2022 Audi A5 Quattro engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	Screw in new screw(s) manually as far as it goes.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


Lower section of intake manifold	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Upper section of intake manifold	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.

expand_moreIntake manifold support

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in screw manually up to stop.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


Audi diesel straight-4 2.0 L CNHA 188 HP	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Audi gasoline straight-4 2.0 L CAEB 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Audi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Audi gasoline V6 3.2 L CALA 261 HP	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


Compressor belt	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAuxiliary drive belt tensioner


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	180°180°180°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CCWB 208 HP

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


Audi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Audi gasoline straight-4 2.0 L CAEB 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°


Audi gasoline V6 3.2 L CALA 261 HP	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


Compressor belt	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAir-conditioning compressor

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAir-conditioning compressor bracket


All Audi diesel V6 3.0 L CDUC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°


All Audi diesel V6 3.0 L CKVB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CKVC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAir-conditioning compressor pressure line


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAlternator

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws.
Second stage	180°180°180°


Steel screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws.
Second stage	180°180°180°


Steel screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreGenerator bracket

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 30 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 52 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CDUC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°


All Audi diesel V6 3.0 L CKVB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CKVC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in screw manually up to stop.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreMedium screws at the bottom


Third stage	45°45°45°

expand_moreTop screws


Fourth stage	180°180°180°

expand_moreAll other modifications


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°


Power steering pump bracket	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreHydraulic lines at the servo-steering pump


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m


Servo pump pulley	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Servo steering pump	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Vacuum pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
2 pieces

expand_moreCarburetion

expand_moreExhaust gas return cooler

expand_more2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)

expand_moreOn the engine block


First stage	Screw in screw manually up to stop.
Use new seals.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreExhaust gas return valve


2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFuel-distributing pipe


Audi diesel straight-4 2.0 L CNHA 188 HP	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Audi gasoline straight-4 2.0 L CPMB 217 HP	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Audi gasoline straight-4 2.0 L CAED 217 HP	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Audi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Audi gasoline V6 3.2 L CALA 261 HP	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Audi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure line


Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


Union nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All other modifications	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreHigh-pressure pump

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreSecond stage


Long screws	180°180°180°
Short screws	45°45°45°


Audi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Audi diesel V6 3.0 L CKVC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Audi diesel V6 3.0 L CKVB 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Audi gasoline V6 3.2 L CALA 261 HP	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten bolts uniformly in several passes.

expand_moreHigh-pressure pump pulley

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.


All Audi diesel straight-4 2.0 L CNHA engines	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
All other modifications	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m


Injection hoses	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreInjection nozzle (injector)


All Audi diesel V6 3.0 L CDUC engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


All Audi diesel V6 3.0 L CKVB engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
All Audi diesel V6 3.0 L CKVC engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Use new screws.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	180°180°180°

expand_moreAll other modifications


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreInjection pump


All Audi diesel straight-4 2.0 L CAHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


High-pressure pump	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_morePressure tube connection


All Audi gasoline straight-4 2.0 L CAED engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


On high-pressure pump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.
On rail	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.


All Audi gasoline straight-4 2.0 L CPMB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.

expand_moreCharging

expand_moreCharge air pipes


All Audi diesel V6 3.0 L CAPA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreCharge air compressor

expand_more3.0 TFSI quattro with gasoline V6 3.0 L 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM engine (2011.12–)


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreTurbo charger


All Audi diesel straight-4 2.0 L CAHA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste
All Audi diesel straight-4 2.0 L CGLC engines	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace nuts.
All Audi gasoline straight-4 2.0 L CNCD engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws. Use hot screw paste.

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreTurbocharger bracket


All Audi gasoline straight-4 2.0 L CAED engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in new screw(s) manually as far as it goes.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi gasoline straight-4 2.0 L CPMB engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreTurbocharger coolant feed line

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Banjo screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger coolant return line

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Banjo screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger oil feed line

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
On the engine block	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreTurbocharger oil return line


All Audi gasoline straight-4 2.0 L CAED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
On the engine block	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All Audi gasoline straight-4 2.0 L CPMB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreCooling system

expand_moreCoolant pump


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.

expand_moreCoolant pump pulley


Audi gasoline V6 3.2 L CALA 261 HP	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Audi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCoolant pump drive wheel


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreFan wheel


All Audi gasoline straight-4 2.0 L CAED engines	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
All Audi gasoline straight-4 2.0 L CPMB engines	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m


Radiator mounting	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing


Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten gradually and alternately from inside to outside.

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	Tighten bolt(s) until hand-tight.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	Tighten by hand
Tighten gradually and alternately from inside to outside.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP

expand_moreBearing casing


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreBearing casing


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	Tighten by hand
Tighten gradually and alternately from inside to outside.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	Screw in screw(s) by hand.
Note correct order of tensioning.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	Screw in screw(s) by hand.
Use new screws.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreCylinder head screws

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 9 – 10


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Sixth stage	90°90°90°
Seventh stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	Tighten by hand
Replace screws.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP

expand_moreScrews 1 – 7


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 8


Fourth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Fifth stage	90°90°90°
Sixth stage	90°90°90°

expand_moreScrew 9


Seventh stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM

expand_moreScrews (M6)

expand_moreFourth stage


First step	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreCylinder head screws shank length (new)


All Audi diesel straight-4 2.0 L CAHA engines	5.39 in5.39 in137 mm
All Audi diesel V6 3.0 L CAPA engines	6.1 in6.1 in155 mm
All Audi diesel V6 3.0 L CCWA engines	6.1 in6.1 in155 mm
All Audi diesel V6 3.0 L CCWB engines	6.1 in6.1 in155 mm

expand_moreValve cover


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten cross-wise.

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


First stage	Tighten by hand
Tighten cross-wise.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten the screws cross-wise from inside to outside.


Valve cover locking screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM

expand_moreBalance shaft module


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


Audi diesel V6 3.0 L CCWB 208 HP	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace screws.

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°


Audi diesel V6 3.0 L CCWA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Audi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreCentral nuts


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Shaft must be replaced when the screw connection has been loosened.
Second stage	90°90°90°


Wheel	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreWheel


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreWheel


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreConnecting rod bearing

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°
Oil screw head support and thread.

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCrankcase ventilation

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten screws crosswise.


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten screws crosswise.

expand_moreCrankshaft central screws

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Replace screws.
Second stage	90°90°90°
Oil screw head support and thread.
Third stage	45°45°45°

expand_moreAll other modifications


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreCrankshaft pulley


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreDrive plate

expand_moreOn crankshaft


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine block closure screws


All Audi diesel V6 3.0 L CDUC engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi diesel V6 3.0 L CKVB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi diesel V6 3.0 L CKVC engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi gasoline V6 3.0 L CMUA engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.

expand_moreFlywheel

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


0B2 gearbox	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.

expand_moreAll other modifications


To drive plate	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.

expand_moreMain bearing

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM

expand_moreBalance shaft module

expand_moreScrews 1 – 6


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fifth stage	90°90°90°

expand_moreScrews 5 – 6


Third stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreScrews 1 – 4


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBearing cap


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°


Audi diesel straight-4 2.0 L CNHA 188 HP	Component must not be knocked down.

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Alternately, first inside and then outside
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Third stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM

expand_moreM10


First stage	Tighten by hand
Replace screws.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreLateral-fitting screws (M8)


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP

expand_moreScrews 1 – 11


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreScrews 1 – 11


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Alternately, first inside and then outside
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Third stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreSecond stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Second step	180°180°180°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP

expand_moreScrews 1 – 16


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


Screws 17 – 31	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM

expand_moreScrews 1 – 16

expand_moreFirst stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 17 – 31


Second stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreVibration damper

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine control


Balance shaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Balance shaft timing chain tension rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBottom part of the control unit housing

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines

expand_moreScrews 1 – 15


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreScrews 1 – 8


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 8


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the screws cross-wise from inside to outside.

expand_moreM6


Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreM8


Third stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCamshaft adjuster

expand_moreAll Audi gasoline straight-4 2.0 L CAED engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Camshaft adjuster valve	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screw. (left-hand thread)

expand_moreOutlet camshaft central screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreCamshaft adjuster valve


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Left-hand thread

expand_moreCamshaft drive belt deflection pulley

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolt.
Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace the stud bolt.
Otherwise	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.


Camshaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail


All Audi gasoline straight-4 2.0 L CAEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCamshaft timing chain tensioner

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Camshaft timing chain tensioning rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing gear

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi diesel V6 3.0 L CDUC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All Audi diesel V6 3.0 L CKVB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Clamping screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications

expand_moreHigh pressure pump belt


Central screws	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m


Otherwise	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


Chain tensioner	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreControl drive chain guide rail

expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.6–)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreControl drive chain tensioner


Audi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Audi gasoline straight-4 2.0 L CAEB 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°


Audi gasoline V6 3.2 L CALA 261 HP	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Audi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreControl drive chain tensioning rail


All Audi diesel V6 3.0 L CDUC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreControl drive sprocket wheel

expand_moreAudi gasoline V6 3.2 L CALA 261 HP

expand_moreBearing pedestal


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreM6


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Use new screw.
Second stage	60°60°60°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM

expand_moreAt the bearing pedestal

expand_moreScrews


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreBearing pedestal

expand_moreOn the engine block


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOn the engine block

expand_moreCentral screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications


M10	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreM6


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreControl drive timing chain slip rail

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


Bottom	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Use screw-locking compound.

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


Threaded screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreControl unit for intake valve timing


2.0 TFSI quattro with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–)	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreDrive chain balance shaft tensioner

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m


Injection pump drive belt tensioning roller	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreInlet camshaft wheel

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreIntermediate shaft chain sprocket

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace the screws and sprocket wheel.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreBalance shaft module


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fourth stage	90°90°90°

expand_moreOil pump drive chain tensioner

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOutlet camshaft wheel

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreTension rail bearing screws


All Audi diesel V6 3.0 L CDUC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreTiming case cover

expand_moreAudi gasoline V6 3.2 L CALA 261 HP

expand_moreScrew 1


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 2 – 11


Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreScrews 9 – 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreScrew 4


Fifth stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM

expand_moreScrew 1


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.

expand_moreScrews 2 – 11


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.

expand_moreScrews 1, 2, 3, 6, and 8


Third stage	90°90°90°

expand_moreScrews 9 – 11

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreScrew 4


Fifth stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreScrew 7

expand_moreSixth stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	90°90°90°

expand_moreAll other modifications

expand_moreScrews 1 – 4


First stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 5 – 24


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Control tensioner
Fifth stage	90°90°90°

expand_moreScrews 5 – 10


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreTiming case cover first cylinder row

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTiming case cover second cylinder row

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreToothed belt guard


Coolant pump	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreToothed belt guard at the bottom


All Audi diesel straight-4 2.0 L CAHA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi diesel straight-4 2.0 L CGLC engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreToothed belt guard at the top


2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m


Toothed belt guard center	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt tensioning roller

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°
Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace the stud bolt.

expand_moreAll other modifications

expand_moreHigh pressure pump belt


Central screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreTop part of control unit housing

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreEngine lubrication

expand_moreOil cooler


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Audi diesel straight-4 2.0 L CNHA 188 HP	Component must not be knocked down.
Audi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Audi gasoline straight-4 2.0 L CAEB 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Audi gasoline straight-4 2.0 L CAED 217 HP	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Audi gasoline straight-4 2.0 L CPMB 217 HP	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOil drain plug

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


Plastic oil sump	Tighten screw up to the stop.
Replace sealing rings.
Sheet-steel sump	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.


All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.

expand_moreOil filter


All Audi gasoline straight-4 2.0 L CAED engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Slightly oil sealing lips.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All Audi gasoline straight-4 2.0 L CPMB engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
All other modifications	14.75–17.7 lbf⋅ft14.75–17.7 lbf⋅ft20–24 N⋅m

expand_moreOil filter housing

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Tighten alternately starting from the top left
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


Cap	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Otherwise	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


First stage	Tighten by hand
Use new screws and tighten them crosswise.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


First stage	Screw in screws by hand.
Use new screws and tighten them crosswise.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


Cap	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Otherwise	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m


Oil pressure sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump chain wheel

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreOil sump

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM

expand_moreAt the gearbox


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°


On the engine block	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
tighten gradually cross-wise

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAt the gearbox


Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°
Tighten cross-wise.

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM

expand_moreOil sump lower part

expand_moreFrom sheet metal


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreWith plastic housing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump top part

expand_moreScrews 1 – 14


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreScrew 10


Fourth stage	180°180°180°

expand_moreScrews 11 – 14


Fifth stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM

expand_moreOil sump lower part


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreOil sump top part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreAt the gearbox (M10)


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	105°105°105°

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the screws crosswise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Third stage	90°90°90°

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°
Locking screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
TDC marking.

expand_moreOil sump top part on the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreEngine management

expand_moreCamshaft sensor


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCharge air pressure sensor


All Audi diesel straight-4 2.0 L CNHA engines	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCrankshaft sensor


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
Audi diesel straight-4 2.0 L CNHA 188 HP	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
Audi gasoline straight-4 2.0 L CAEB 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
Audi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
Audi gasoline straight-4 2.0 L CAED 217 HP	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
Audi gasoline straight-4 2.0 L CPMB 217 HP	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust gas temperature sensor

expand_more2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)


On exhaust manifold	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreGlow plugs

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


With combustion chamber pressure sensor	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Without combustion chamber pressure sensor	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m


All other modifications	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreKnock sensor

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreLambda sensor


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Audi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
All other modifications	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreNOx sensor


2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket


On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine mounting

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe

expand_moreAudi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM

expand_moreOn chassis


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°
Tighten alternately first at the front, then at the rear.

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°
Tighten alternately first at the front, then at the rear.

expand_moreAll other modifications


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe diagonal strut

expand_moreAudi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM

expand_moreM12 × 42 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	135°135°135°

expand_moreM12 × 50 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCE 227 HP at 4700 RPM, 350 N⋅m at 1500 RPM


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM

expand_moreM12 × 42 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	135°135°135°

expand_moreM12 × 50 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreFirst stage


With electric servo-steering	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
With hydraulic servo-steering	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.

expand_moreSecond stage


With electric servo-steering	90°90°90°
With hydraulic servo-steering	135°135°135°

expand_moreTorque arm

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines

expand_moreOn chassis


Cross support	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreOn chassis


Cross support	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
On engine	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreTorque support bracket


2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.8–)	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace the nuts and use fitting paste
Audi gasoline V6 3.2 L CALA 261 HP	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nut.
Audi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace the nuts and use fitting paste


Catalytic converter bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreDiesel particulate filter

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Second stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts. Use hot screw paste.

expand_moreDifferential pressure sensor lines


2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreExhaust manifold

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


First stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Tighten screws from the inside outwards.
Second stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Third stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Control tensioner

expand_moreAudi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace the nuts and use fitting paste

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts. Use hot screw paste.

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts. Use hot screw paste.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


At the cylinder head	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAt the turbocharger


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Use hot screw paste.
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace nuts.
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreExhaust manifold heat shields


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreExhaust pipe

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws and nuts.
Second stage	90°90°90°


Audi gasoline straight-4 2.0 L CAEB 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Audi gasoline straight-4 2.0 L CDNC 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Audi gasoline straight-4 2.0 L CAED 217 HP	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.
Audi gasoline straight-4 2.0 L CPMB 217 HP	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


Clamps	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws and nuts.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_moreExhaust pipe bracket


All Audi diesel V6 3.0 L CAPA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CCWA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CCWB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreExhaust pipe rear


All Audi gasoline straight-4 2.0 L CAED engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Clamps	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 2.0 L CPMB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreParticle filter bracket

expand_more2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Second stage	90°90°90°
slacken
Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morePrimary catalytic converter


2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_moreFuel supply


Fuel filter bracket	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFuel pump

expand_more2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–)


Preliminary feed pump	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreIgnition system


Spark plugs	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreStart system

expand_moreStarter

expand_moreAudi diesel straight-4 2.0 L CNHA 188 HP


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAudi diesel V6 3.0 L CCWB 208 HP


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	105°105°105°

expand_moreAudi gasoline straight-4 2.0 L CAED 217 HP


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAudi gasoline straight-4 2.0 L CNCD 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CAPA 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	105°105°105°

expand_moreAudi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAudi gasoline V6 3.2 L CALA 261 HP

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	105°105°105°

expand_moreClass 10.9


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAudi gasoline V6 3.0 L CMUA 268 HP at 4780 RPM, 400 N⋅m at 2150 RPM


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll other modifications


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Property class 10.9

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2022 Audi A5 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A5 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2022 Audi A5 Quattro you're not only saving money, but also also improving your technical skills and learning something new.

2022 Audi A5 Quattro First generation facelift Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Audi A5 Quattro First generation facelift model years

Suggest edit