2016 Volkswagen Sharan Second generation facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
AWD clutch oil control screws | 11.06 lbf⋅ft |
AWD clutch oil drain plug | 22.13 lbf⋅ft |
Use new seal and screws. |
M10 | 51.63 lbf⋅ft |
Screws must be replaced. |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 147.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
M10 | 51.63 lbf⋅ft |
Screws must be replaced. |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
M6 | 9.59 lbf⋅ft |
Tighten gradually cross-wise | |
M7 | 14.75 lbf⋅ft |
Tighten gradually cross-wise |
Clutch slave cylinder | 11.06 lbf⋅ft |
Screws must be replaced. |
Selector cable linkage | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2011.5–) | 11.06 lbf⋅ft |
02E transmission | 33.19 lbf⋅ft |
Hexagon head screws | 22.13 lbf⋅ft |
With Torx screws | 33.19 lbf⋅ft |
0A6 gearbox | 33.19 lbf⋅ft |
Overflow pipe | 2.21 lbf⋅ft |
Otherwise | 33.19 lbf⋅ft |
Hexagon head screws | 22.13 lbf⋅ft |
With Torx screws | 33.19 lbf⋅ft |
Gearbox oil filter cover | 14.75 lbf⋅ft |
Overflow pipe | 2.21 lbf⋅ft |
Otherwise | 33.19 lbf⋅ft |
Replace sealing rings |
Hexagon head screws | 22.13 lbf⋅ft |
Replace sealing rings | |
With Torx screws | 33.19 lbf⋅ft |
Seals must be replaced. |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Volkswagen Sharan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diesel Exhaust Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Sharan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Volkswagen Sharan you're not only saving money, but also also improving your technical skills and learning something new.