2014 Audi A6 Quattro engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system


Induction-pipe flap control unit	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m

expand_moreIntake manifold

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


Lower section of intake manifold	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten new screws crosswise in inside-to-outside order.
Upper section of intake manifold	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


Lower section of intake manifold	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten new screws crosswise in inside-to-outside order.
Upper section of intake manifold	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTE engines


First stage	Screw in new screw(s) manually as far as it goes.
Gradually tighten screws crosswise.
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	Screw in new screw(s) manually as far as it goes.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Third stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Lower section of intake manifold	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
tighten gradually cross-wise

expand_moreIntake manifold support

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


Compressor belt	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


All Audi gasoline V6 2.8 L CHVA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline V6 3.0 L CREC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CRTD engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CRTE engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CRTF engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CVUA engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CVUB engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CZVA engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CZVC engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAuxiliary drive belt tensioner

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


Compressor belt	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


All Audi gasoline V6 2.8 L CHVA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel V6 3.0 L CPNB engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi gasoline V6 3.0 L CREC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAir compressor

expand_moreAir-conditioning compressor

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAir-conditioning compressor bracket

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


Inside	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Outside	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Control tensioner


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAir-conditioning compressor pressure line

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel V6 3.0 L CLAA engines


M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll other modifications


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAlternator

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws.
Second stage	180°180°180°


Steel screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All Audi diesel V6 3.0 L CPNB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreGenerator bracket

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°


All Audi gasoline V6 3.0 L CREC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Control tensioner


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreHydraulic lines at the servo-steering pump

expand_moreAll Audi diesel V6 3.0 L CPNB engines


Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Use new seals.

expand_moreServo pump pulley


3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 580 N⋅m at 2100 RPM engine (2013.5–)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreServo steering pump


All Audi diesel V6 3.0 L CPNB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


Vacuum pump	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCarburetion

expand_moreExhaust gas return cooler


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust gas return valve


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust recirculation pipe

expand_moreAll Audi diesel V6 3.0 L CPNB engines


First stage	Screw in manually up to stop.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Clamps	1.84 lbf⋅ft1.84 lbf⋅ft2.5 N⋅m

expand_moreAll Audi diesel V6 3.0 L CVUA engines


First stage	Screw in manually up to stop.
Use new parts.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Clamps	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace nuts.

expand_moreFuel-distributing pipe


All Audi gasoline straight-4 2.0 L CAED engines	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
All Audi gasoline V6 3.0 L CGWD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CGXB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 2.8 L CHVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CREC engines	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	60°60°60°


All Audi gasoline V6 3.0 L CTUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure line


All Audi gasoline straight-4 2.0 L CAED engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
All Audi gasoline V6 3.0 L CREC engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
All Audi diesel V6 3.0 L CRTF engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CZVC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Oil thread.

expand_moreHigh-pressure pump


All Audi gasoline straight-4 2.0 L CAED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten bolts uniformly in several passes.
All Audi gasoline V6 3.0 L CGWD engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline V6 3.0 L CGXB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	Screw in manually up to stop.
Replace screws.
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	Screw in manually up to stop.
Replace screws.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi gasoline V6 3.0 L CTUA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure pump drive wheel


3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 580 N⋅m at 2100 RPM engine (2013.5–)	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m

expand_moreHigh-pressure pump pulley

expand_moreAll other modifications


Central nuts	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m


Injection hoses	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreInjection nozzle (injector)

expand_moreAll Audi diesel V6 3.0 L CPNB engines


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CRTE engines


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


Retaining clamp	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreInjection pump


High-pressure pump	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_morePressure tube connection


All Audi gasoline straight-4 2.0 L CAED engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.
All Audi gasoline V6 2.8 L CHVA engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace components.

expand_moreCharging

expand_moreCharge air pipes


First stage	Screw in manually up to stop.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCharge air compressor


All Audi gasoline V6 3.0 L CREC engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace nuts.

expand_moreAll other modifications


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_morePulley for charge-air compressor

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTurbo charger

expand_moreAll Audi diesel V6 3.0 L CPNB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CVUA engines


First stage	Screw in manually up to stop.
Use hot screw paste
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	90°90°90°

expand_moreAll other modifications


Clamps	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreTurbocharger bracket


All Audi gasoline straight-4 2.0 L CAED engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
All Audi diesel V6 3.0 L CPNB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll other modifications


First stage	Screw in new screw(s) manually as far as it goes.
Use hot screw paste
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Control tensioner
Fourth stage	90°90°90°

expand_moreTurbocharger coolant feed line

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Banjo screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.

expand_moreAll Audi diesel V6 3.0 L CVUA engines


At the turbocharger	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger coolant return line

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Banjo screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.

expand_moreAll Audi diesel V6 3.0 L CVUA engines


At the turbocharger	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger oil feed line

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreAll other modifications


At the turbocharger	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
On the engine block	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreTurbocharger oil return line


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreCooling system

expand_moreCoolant pump

expand_moreAll Audi diesel V6 3.0 L CKVB engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°


All Audi gasoline V6 3.0 L CREC engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines

expand_moreAluminium screws


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	90°90°90°

Figure 1. Cooling system, Coolant pump, Audi diesel V6 3.0 L CRTF.


Steel screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
See figure 1.


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.


Coolant pump pulley	14.75–16.96 lbf⋅ft14.75–16.96 lbf⋅ft20–23 N⋅m

expand_moreCoolant thermostat housing


3.0 TFSI quattro with gasoline V6 3.0 L 329 HP engine (2014.9–)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreCoolant pump drive wheel


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreFan wheel


All Audi gasoline straight-4 2.0 L CAED engines	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreRadiator mounting


All Audi gasoline straight-4 2.0 L CAED engines	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m

expand_moreAll other modifications


Bottom	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreBearing casing

Figure 2. Cylinder head, Camshaft bearing, Audi gasoline straight-4 2.0 L CAED, Bearing casing.


First stage	Tighten bolt(s) until hand-tight.
Replace screws. See figure 2.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°


All Audi diesel V6 3.0 L CGQB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten in steps from inside to outside.

expand_moreAll Audi gasoline V6 3.0 L CGXB engines

Figure 3. Cylinder head, Camshaft bearing, Audi gasoline V6 3.0 L CGXB.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 3.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines

Figure 4. Cylinder head, Camshaft bearing, Audi gasoline V6 2.8 L CHVA.


First stage	Screw in screw(s) by hand.
See figure 4.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CKVB engines


First stage	Screw in screw(s) by hand.
Note correct order of tensioning.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All Audi diesel V6 3.0 L CLAA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten in steps from inside to outside.

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	Screw in screw(s) by hand.
See figure 4.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CRTF engines

expand_moreScrews 1 – 4

Figure 5. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CRTF, Screws 1 – 4.


First stage	Screw in screw(s) by hand.
See figure 5.
Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m

expand_moreScrews 1 – 8

Figure 6. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CRTF, Screws 1 – 8.


Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
See figure 6.

expand_moreScrews 1 – 12


Fourth stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications

expand_moreLeft cylinder head


First stage	Tighten bolt(s) until hand-tight.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreRight cylinder head

Figure 7. Cylinder head, Camshaft bearing, All other modifications, Right cylinder head.


First stage	Screw in screw(s) by hand.
See figure 7.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCylinder head screws

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreScrews 1 – 10

Figure 8. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CAED, Screws 1 – 10.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 8.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines

expand_moreScrews 1 – 8

Figure 9. Cylinder head, Cylinder head screws, Audi gasoline V6 3.0 L CGXB, Screws 1 – 8.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 9.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreScrew 9

expand_moreFifth stage


First step	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines

expand_moreScrews 1 – 7


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 8


Fourth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Fifth stage	90°90°90°
Sixth stage	90°90°90°

expand_moreScrew 9

expand_moreSeventh stage


First step	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second step	180°180°180°

expand_moreWithout recess (screws 1 – 8)


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 9.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreWithout recess (screw 9)

expand_moreFourth stage


First step	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second step	180°180°180°

expand_moreAll Audi diesel V6 3.0 L CLAA engines

Figure 10. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CLAA.


First stage	Tighten by hand
Replace screws. See figure 10.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CPNB engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws. See figure 10.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CREC engines

Figure 11. Cylinder head, Cylinder head screws, Audi gasoline V6 3.0 L CREC.


First stage	Screw in screw(s) by hand.
Use new screws. See figure 11.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll other modifications

Figure 12. Cylinder head, Cylinder head screws, All other modifications.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 12.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°
Sixth stage	90°90°90°

expand_moreCylinder head screws shank length (new)


3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 580 N⋅m at 2100 RPM engine (2013.5–)	6.26 in6.26 in159 mm

expand_moreValve cover

expand_moreAll Audi diesel V6 3.0 L CKVB engines

Figure 13. Cylinder head, Valve cover, Audi diesel V6 3.0 L CKVB.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 13.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAA engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws crosswise in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	Screw in screw(s) by hand.
Tighten screws crosswise.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten the screws cross-wise from inside to outside.


Valve cover locking screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace screws.

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°
Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreAll Audi gasoline V6 2.8 L CHVA engines

expand_moreSprocket wheel


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAA engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreCentral nuts


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Shaft must be replaced when the screw connection has been loosened.
Second stage	90°90°90°


Wheel	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines

expand_moreSprocket wheel


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace screws.

expand_moreBalance shaft module

expand_moreAll Audi gasoline V6 3.0 L CREC engines


Bearing cap	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.

expand_moreAll other modifications

expand_moreBalance weight


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace screws.

expand_moreConnecting rod bearing

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws and nuts. Oil screws slightly.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCrankcase ventilation


All Audi gasoline V6 2.8 L CHVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CREC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCrankshaft central screws

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreDrive plate

expand_moreOn crankshaft


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°


Engine block closure screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreFlywheel


To drive plate	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.

expand_moreMain bearing

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrews 1 – 11

Figure 14. Engine block, Main bearing, Audi gasoline straight-4 2.0 L CAED, Screws 1 – 11.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 14.

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines

expand_moreScrews 1 – 16


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


Screws 17 – 31	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline V6 2.8 L CHVA engines

expand_moreScrews 1 – 16


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreScrews 17 – 31


Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Fourth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CKVB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreSecond stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Second step	180°180°180°

expand_moreAll Audi diesel V6 3.0 L CLAA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreSecond stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
first tighten crosswise inside, then outside
Second step	180°180°180°

expand_moreAll Audi gasoline V6 3.0 L CREC engines

expand_moreScrews 1 – 16


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreScrews 17 – 31


Third stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Fourth stage	90°90°90°

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	180°180°180°

expand_moreVibration damper

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine control


Balance shaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Balance shaft timing chain tension rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBottom part of the control unit housing

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreScrews 1 – 15

Figure 15. Engine control, Bottom part of the control unit housing, Audi gasoline straight-4 2.0 L CAED, Screws 1 – 15.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 15.
Second stage	45°45°45°

expand_moreScrews 1 – 8

Figure 16. Engine control, Bottom part of the control unit housing, Audi gasoline straight-4 2.0 L CAED, Screws 1 – 8.


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws. See figure 16.
Second stage	45°45°45°

expand_moreAll other modifications

expand_moreScrews 1 – 9


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Third stage	90°90°90°

expand_moreScrew 10


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Fourth stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 6 – 8


Fifth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Sixth stage	90°90°90°

expand_moreScrew 9


Sixth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Seventh stage	180°180°180°

expand_moreCamshaft adjuster

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Camshaft adjuster valve	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screw. (left-hand thread)

expand_moreOutlet camshaft central screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCamshaft timing chain guide rail


2.0 TFSI quattro with gasoline straight-4 2.0 L 217 HP engine (2013.5–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCamshaft timing chain tensioner


All Audi gasoline straight-4 2.0 L CAED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CGWD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CGXB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 2.8 L CHVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CREC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace screws.
All Audi gasoline V6 3.0 L CTUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCamshaft timing chain tensioning rail


All Audi gasoline straight-4 2.0 L CAED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel V6 3.0 L CPNB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCamshaft timing gear


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreChain tensioner

expand_moreHigh-pressure pump


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreControl drive chain tensioner


All Audi diesel V6 3.0 L CPNB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace screws.

expand_moreControl drive chain tensioning rail


All Audi diesel V6 3.0 L CPNB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreControl drive sprocket wheel

expand_moreAll Audi gasoline V6 2.8 L CHVA engines

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM6


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CPNB engines


M10	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreM6


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CREC engines

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM6


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreAt the bearing pedestal

expand_moreScrews


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreBearing pedestal


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreCentral screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreControl drive timing chain slip rail

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CPNB engines


Bottom	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Use screw-locking compound.

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreDrive chain balance shaft tensioner


All Audi gasoline straight-4 2.0 L CAED engines	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreHigh-pressure pump tension roller


3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 580 N⋅m at 2100 RPM engine (2013.5–)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreInjection pump drive belt tensioning roller


3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 580 N⋅m at 2100 RPM engine (2013.5–)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreInlet camshaft wheel

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace screws.

expand_moreIntermediate shaft chain sprocket

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fourth stage	90°90°90°

expand_moreOil pump drive chain tensioner


All Audi gasoline straight-4 2.0 L CAED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi gasoline V6 2.8 L CHVA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CPNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CREC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	90°90°90°

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOutlet camshaft wheel

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace screws.


Tension rail bearing screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreTensioning chain of oil pump drive chain


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTiming case cover

expand_moreAll Audi gasoline V6 3.0 L CGXB engines

expand_moreScrews 1 – 11

Figure 17. Engine control, Timing case cover, Audi gasoline V6 3.0 L CGXB, Screws 1 – 11.


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws. See figure 17.

expand_moreScrews 1, 2, 3, 5, 6, and 8


Second stage	90°90°90°

expand_moreScrews 9 – 11

expand_moreThird stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreScrew 4


Fourth stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreScrew 7

expand_moreFifth stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	180°180°180°

expand_moreAll Audi diesel V6 3.0 L CKVB engines

expand_moreScrews 1 – 4

Figure 18. Engine control, Timing case cover, Audi diesel V6 3.0 L CKVB, Screws 1 – 4.


First stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
See figure 18.

expand_moreScrews 5 – 24


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Control tensioner
Fifth stage	90°90°90°

expand_moreScrews 5 – 10


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll other modifications


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreTiming case cover first cylinder row

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CKVB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts and tighten crosswise.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CPNB engines

expand_moreM6 × 20 screws


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts and tighten crosswise.
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Fourth stage	90°90°90°

expand_moreM6 × 30 screws


Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	Screw in screw(s) by hand.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Control tensioner
Fourth stage	90°90°90°

expand_moreTiming case cover second cylinder row

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CKVB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts and tighten crosswise.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CPNB engines

expand_moreM6 × 20 screws


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts and tighten crosswise.
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Fourth stage	90°90°90°

expand_moreM6 × 30 screws


Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	Screw in screw(s) by hand.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Control tensioner
Fourth stage	90°90°90°

expand_moreToothed belt guard


Coolant pump	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Top part of control unit housing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreEngine lubrication

expand_moreOil cooler


All Audi gasoline straight-4 2.0 L CAED engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	90°90°90°


All Audi diesel V6 3.0 L CPNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	90°90°90°


All Audi diesel V6 3.0 L CVUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CVUB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Gradually tighten screws crosswise.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Oil drain plug	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.

expand_moreOil filter


All Audi gasoline straight-4 2.0 L CAED engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Slightly oil sealing lips.

expand_moreAll Audi gasoline V6 3.0 L CREC engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Slightly oil sealing lips.

expand_moreAll other modifications


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Slightly oil sealing lips.

expand_moreOil filter housing

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


First stage	Tighten by hand
Use new screws and tighten them crosswise.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Screws	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m


All Audi gasoline V6 2.8 L CHVA engines	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll Audi diesel V6 3.0 L CLAA engines


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel V6 3.0 L CPNB engines


Cap	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Otherwise	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOil pressure sensor

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace sealing rings.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump

expand_moreAll Audi diesel V6 3.0 L CLAA engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CRTF engines


First stage	Screw in screw(s) by hand
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreOil pump chain wheel

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CRTF engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreAll Audi diesel V6 3.0 L CVUA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	45°45°45°


All Audi diesel V6 3.0 L CZVC engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreOil sump lower part

Figure 19. Engine lubrication, Oil sump, Audi gasoline straight-4 2.0 L CAED, Oil sump lower part.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 19.
Second stage	45°45°45°

expand_moreOil sump top part

Figure 20. Engine lubrication, Oil sump, Audi gasoline straight-4 2.0 L CAED, Oil sump top part.


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws. See figure 20.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines

Figure 21. Engine lubrication, Oil sump, Audi gasoline V6 3.0 L CGXB.

expand_moreOil sump lower part
See figure 21.


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump top part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


Oil sump lower part	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil sump top part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CKVB engines

expand_moreOil sump lower part
See figure 21.


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second stage	90°90°90°

Figure 22. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CKVB.

expand_moreOil sump top part
See figure 22.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°
Locking screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
TDC marking.

expand_moreAll Audi diesel V6 3.0 L CLAA engines

expand_moreOil sump lower part


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten new screws crosswise in outside-to-inside order.
Second stage	90°90°90°
Locking screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
TDC marking.

expand_moreAll Audi diesel V6 3.0 L CPNB engines

expand_moreAt the gearbox

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts and tighten crosswise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreOil sump top part on the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CREC engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten the screws crosswise.
Second stage	90°90°90°


Oil sump top part	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten the screws crosswise.

expand_moreAll other modifications

expand_moreOil sump lower part

Figure 23. Engine lubrication, Oil sump, All other modifications, Oil sump lower part.


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
See figure 23.
Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Third stage	45°45°45°

expand_moreOil sump top part


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	180°180°180°

expand_moreEngine management

expand_moreCamshaft sensor


All Audi diesel V6 3.0 L CRTD engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CRTE engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CRTF engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CVUA engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CVUB engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CZVA engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CZVC engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCharge air pressure sensor


All Audi gasoline V6 3.0 L CREC engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi diesel V6 3.0 L CRTF engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CVUA engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CVUB engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All Audi diesel V6 3.0 L CZVC engines	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCrankshaft sensor


All Audi gasoline straight-4 2.0 L CAED engines	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust gas temperature sensor


All Audi diesel V6 3.0 L CRTD engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CRTE engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CZVA engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All other modifications	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Use hot screw paste

expand_moreGlow plugs


All Audi diesel V6 3.0 L CRTD engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CRTE engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CRTF engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CVUA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CVUB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CZVA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CZVC engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All other modifications	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreKnock sensor


All Audi gasoline straight-4 2.0 L CAED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreLambda sensor


All Audi diesel V6 3.0 L CPNB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel V6 3.0 L CRTD engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CRTE engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CRTF engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CVUA engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CVUB engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CZVA engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CZVC engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste
All other modifications	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Use hot screw paste

expand_moreNOx sensor


All other modifications	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
Use hot screw paste

expand_moreEngine mounting

expand_moreEngine bracket


All Audi gasoline V6 3.0 L CGWD engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline V6 3.0 L CGXB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline V6 3.0 L CTUA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine mounting


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreSubframe

expand_moreM12 × 100 screws


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM12 × 35 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM12 × 55 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreSubframe diagonal strut

expand_moreM12 × 35 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	180°180°180°

expand_moreM12 × 55 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	180°180°180°

expand_moreTorque arm

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


Torque support bracket	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


All Audi gasoline straight-4 2.0 L CAED engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts. Use hot screw paste.
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace the nuts and use fitting paste


Catalytic converter bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreDiesel particulate filter

expand_moreAll Audi diesel V6 3.0 L CRTE engines


Clamps	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Otherwise	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_moreAll Audi diesel V6 3.0 L CRTF engines


At the turbocharger	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Otherwise	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts. Use hot screw paste.


Differential pressure sensor lines	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Use hot screw paste

expand_moreExhaust manifold

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts. Use hot screw paste.

expand_moreTop

Figure 24. Exhaust system, Exhaust manifold, Audi gasoline straight-4 2.0 L CAED, Top.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts. Use hot screw paste. See figure 24.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel V6 3.0 L CGQB engines


At the cylinder head	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAt the turbocharger


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CKVB engines


At the cylinder head	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAt the turbocharger


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Use hot screw paste.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAA engines


At the cylinder head	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and tighten alternately

expand_moreAt the turbocharger


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CREC engines


First stage	Screw in manually up to stop.
Replace nuts. Use hot screw paste.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten in steps from inside to outside.
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Tighten new nuts evenly in several steps.


Exhaust manifold heat shields	7.38–8.85 lbf⋅ft7.38–8.85 lbf⋅ft10–12 N⋅m
Exhaust pipe	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.
Exhaust pipe bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Exhaust pipe rear	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreParticle filter bracket


All Audi diesel V6 3.0 L CPNB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.
All Audi diesel V6 3.0 L CRTD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CRTE engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CZVA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


First stage	Screw in manually up to stop.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Primary catalytic converter	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_moreFuel supply

expand_moreFuel filter bracket


All Audi diesel V6 3.0 L CPNB engines	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
All other modifications	1.55 lbf⋅ft1.55 lbf⋅ft2.1 N⋅m


Fuel pump	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m

expand_moreIgnition system


Spark plugs	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreStart system

expand_moreStarter

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CGXB engines


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 2.8 L CHVA engines


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Reuse screws only 1 times.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CPNB engines	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAll other modifications


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Audi A6 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2014 Audi A6 Quattro you're not only saving money, but also also improving your technical skills and learning something new.

2014 Audi A6 Quattro generations

In 2014 Audi offered 2 generations of the A6 Quattro. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

C7

Type 4G2, Type 4GC

2014 Audi A6 Quattro C7 facelift Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2014 Audi A6 Quattro generations

C7

Audi A6 Quattro C7 facelift model years

Suggest edit