in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
Drive shaft heat protection plate 16.96 lbf⋅ft
expand_moreFront axle drive shaft
At the gearbox 51.63 lbf⋅ft
Replace screws.
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
expand_morePropeller shaft
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreRear axle drive shaft
expand_moreAt the differential
M10 51.63 lbf⋅ft
Replace screws.
expand_moreAt the differential (M8)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreClutch
expand_moreClutch module
First stage Fingertight fastening of first
screw required.
Second stage Turn clutch module by 120°.
Third stage Fingertight fastening of second
screw required.
Fourth stage Turn clutch module by 120°.
Fifth stage 44.25 lbf⋅ft
Tighten screws one after the other using prescribed torque.
expand_moreClutch pressure plate
First stage 16.23 lbf⋅ft
Replace screws.
Second stage 90°
Clutch slave cylinder 14.75 lbf⋅ft
Clutch slave cylinder bleeder valve 4.06 lbf⋅ft
expand_moreGear shifting
Gear rod 16.96 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
expand_moreAll Audi diesel straight-4 2.0 L CJCD engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreM10 × 75 screws
First stage 11.06 lbf⋅ft
Reuse screws only 2 times.
Second stage 90°
expand_moreM12
First stage 22.13 lbf⋅ft
Reuse screws only 2 times.
Second stage 90°
expand_moreAll other modifications
M10 × 50 screws 47.94 lbf⋅ft
expand_moreM10 × 75 screws
First stage 11.06 lbf⋅ft
Reuse screws only 2 times.
Second stage 90°
expand_moreM12 × 100 screws
First stage 22.13 lbf⋅ft
Reuse screws only 2 times.
Second stage 90°
expand_moreM12 × 120 screws
First stage 22.13 lbf⋅ft
Reuse screws only 2 times.
Second stage 90°
expand_moreM12 × 75 screws
First stage 22.13 lbf⋅ft
Reuse screws only 2 times.
Second stage 90°
expand_moreGearbox lubrication
expand_moreGearbox oil drain plug
0B1 gearbox 33.19 lbf⋅ft
expand_moreGearbox oil filler plug
0B1 gearbox 33.19 lbf⋅ft
expand_moreOil control plug
expand_moreWith automatic gearbox
0BK gearbox 22.13 lbf⋅ft
Use new seal and screws.
expand_moreGearbox mounting
expand_moreGearbox mounting
expand_moreAll Audi diesel straight-4 2.0 L CJCD engines
Nuts 14.75 lbf⋅ft
expand_moreScrews
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
At the subframe 14.75 lbf⋅ft
expand_moreGearbox support
At the gearbox 29.5 lbf⋅ft
On chassis 51.63 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2017 Audi Q5 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q5 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2017 Audi Q5 you're not only saving money, but also also improving your technical skills and learning something new.

Audi Q5 First generation facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat