16 screws


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°


Oil pump drive chain tensioner	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreOutlet camshaft wheel

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	90°90°90°

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Third stage	90°90°90°

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	90°90°90°

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Apply copper paste onto bearing face.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	180°180°180°

expand_moreTiming case cover

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


M10	34.67 lbf⋅ft34.67 lbf⋅ft47 N⋅m
M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


On high-pressure pump	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreOn the engine block


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°

expand_moreOn timing case cover


Cap	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace the cover plate.

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications

expand_moreOn the engine block


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°

expand_moreOn timing case cover


Cap	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace the cover plate.

expand_moreTiming case cover first cylinder row


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreTiming case cover second cylinder row


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine lubrication

expand_moreOil cooler


740 d with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
740 d xDrive with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreOil drain plug

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M18	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace sealing rings.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M18	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace sealing rings.

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M18	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace sealing rings.


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreOil filter housing

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)


At the cylinder head	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more740 d with diesel straight-6 3.0 L 308 HP engine (2012.7–2015.12)


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.
On the engine block	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


At the cylinder head	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreOil filter cover


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Lubricate the sealing rings.
Second stage	180° detach
Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreOil filter cover


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Lubricate the sealing rings.
Second stage	180° detach
Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreOil filter cover


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Lubricate the sealing rings.
Second stage	180° detach
Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreOil filter cover


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Second stage	180° detach
Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


Oil filter drain plug	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.

expand_moreAll other modifications


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOil lines

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


M6	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll other modifications


M10	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Replace sealing rings.
M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace sealing rings.

expand_moreOil pump

expand_more730 d xDrive with diesel straight-6 3.0 L 255 HP engine (2012.7–2015.12)


On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace screws.

expand_more730 d with diesel straight-6 3.0 L 208 HP engine (2009.7–2015.12)


On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace screws.

expand_more730 d with diesel straight-6 3.0 L 241 HP engine (2008.10–2015.12)


On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace screws.

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreM8 × 123 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM8 × 31 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°


740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
740 d xDrive with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)

expand_moreM8 × 123 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	180°180°180°

expand_moreM8 × 31 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	90°90°90°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreScrews (M8 × 123)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreScrews (M8 × 31)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreScrews (M8 × 37)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)


M8 × 30 screws	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Use new screws

expand_moreM8 × 45 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M8	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreAll other modifications


M8	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreOil pump chain wheel

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	45°45°45°

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	90°90°90°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	45°45°45°

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)

expand_moreM8


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	90°90°90°

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)

expand_moreM10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Left-hand thread
Second stage	40°40°40°


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreM10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Left-hand thread
Second stage	40°40°40°


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)

expand_moreM10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Left-hand thread
Second stage	40°40°40°


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreM10, central nuts


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Left-hand thread
Second stage	40°40°40°

expand_moreM6


Wheel	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	40°40°40°

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Left-hand thread
Second stage	50°50°50°

expand_moreOil sump

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreAluminium oil sump (M8 × 112)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAluminium oil sump (M8 × 92)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreSheet-steel sump M8 × 24 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM8 × 26 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	60°60°60°


740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.
740 d xDrive with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_more740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)

expand_moreM8 × 112 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts.
Second stage	180°180°180°

expand_moreM8 × 26 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts.
Second stage	60°60°60°

expand_moreM8 × 36 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts.
Second stage	90°90°90°

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreM8 × 36 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


M8 × 50 screws	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace screws.

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)

expand_moreAt the gearbox


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreBearing pedestal on the engine sump


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreOn axle (M12)


Torx screws	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m

expand_moreOn the engine block


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace sealing rings.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


Oil sump lower part	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace screws.
Oil sump top part	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)

expand_moreM8


Oil sump lower part	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace screws.
Oil sump top part	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace screws.

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


Oil sump lower part	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace screws.
Oil sump top part	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)

expand_moreM8


Oil sump lower part	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Oil sump top part	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


Oil sump lower part	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Oil sump top part	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreEngine management

expand_moreCamshaft sensor


740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
ActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
ActiveHybrid with gasoline V8 4.4 L 443 HP engine (2010.10–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
All other modifications	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m

expand_moreCrankshaft sensor

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
ActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
ActiveHybrid with gasoline V8 4.4 L 443 HP engine (2010.10–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m


Exhaust gas temperature sensor	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreGlow plugs


BMW diesel straight-6 3.0 L N57 D30 B 302 HP	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m
All other modifications	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreKnock sensor


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m


Lambda sensor	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


M12	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreOn the engine block


M12 screws (class 8.8)	48.68 lbf⋅ft48.68 lbf⋅ft66 N⋅m

expand_moreAll other modifications

expand_moreOn the engine block


M10 screws (class 8.8)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreEngine mounting

expand_moreAt the subframe


M8 screws (class 8.8)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreOn engine bracket


M12 screws (class 10.9)	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreSubframe

expand_moreOn chassis


M12	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M8	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreAll other modifications

expand_moreClamps


M8	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Use new parts.

expand_moreDiesel particulate filter

expand_moreBMW diesel straight-6 3.0 L N57 D30 A 241 HP

expand_moreM8


At the bracket	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreBMW diesel straight-6 3.0 L N57 D30 B 302 HP

expand_moreM8


At the bracket	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreBMW diesel straight-6 3.0 L N57 D30 C 375 HP, 740 N⋅m at 2000 RPM

expand_moreAt the turbocharger


Clamps	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new parts.

expand_moreExhaust manifold

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)


M7	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more740 d with diesel straight-6 3.0 L 302 HP engine (2009.9–2015.12)


Heat shields	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Otherwise	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Replace nuts.


740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)

expand_moreAt the cylinder head

Figure 32. Exhaust system, Exhaust manifold, 740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12), At the cylinder head.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace nuts. See figure 32.
Second stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreOn exhaust manifold


Support	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOn the engine block


Support	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_more750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12)

expand_moreM8


Stud screws	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace the stud bolt.

expand_moreNuts (M8)

Figure 33. Exhaust system, Exhaust manifold, 750 d xDrive with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2012.7–2015.12), Nuts (M8).


First stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Replace nuts. See figure 33.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M8	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_more750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten from inside to outside.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M8	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_more760 i with gasoline V12 6.0 L 536 HP engine (2009.9–2015.12)


M8	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreActiveHybrid with gasoline V8 4.4 L 400 HP engine (2010.10–2015.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Tighten in steps from inside to outside.

expand_moreExhaust pipe


M8	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreExhaust pipe bracket


At the gearbox	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreFuel supply

expand_moreFuel filter bracket


M6	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreIgnition system

expand_moreSpark plugs


M12 × 1,25 screws	14.75–19.18 lbf⋅ft14.75–19.18 lbf⋅ft20–26 N⋅m
M14 × 1,25 screws	19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m

expand_moreStart system

expand_moreStarter

expand_more730 i, Li with gasoline straight-6 3.0 L 255 HP engine (2008.6–2015.12)

expand_moreM10 × 30 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 85 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°


740 i with gasoline straight-6 3.0 L 322 HP engine (2008.10–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
740 i, Li with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Replace screws.
740 i, Li xDrive with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Replace screws.

expand_more750 i with gasoline V8 4.4 L 402 HP engine (2008.10–2015.12)


M10	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m


750 i with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_more750 i xDrive with gasoline V8 4.4 L 402 HP engine (2009.9–2015.12)


M10	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m


750 i xDrive with gasoline V8 4.4 L 443 HP engine (2012.10–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
ActiveHybrid with gasoline straight-6 3.0 L 315 HP engine (2012.7–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Replace screws.
ActiveHybrid with gasoline straight-6 3.0 L 349 HP engine (2012.7–2015.12)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Replace screws.
All other modifications	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

2012 BMW 7 Series Fifth generation LCI Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2012 BMW 7 Series generations

Fifth generation

BMW 7 Series Fifth generation LCI model years

Suggest edit