1987 Volkswagen Polo Sedan Second generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Intake manifold | 18.44 lbf⋅ft |
| 1.3 D with diesel straight-4 1.3 L 44 HP engine (1986.8–1988.12) | 51.63 lbf⋅ft |
| Coolant pump | 7.38 lbf⋅ft |
| First stage | 4.43 lbf⋅ft |
| Second stage | 90° |
| First stage | 4.43 lbf⋅ft |
| Second stage | 90° |
| First stage | 4.43 lbf⋅ft |
| Second stage | 90° |
| Screws | 7.38 lbf⋅ft |
| First stage | 29.5 lbf⋅ft |
| Screws must be replaced. See figure 1. | |
| Second stage | 44.25 lbf⋅ft |
| Third stage | 90° |
| Fourth stage | 90° |
| Valve cover | 7.38 lbf⋅ft |
| First stage | 22.13 lbf⋅ft |
| Second stage | 90° |
| First stage | 66.38 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 180° |
| M12 | 59 lbf⋅ft |
| First stage | 66.38 lbf⋅ft |
| Replace the screws and lubricate lightly | |
| Second stage | 120° |
| Crankshaft pulley | 14.75 lbf⋅ft |
| First stage | 44.25 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| Main bearing | 47.94 lbf⋅ft |
| First stage | 14.75 lbf⋅ft |
| Second stage | 59 lbf⋅ft |
| First stage | 66.38 lbf⋅ft |
| Screws must be replaced. Lightly oil the screws. | |
| Second stage | 120° |
| All Volkswagen diesel straight-4 1.3 Liters MN engines | 33.19 lbf⋅ft |
| All other modifications | 59 lbf⋅ft |
| Toothed belt guard | 7.38 lbf⋅ft |
| Oil drain plug | 22.13 lbf⋅ft |
| Oil filter housing | 18.44 lbf⋅ft |
| All Volkswagen diesel straight-4 1.3 Liters MN engines | 14.75 lbf⋅ft |
| All other modifications | 11.06 lbf⋅ft |
| 1.3 D with diesel straight-4 1.3 L 44 HP engine (1986.8–1988.12) | 18.44 lbf⋅ft |
| Lambda sensor | 36.88 lbf⋅ft |
| Exhaust manifold | 18.44 lbf⋅ft |
| Spark plugs | 18.44 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1987 Volkswagen Polo Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Polo Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1987 Volkswagen Polo Sedan you're not only saving money, but also also improving your technical skills and learning something new.