2013 Audi Q7 First generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Audi diesel V12 5.9 L CCGA engines | 6.64 lbf⋅ft |
All other modifications | 1.84 lbf⋅ft |
First stage | Tighten by hand |
Tighten the screws cross-wise from inside to outside. | |
Second stage | 7.38 lbf⋅ft |
Tighten the screws in steps. |
All other modifications | 6.64 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. |
All Audi diesel V8 4.1 L CCFA engines | 18.44 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 18.44 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 16.23 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTB engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTC engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWB engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWC engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWE engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CNAA engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWA engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWB engines | 29.5 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Tensioning lever | 29.5 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Audi diesel V8 4.1 L CCFA 335 HP at 4000 RPM, 760 N⋅m at 1750 RPM | 36.88 lbf⋅ft |
Audi diesel V8 4.1 L CCFC 335 HP at 4000 RPM, 760 N⋅m at 1750 RPM | 36.88 lbf⋅ft |
M10 | 40.57 lbf⋅ft |
M8 | 22.13 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 16.23 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTB engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTC engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWB engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWC engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWE engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CNAA engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWA engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWB engines | 14.75 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Air-conditioning compressor pressure line | 14.75–18.44 lbf⋅ft |
Alternator | 16.96 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTB engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTC engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWB engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWC engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWE engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CNAA engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWA engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWB engines | 14.75 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
High-pressure side | 25.81 lbf⋅ft |
Replace sealing rings | |
Low-pressure side | 6.64 lbf⋅ft |
All other modifications | 25.81 lbf⋅ft |
All Audi diesel V6 3.0 L CASA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Audi diesel V6 3.0 L CASA engines | 16.23 lbf⋅ft |
M10 | 62.69 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Vacuum pump | 6.64 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 16.23 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 16.23 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 3.69 lbf⋅ft |
Third stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Exhaust gas return valve | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CASA engines | 16.96 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 16.23 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 16.23 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 16.96 lbf⋅ft |
All other modifications | 1.84 lbf⋅ft |
Replace screws. |
All Audi gasoline V6 3.0 L CJTB engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CJTC engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CJWB engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CJWC engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CJWE engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CNAA engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CTWA engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi gasoline V6 3.0 L CTWB engines | 19.91 lbf⋅ft |
Oil thread. | |
All other modifications | 18.44 lbf⋅ft |
Oil thread. |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | Screw in manually up to stop. |
Use new screws and snug them down crosswise. | |
Second stage | 14.75 lbf⋅ft |
First stage | Screw in manually up to stop. |
Use new screws and snug them down crosswise. | |
Second stage | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 51.63 lbf⋅ft |
Replace nuts. | |
All Audi diesel V8 4.1 L CCFC engines | 51.63 lbf⋅ft |
Replace nuts. |
CCMA engine | 55.32 lbf⋅ft |
Centering screws | 17.7 lbf⋅ft |
Central nuts | 44.25 lbf⋅ft |
Replace nuts. |
All other modifications | 51.63 lbf⋅ft |
Injection hoses | 18.44 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 6.64 lbf⋅ft |
Replace nuts. | |
All Audi diesel V6 3.0 L CJGC engines | 10.33 lbf⋅ft |
All Audi diesel V6 3.0 L CJGD engines | 10.33 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 10.33 lbf⋅ft |
All Audi diesel V6 3.0 L CLZB engines | 10.33 lbf⋅ft |
All Audi diesel V6 3.0 L CRCA engines | 10.33 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Audi diesel V6 3.0 L CASA engines | 4.06 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 4.06 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 4.06 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 4.06 lbf⋅ft |
First stage | Screw in manually up to stop. |
Second stage | 7.38 lbf⋅ft |
Charge air compressor | 14.75 lbf⋅ft |
Replace nuts. | |
Pulley for charge-air compressor | 19.91 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 90° |
First stage | Screw in manually up to stop. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. Use hot screw paste. | |
Second stage | 90° |
First stage | Screw in new screw(s) manually as far as it goes. |
Replace screws. | |
Second stage | 7.38 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 22.13 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel V8 4.1 L CCFC engines | 22.13 lbf⋅ft |
Replace sealing rings. |
Union nuts | 22.13 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 18.44 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 18.44 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 11.06 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel V8 4.1 L CCFC engines | 11.06 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 11.06 lbf⋅ft |
Otherwise | 6.64 lbf⋅ft |
At the turbocharger | 6.64 lbf⋅ft |
Use hot screw paste |
All Audi diesel V12 5.9 L CCGA engines | 16.23 lbf⋅ft |
Gradually tighten screws crosswise. | |
All other modifications | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. |
All Audi diesel V6 3.0 L CASA engines | 16.23 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CJGC engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJGD engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CLZB engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CRCA engines | 16.96 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Replace sealing rings. |
All Audi diesel V8 4.1 L CCFA engines | 7.38 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 7.38 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 7.38 lbf⋅ft |
All other modifications | 2.95 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 4.43 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Audi diesel V6 3.0 L CASA engines | 6.64 lbf⋅ft |
Tighten the screws evenly from inside to outside in several steps. |
First stage | Screw in screw manually up to stop. |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Use new screws. See figure 2. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Fourth stage | 7.38 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 6.64 lbf⋅ft |
Tighten the screws evenly from inside to outside in several steps. | |
All Audi diesel V6 3.0 L CJGA engines | 6.64 lbf⋅ft |
Tighten the screws evenly from inside to outside in several steps. |
First stage | Tighten by hand |
Tighten in steps from inside to outside. | |
Second stage | 6.64 lbf⋅ft |
First stage | Tighten by hand |
Tighten in steps from inside to outside. | |
Second stage | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 6.64 lbf⋅ft |
Tighten the screws evenly from inside to outside in several steps. |
First stage | Screw in screw manually up to stop. |
See figure 3. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Tighten by hand |
Replace screws. See figure 4. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 44.25 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First stage | Tighten by hand |
Replace screws. See figure 4. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 44.25 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 5. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 5. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 5. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 44.25 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
Sixth stage | 16.23 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Replace screws. See figure 6. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten screws crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
All Audi diesel V6 3.0 L CASA engines | 16.96 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 44.25 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 16.96 lbf⋅ft |
Central screws | 44.25 lbf⋅ft |
Wheel | 16.96 lbf⋅ft |
Central screws | 44.25 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Shaft must be replaced when the screw connection has been loosened. | |
Second stage | 90° |
Wheel | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 16.96 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central screws | 44.25 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Replace and lightly oil the screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace and lightly oil the screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V8 4.1 L CCFA engines | 4.43 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 4.43 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 199.14 lbf⋅ft |
Use screw-locking compound. |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V8 4.1 L CCFA engines | 25.81 lbf⋅ft |
TDC marking. | |
All Audi diesel V8 4.1 L CCFC engines | 25.81 lbf⋅ft |
TDC marking. | |
All Audi diesel V12 5.9 L CCGA engines | 25.81 lbf⋅ft |
All other modifications | 10.33 lbf⋅ft |
Replace sealing rings. |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
first tighten crosswise inside, then outside See figure 7. | |
Second stage | 36.88 lbf⋅ft |
Replace screws. | |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
See figure 8. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 9. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 9. |
First step | 36.88 lbf⋅ft |
first tighten crosswise inside, then outside | |
Second step | 180° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 9. |
First step | 36.88 lbf⋅ft |
first tighten crosswise inside, then outside | |
Second step | 180° |
First stage | 22.13 lbf⋅ft |
Tighten the screws crosswise. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 | 6.64 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
See figure 11. | |
Fourth stage | 6.64 lbf⋅ft |
Second stage | 2.21 lbf⋅ft |
Third stage | 90° |
Fifth stage | 90° |
Sixth stage | 11.8 lbf⋅ft |
Seventh stage | 14.75 lbf⋅ft |
Eighth stage | 180° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
High pressure pump belt | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Bearing bush | 18.44 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CJGC engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJGD engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CLZB engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CRCA engines | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Audi diesel V8 4.1 L CCFC 335 HP at 4000 RPM, 760 N⋅m at 1750 RPM | 17.7 lbf⋅ft |
Audi diesel V8 4.1 L CCFA 335 HP at 4000 RPM, 760 N⋅m at 1750 RPM | 17.7 lbf⋅ft |
Audi diesel V12 5.9 L CCGA 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM | 17.7 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Left | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Bottom | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Inlet camshaft wheel | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 59 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CJGC engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 16.96 lbf⋅ft |
All other modifications | 8.85 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
Cap | 6.64 lbf⋅ft |
Otherwise | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten the new screws evenly in several steps. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten the new screws evenly in several steps. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace bolts and tighten crosswise. | |
Second stage | 90° |
Cap | 6.64 lbf⋅ft |
Otherwise | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten the new screws evenly in several steps. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten the new screws evenly in several steps. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace bolts and tighten crosswise. | |
Second stage | 90° |
Toothed belt guard | 6.64 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 11.06 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
High-pressure pump | 16.96 lbf⋅ft |
Use new parts. |
Toothed belt tightener | 16.96 lbf⋅ft |
Heat-exchanger on oil filter housing | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
Nuts | 4.43 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CJGC engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CJGD engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CLZB engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CRCA engines | 6.64 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Second stage | 90° |
6.0 TDI with diesel V12 5.9 L 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM engine (2008.9–2014.5) | 5.9 lbf⋅ft |
M14 | 22.13 lbf⋅ft |
M24 | 36.88 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Replace sealing rings. |
Oil filter cover | 25.81 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 25.81 lbf⋅ft |
Replace the O ring. |
Oil filter cover | 25.81 lbf⋅ft |
Replace the O ring. |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 25.81 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
Oil filter cover | 25.81 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
Audi diesel V8 4.1 L CCFA 335 HP at 4000 RPM, 760 N⋅m at 1750 RPM | 6.64 lbf⋅ft |
Replace sealing rings. | |
Audi diesel V8 4.1 L CCFC 335 HP at 4000 RPM, 760 N⋅m at 1750 RPM | 6.64 lbf⋅ft |
Replace sealing rings. |
On the engine block | 6.64 lbf⋅ft |
All other modifications | 9.59 lbf⋅ft |
Oil pressure sensor | 14.75 lbf⋅ft |
Replace sealing rings. |
All Audi diesel V6 3.0 L CASA engines | 17.7 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 6.64 lbf⋅ft |
Replace screws. | |
All Audi diesel V8 4.1 L CCFC engines | 6.64 lbf⋅ft |
Replace screws. | |
All Audi diesel V12 5.9 L CCGA engines | 6.64 lbf⋅ft |
Replace screws. | |
All Audi diesel V6 3.0 L CCMA engines | 17.7 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 17.7 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CNRB engines | 17.7 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Replace screws. |
All Audi diesel V6 3.0 L CASA engines | 47.2 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 44.25 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 47.2 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 47.2 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
All Audi diesel V6 3.0 L CNRB engines | 47.2 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 2.21 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Tighten new screws crosswise in outside-to-inside order. | |
Second stage | 90° |
Oil sump top part | 33.19 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Cap | 25.81 lbf⋅ft |
Oil sump top part | 10.33 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 2.21 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Tighten new screws crosswise in outside-to-inside order. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 3.69 lbf⋅ft |
See figure 12. | |
Second stage | 11.06 lbf⋅ft |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 6.64 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
All Audi diesel V6 3.0 L CJGC engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CJGD engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CLZB engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CRCA engines | 8.85 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CASA engines | 3.69 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 6.64 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 6.64 lbf⋅ft |
All Audi diesel V12 5.9 L CCGA engines | 2.95 lbf⋅ft |
All Audi diesel V6 3.0 L CCMA engines | 3.69 lbf⋅ft |
All Audi diesel V6 3.0 L CJGA engines | 3.69 lbf⋅ft |
All Audi diesel V6 3.0 L CNRB engines | 3.69 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Crankshaft sensor | 6.64 lbf⋅ft |
Replace screws. | |
Exhaust gas temperature sensor | 33.19 lbf⋅ft |
Use hot screw paste |
All Audi diesel V12 5.9 L CCGA engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CJGC engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CJGD engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CJMA engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CLZB engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CRCA engines | 8.85 lbf⋅ft |
All other modifications | 12.54 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Audi diesel V6 3.0 L CJGA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM | 36.88 lbf⋅ft |
Audi diesel V6 3.0 L CNRB 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM | 36.88 lbf⋅ft |
Audi diesel V6 3.0 L CCMA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM | 36.88 lbf⋅ft |
Audi diesel V6 3.0 L CASA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM | 36.88 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
Use hot screw paste |
On engine mounting | 55.32 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Second stage | 90° |
On engine mounting | 55.32 lbf⋅ft |
Replace nuts. |
First stage | 36.88 lbf⋅ft |
Second stage | 90° |
At the subframe | 44.25 lbf⋅ft |
At the subframe | 44.25 lbf⋅ft |
At the subframe | 44.25 lbf⋅ft |
At the subframe | 44.25 lbf⋅ft |
On engine bracket | 55.32 lbf⋅ft |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Second stage | 180° |
At the turbocharger | 16.96 lbf⋅ft |
Use hot screw paste |
All other modifications | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste |
Catalytic converter bracket | 16.96 lbf⋅ft |
Replace nuts. |
All other modifications | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | Screw in manually up to stop. |
Replace nuts. Use hot screw paste. | |
Second stage | 11.06 lbf⋅ft |
Tighten crosswise from inside to outside. | |
Third stage | 18.44 lbf⋅ft |
First stage | Screw in manually up to stop. |
Replace nuts. Use hot screw paste. | |
Second stage | 11.06 lbf⋅ft |
Tighten crosswise from inside to outside. | |
Third stage | 18.44 lbf⋅ft |
First stage | Tighten by hand |
Tighten from inside to outside. | |
Second stage | 18.44 lbf⋅ft |
Replace nuts. | |
Third stage | 18.44 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
Fifth stage | 90° |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All Audi diesel V8 4.1 L CCFA engines | 7.38 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 7.38 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace nuts. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 90° |
Clamps | 16.96 lbf⋅ft |
Clamps | 16.96 lbf⋅ft |
Clamps | 22.13 lbf⋅ft |
Clamps | 16.96 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Clamps | 16.96 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 16.96 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 16.96 lbf⋅ft |
With tail pipe | 44.25 lbf⋅ft |
Otherwise | 16.96 lbf⋅ft |
Clamps | 22.13 lbf⋅ft |
Particle filter bracket | 16.96 lbf⋅ft |
Replace screws. |
All other modifications | 16.96 lbf⋅ft |
Replace nuts. |
Fuel filter bracket | 5.9 lbf⋅ft |
Cap | 5.9 lbf⋅ft |
Fuel filter cover | 5.9 lbf⋅ft |
Replace sealing rings. |
Preliminary feed pump | 81.13 lbf⋅ft |
Preliminary feed pump | 81.13 lbf⋅ft |
Replace sealing rings. |
Spark plugs | 22.13 lbf⋅ft |
All Audi diesel V8 4.1 L CCFA engines | 33.19 lbf⋅ft |
All Audi diesel V8 4.1 L CCFC engines | 33.19 lbf⋅ft |
Bottom | 47.94 lbf⋅ft |
Screws | 47.94 lbf⋅ft |
Bottom | 47.94 lbf⋅ft |
Screws | 47.94 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTB engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJTC engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWB engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWC engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CJWE engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CNAA engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWA engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L CTWB engines | 29.5 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi Q7 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q7 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Audi Q7 you're not only saving money, but also also improving your technical skills and learning something new.