2009 Alfa Romeo Mito Series 1 Cooling Fluid Capacity
For 2009 Mito Series 1 Alfa Romeo recommends to use: CUNA NC 596-16, ASTM D 3306, and CUNA NC 956-16 cooling fluids. To select the right cooling fluid see the table below.
How much cooling fluid you need to put into 2009 Mito depends on the engine installed, and some other conditions listed below.
in your garage to make future searches easy.
Condition | Volume |
---|
Alfa Romeo diesel straight-4 1.6 L 955 A4.000 114 HP, 320 N⋅m at 1750 RPM | 6.02 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 | |
Alfa Romeo diesel straight-4 1.6 L 955 A3.000 118 HP at 3750 RPM, 320 N⋅m at 1750 RPM | 6.02 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 | |
Alfa Romeo diesel straight-4 1.6 L 198 A2.000 118 HP at 4000 RPM, 300 N⋅m at 1500 RPM | 6.02 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 | |
Alfa Romeo gasoline straight-4 1.4 L 955 A1.000 78 HP | 5.49 US qt. |
Cooling fluid: CUNA NC 956-16, ASTM D 3306 | |
Alfa Romeo diesel straight-4 1.2 L 199 A3.000 89 HP | 7.61 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 | |
Alfa Romeo gasoline straight-4 1.4 L 199 A6.000 94 HP | 5.49 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 | |
Alfa Romeo diesel straight-4 1.2 L 199 B1.000 94 HP at 4000 RPM, 200 N⋅m at 1500 RPM | 7.61 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 | |
All other modifications | 6.34 US qt. |
Cooling fluid: CUNA NC 596-16, ASTM D 3306 |
Changing cooling fluid it's a bit tricky process but it can be done by yourself. The whole process will take 1–2 hours because you need to cool down the engine, and it will save you up to $150.
To replace coolant in 2009 Alfa Romeo Mito first you need to flush old fluid. Start with a cool engine. Drain the overflow reservoir first, then open the radiator cap, and open the radiator drain cock. After that check for cooling fluid drain plugs on the engine block. If your car have those unscrew them and drain coolant from the engine block. If you want to clean the system pour coolant cleaner and start the engine. Read the coolant cleaner manual and follow the product directions. Then flush coolant cleaner as you've flushed coolant before. The final step is to pour new coolant.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 Alfa Romeo Mito user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Alfa Romeo warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Alfa Romeo Mito service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2009 Alfa Romeo Mito you're not only saving money, but also also improving your technical skills and learning something new.