2013 Volkswagen Transporter Box Van transmission fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAxle drive

expand_moreAWD clutch oil control screws


All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Sealing rings must be replaced.


AWD clutch oil drain plug	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Drive shaft heat protection plate	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreDrive shaft intermediate bearing


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°

expand_moreFront axle drive shaft

expand_moreAt the gearbox


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreCentral nuts


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Nuts must be replaced.
Second stage	180° detach.
Third stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m

expand_morePropeller shaft intermediate bearing


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_morePropeller shaft

expand_moreM8


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws must be replaced.

expand_moreSecond stage


First step	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second step	90°90°90°

expand_moreM10


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws must be replaced.

expand_moreSecond stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Second step	90°90°90°

expand_moreRear axle drive shaft

expand_more2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP engine (2010.5–)

expand_moreCentral nuts


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Nuts must be replaced.
Second stage	180° detach.
Third stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m

expand_more2.0 TSI 4motion with gasoline straight-4 2.0 L 201 HP, 350 N⋅m at 1500 RPM engine (2011.7–)

expand_moreCentral nuts


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Nuts must be replaced.
Second stage	180° detach.
Third stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m

expand_moreAll other modifications

expand_moreAt the gearbox


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°


Central nuts	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Nuts must be replaced.

expand_moreClutch


Clutch master cylinder	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Nuts must be replaced.

expand_moreClutch pressure plate


Flywheel	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Gradually tighten screws crosswise.

expand_moreDual-mass flywheel


M6	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Gradually tighten screws crosswise.
M7	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Gradually tighten screws crosswise.

expand_moreClutch slave cylinder


2.0 with gasoline straight-4 2.0 L 114 HP at 5200 RPM, 170 N⋅m at 2600 RPM engine (2003.11–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Screws must be replaced.

expand_moreDifferential

expand_moreRear axle differential bracket

expand_moreOn axle

expand_moreM12 × 60 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreM12 × 80 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreOn chassis

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreM12


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreRear axle differential oil control screws


2.0 BiTDI 4motion with diesel straight-4 2.0 L 177 HP at 4000 RPM, 4000 N⋅m at 1500 RPM engine (2009.9–)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP engine (2010.5–)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP engine (2010.5–)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 3500 RPM, 340 N⋅m at 1750 RPM engine (2009.9–)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 3500 RPM, 340 N⋅m at 1750 RPM engine (2009.9–)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
2.0 TSI 4motion with gasoline straight-4 2.0 L 201 HP, 350 N⋅m at 1500 RPM engine (2011.7–)	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreGear shifting


Gearbox shift lever	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Nuts must be replaced.
Selector cable linkage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreGearbox

expand_moreGearbox flange connection at engine

expand_moreM10


2.0 with gasoline straight-4 2.0 L 114 HP at 5200 RPM, 170 N⋅m at 2600 RPM engine (2003.11–)	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


M12	59 lbf⋅ft59 lbf⋅ft80 N⋅m


Torque converter	42.04 lbf⋅ft42.04 lbf⋅ft57 N⋅m

expand_moreGearbox lubrication

expand_moreDistributor gearbox oil control screws


M10	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M20	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m


Distributor gearbox oil filler screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreGearbox oil drain plug


5-speed 02Z transmission	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more0BT transmission


Overflow pipe	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m

expand_moreLocking screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
Second stage	15°15°15°

expand_more6-speed 0A5 transmission


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m


Automatic gearbox 09K	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Seals must be replaced.

expand_moreGearbox oil filler plug


5-speed 02Z transmission	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more6-speed 0A5 transmission


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_more0BT transmission


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
Second stage	15°15°15°

expand_moreGearbox oil filter cover


0BT transmission	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreGearbox oil sump

expand_more0BT transmission


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws must be replaced.
Second stage	45°45°45°

expand_moreGearbox mounting

expand_moreAt the gearbox


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreOn chassis


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreTransfer case


Bevel gear mounting	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreTransfer box onto transmission flange connection

expand_more2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP engine (2010.5–)


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Second stage	35°35°35°

expand_more2.0 TSI 4motion with gasoline straight-4 2.0 L 201 HP, 350 N⋅m at 1500 RPM engine (2011.7–)


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Second stage	35°35°35°

expand_moreAll other modifications


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
Second stage	45°45°45°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Volkswagen Transporter Box Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Transporter Box Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Volkswagen Transporter Box Van you're not only saving money, but also also improving your technical skills and learning something new.

2013 Volkswagen Transporter Box Van T5.2 (T5 facelift) Transmission Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Volkswagen Transporter Box Van T5.2 (T5 facelift) model years

Suggest edit