2014 Audi A7 S7 Sportback transmission fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAxle drive

expand_moreAWD clutch oil control screws


0BF axle drive	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAWD clutch oil drain plug


0BF axle drive	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreDrive shaft heat protection plate


On rear axle differential	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFront axle drive shaft

expand_moreAt the gearbox


M10	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Use new screws.

expand_moreCentral screws


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Use new screw.
Second stage	180°180°180°


Propeller shaft intermediate bearing	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morePropeller shaft


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreRear axle drive flange


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreRear axle drive shaft

expand_moreAt the gearbox


M10	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Use new screws.

expand_moreCentral screws


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Use new screw.
Second stage	180°180°180°

expand_moreGearbox

expand_moreGearbox flange connection at engine


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM10 × 60 and M10 × 95 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Second stage	90°90°90°

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreTorque converter


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M12	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreGearbox mounting

expand_moreGearbox cross support


M10 × 40 screws	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
M10 × 55 screws	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreGearbox mounting


At the crossmember	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreGearbox support


At the gearbox	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Audi A7 S7 Sportback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A7 S7 Sportback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2014 Audi A7 S7 Sportback you're not only saving money, but also also improving your technical skills and learning something new.

2014 Audi A7 S7 Sportback generations

In 2014 Audi offered 2 generations of the A7 S7 Sportback. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

C7

Type 4GA, Type 4GF

2014 Audi A7 S7 Sportback C7 facelift Transmission Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2014 Audi A7 S7 Sportback generations

C7

Audi A7 S7 Sportback C7 facelift model years

Suggest edit