2012 Audi Q5 First generation facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Drive shaft heat protection plate | 16.96 lbf⋅ft |
At the gearbox | 51.63 lbf⋅ft |
Replace screws. |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 51.63 lbf⋅ft |
Replace screws. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | Fingertight fastening of first screw required. |
Second stage | Turn clutch module by 120°. |
Third stage | Fingertight fastening of second screw required. |
Fourth stage | Turn clutch module by 120°. |
Fifth stage | 44.25 lbf⋅ft |
Tighten screws one after the other using prescribed torque. |
First stage | 16.23 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Clutch slave cylinder | 14.75 lbf⋅ft |
Clutch slave cylinder bleeder valve | 4.06 lbf⋅ft |
Gear rod | 16.96 lbf⋅ft |
M10 × 50 screws | 47.94 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Reuse screws only 2 times. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Reuse screws only 2 times. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Reuse screws only 2 times. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Reuse screws only 2 times. | |
Second stage | 90° |
0B1 gearbox | 33.19 lbf⋅ft |
0B1 gearbox | 33.19 lbf⋅ft |
0BK gearbox | 22.13 lbf⋅ft |
Use new seal and screws. |
At the subframe | 14.75 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On chassis | 51.63 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 Audi Q5 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q5 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2012 Audi Q5 you're not only saving money, but also also improving your technical skills and learning something new.
2012 Audi Q5 generations
In 2012 Audi offered 2 generations of the Q5. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.