2016 BMW 2 Series Active Tourer First generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 7.38 lbf⋅ft |
| Brake hose | 17.7 lbf⋅ft |
| Brake line | 12.54 lbf⋅ft |
| Front axle brake caliper | 25.81 lbf⋅ft |
| Replace screws. | |
| Front axle brake caliper mounting support | 81.13 lbf⋅ft |
| Replace screws. | |
| Front axle brake disc | 11.8 lbf⋅ft |
| Replace screws. | |
| Wheel speed sensor | 5.9 lbf⋅ft |
| Lower steering column joint | 20.65 lbf⋅ft |
| Clean thread and use new screws. | |
| M8 | 15.49 lbf⋅ft |
| All other modifications | 15.49 lbf⋅ft |
| First stage | 73.76 lbf⋅ft |
| Second stage | 45° |
| Steering gear heat protection plate | 5.9 lbf⋅ft |
| Steering wheel | 45.73 lbf⋅ft |
| Replace screws. | |
| M14 | 129.07 lbf⋅ft |
| Replace nuts. | |
| Track rod end on track rod | 23.6 lbf⋅ft |
| Track rod on steering gear | 52.37 lbf⋅ft |
| First stage | 22.13 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| M12 | 41.3 lbf⋅ft |
| Replace nuts. | |
| M14 | 33.19 lbf⋅ft |
| Replace nuts. | |
| First stage | 32.45 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| First stage | 154.89 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Stabiliser mounting at the stabiliser | 41.3 lbf⋅ft |
| Replace nuts. | |
| Stabiliser mounting at suspension strut | 41.3 lbf⋅ft |
| Replace nuts. | |
| Stabilizer mounting at the subframe | 20.65 lbf⋅ft |
| Replace screws. | |
| Supporting joint on the suspension strut mounting | 44.25 lbf⋅ft |
| Replace screws and nuts. | |
| First stage | 73.76 lbf⋅ft |
| Second stage | 90° |
| M12 | 73.76 lbf⋅ft |
| Replace screws and nuts. | |
| First stage | 59 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Union nuts | 5.9 lbf⋅ft |
| Wheel attachment | 103.26 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 BMW 2 Series Active Tourer user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 2 Series Active Tourer service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 BMW 2 Series Active Tourer you're not only saving money, but also also improving your technical skills and learning something new.