2013 Volkswagen Sharan front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake

expand_moreBleed valve


PR code 1LJ	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
PR code 1LW	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m


Brake hose	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Brake line	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreFront axle brake caliper


PR code 1LJ	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
PR code 1LW	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Screws must be replaced.


Front axle brake caliper mounting support	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Clean the ribbing
Front axle brake disc	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Wheel speed sensor	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFront axle steering


Lower steering column joint	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Screws must be replaced.

expand_moreSteering gear

expand_moreAt the subframe


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreTrack rod end on stub axle


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Screws must be replaced.
Second stage	180° detach
Otherwise	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m


Track rod end on track rod	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Track rod on steering gear	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreFront axle suspension

expand_moreShock absorber


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreNuts


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws and nuts must be replaced.
Second stage	90°90°90°


Shock-absorber piston rod	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Nuts must be replaced.

expand_moreSuspension strut

expand_moreOn chassis


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreOn stub axle


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Nuts must be replaced.
Second stage	90°90°90°

expand_moreWheel suspension

expand_moreFront axle drive shaft


M10	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.

expand_moreCentral screws

Figure 1. Wheel suspension, Front axle drive shaft, Central screws.

expand_moreWith ribbing
See figure 1.


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	90°90°90°

Figure 2. Wheel suspension, Front axle drive shaft, Central screws.

expand_moreWithout ribbing
See figure 2.


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Screws must be replaced.
Second stage	180°180°180°


Stabiliser mounting at the stabiliser	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Stabiliser mounting at suspension strut	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Nuts must be replaced.

expand_moreStabilizer mounting at the subframe


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreSupport joint at the stub axle


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreSupport joint at the transverse control arm


Aluminium forged transverse control arm	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Nuts must be replaced.
Cast-iron wishbone	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Nuts must be replaced.
From sheet metal	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Nuts must be replaced.

expand_moreTransverse control arm

expand_moreAt the subframe

expand_moreFront


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreBearing pedestal

expand_moreAt the subframe


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreOn chassis


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreLower front transverse control arm

expand_moreM12 × 110 screws


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreLower rear transverse control arm

expand_moreM10 × 70 screws


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreM12 × 100 screws


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreWheel hub wheel bearing

expand_moreOn stub axle

expand_moreWheel bearing unit


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreCentral screws

Figure 3. Wheel suspension, Wheel hub wheel bearing, Central screws.

expand_moreWith ribbing
See figure 3.


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	90°90°90°

Figure 4. Wheel suspension, Wheel hub wheel bearing, Central screws.

expand_moreWithout ribbing
See figure 4.


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreWheels and tires


Tire pressure sensors	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Wheel attachment	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Volkswagen Sharan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Chassis and Body Fastener Tightening Specifications
Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Sharan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Volkswagen Sharan you're not only saving money, but also also improving your technical skills and learning something new.

2013 Volkswagen Sharan Second generation Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Volkswagen Sharan Second generation model years

Suggest edit