in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
PR code 1ZK 9.59 lbf⋅ft
PR code FM0 9.59 lbf⋅ft
PR code 1LA 9.59 lbf⋅ft
PR code 1LF 9.59 lbf⋅ft
PR code 1LJ 9.59 lbf⋅ft
PR code 1LL 9.59 lbf⋅ft
PR code 1LM 9.59 lbf⋅ft
PR code 1LN 9.59 lbf⋅ft
PR code 1LU 9.59 lbf⋅ft
PR code 1LW 9.59 lbf⋅ft
PR code 1LX 9.59 lbf⋅ft
expand_moreBrake hose
At the brake caliper 14.75 lbf⋅ft
expand_moreBrake line
PR code 1ZK 11.8 lbf⋅ft
PR code FM0 11.8 lbf⋅ft
PR code 1LA 11.8 lbf⋅ft
PR code 1LF 11.8 lbf⋅ft
PR code 1LJ 11.8 lbf⋅ft
PR code 1LL 11.8 lbf⋅ft
PR code 1LM 10.33 lbf⋅ft
PR code 1LN 10.33 lbf⋅ft
PR code 1LP 14.01 lbf⋅ft
PR code 1LU 11.8 lbf⋅ft
PR code 1LW 10.33 lbf⋅ft
PR code 1LX 10.33 lbf⋅ft
expand_moreFront axle brake caliper
PR code 1ZK 40.57 lbf⋅ft
PR code FM0 40.57 lbf⋅ft
PR code 1LF 40.57 lbf⋅ft
PR code 1LL 40.57 lbf⋅ft
PR code 1LM 144.56 lbf⋅ft
Replace screws.
PR code 1LN 144.56 lbf⋅ft
Replace screws.
PR code 1LP 144.56 lbf⋅ft
PR code 1LU 144.56 lbf⋅ft
Replace screws.
PR code 1LW 144.56 lbf⋅ft
Replace screws.
PR code 1LX 144.56 lbf⋅ft
Replace screws.
expand_moreFront axle brake caliper mounting support
M14 × 1,5 screws 144.56 lbf⋅ft
Replace screws.
Front axle brake disc 7.38 lbf⋅ft
Wheel speed sensor 6.64 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 22.13 lbf⋅ft
Use new screw.
Steering column 14.75 lbf⋅ft
Replace screws and nuts.
expand_moreSteering gear
First stage 59 lbf⋅ft
Use new screws or nuts
Second stage 180°
Steering wheel 36.88 lbf⋅ft
Replace screws.
Track rod end on stub axle 73.76 lbf⋅ft
Replace nuts.
Track rod end on track rod 59 lbf⋅ft
Track rod on steering gear 73.76 lbf⋅ft
expand_moreFront axle suspension
expand_moreSuspension strut
expand_moreConnection clamp at the suspension strut
First stage 29.5 lbf⋅ft
Replace screws and nuts.
Second stage 180°
expand_moreConnection clamp at the transverse control arm
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 90°
On chassis 22.13 lbf⋅ft
Replace the nuts and tighten alternately
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
Use new screws.
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreStabiliser mounting at the stabiliser
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreStabiliser mounting at suspension strut
First stage 29.5 lbf⋅ft
Replace screws and nuts.
Second stage 90°
Stabilizer mounting at the subframe 18.44 lbf⋅ft
Replace nuts.
Support joint at the stub axle 29.5 lbf⋅ft
Replace screws.
expand_moreSupport joint at the transverse control arm
M12 88.51 lbf⋅ft
Replace nuts.
M14 103.26 lbf⋅ft
Replace nuts.
Front suspension cross-brace 14.75 lbf⋅ft
expand_moreLower front transverse control arm
expand_moreAt the subframe
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
expand_moreOn stub axle
M12 88.51 lbf⋅ft
Replace nuts.
M14 103.26 lbf⋅ft
Replace nuts.
expand_moreLower rear transverse control arm
expand_moreAt the subframe
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
On stub axle 103.26 lbf⋅ft
Replace nuts.
expand_moreUpper front transverse control arm
expand_moreOn chassis
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
On stub axle 29.5 lbf⋅ft
Replace nuts.
expand_moreUpper rear transverse control arm
expand_moreOn chassis
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
On stub axle 29.5 lbf⋅ft
Replace nuts.
expand_moreWheel hub wheel bearing
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreWheel bearing unit
First stage 59 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheels and tires
expand_moreTire pressure sensors
Screws 2.95 lbf⋅ft
Wheel attachment 88.51 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Audi A7 S7 Sportback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A7 S7 Sportback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2014 Audi A7 S7 Sportback you're not only saving money, but also also improving your technical skills and learning something new.

2014 Audi A7 S7 Sportback generations

In 2014 Audi offered 2 generations of the A7 S7 Sportback. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Audi A7 S7 Sportback C7 facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat