2013 Volkswagen Polo Hatchback Fifth generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
2.0 R WRC with gasoline straight-4 2.0 L 217 HP at 4500 RPM, 350 N⋅m at 2500 RPM engine (2013.8–) | 5.16 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-3 1.2 Liters CFWA engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CLNA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All other modifications | 14.75 lbf⋅ft |
On intake manifold | 7.38 lbf⋅ft |
On the engine block | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
All other modifications | 29.5 lbf⋅ft |
Compressor belt | 16.96 lbf⋅ft |
Top | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
All Volkswagen diesel straight-3 1.2 Liters CFWA engines | 33.19 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 36.88 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Sealing rings must be replaced. |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 36.88 lbf⋅ft |
All other modifications | 16.96–18.44 lbf⋅ft |
All other modifications | 59 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 29.5 lbf⋅ft |
Tighten crosswise from inside to outside. | |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 36.88 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
Hydraulic lines at the servo-steering pump | 22.13 lbf⋅ft |
Sealing rings must be replaced. | |
Power steering pump bracket | 5.16 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Vacuum pump | 7.38 lbf⋅ft |
Exhaust gas return valve | 7.38 lbf⋅ft |
Clamps | 5.9 lbf⋅ft |
Screws | 16.96 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYA engines | 16.23 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYB engines | 16.23 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 5.16 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All Volkswagen diesel straight-4 1.6 Liters CLNA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 5.16 lbf⋅ft |
All other modifications | 6.64–7.38 lbf⋅ft |
Tighten in several steps. |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 19.91 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Screws must be replaced. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | Screw in screw(s) by hand. |
Screws must be replaced. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | Screw in screw(s) by hand. |
Tighten bolts uniformly in several passes. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
Central nuts | 70.07 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Screws must be replaced. |
Injection hoses | 20.65 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Pressure tube connection | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
High-pressure pump | 14.75 lbf⋅ft |
Pressure tube connection | 29.5 lbf⋅ft |
Components must be replaced. |
M6 × 25 screws | 7.38 lbf⋅ft |
M8 × 20 screws | 18.44 lbf⋅ft |
All other modifications | 5.16–6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 10.33 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.2 Liters CJZB engines | 10.33 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 10.33 lbf⋅ft |
Nuts must be replaced. | |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 22.13 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 25.81 lbf⋅ft |
All other modifications | 5.9–6.64 lbf⋅ft |
Sealing rings must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 25.81 lbf⋅ft |
Sealing rings must be replaced. | |
All other modifications | 5.9–6.64 lbf⋅ft |
Sealing rings must be replaced. |
At the turbocharger | 22.13 lbf⋅ft |
Parts must be replaced. | |
On the engine block | 14.75 lbf⋅ft |
Parts must be replaced. |
All other modifications | 6.64 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVE engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYA engines | 11.06 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYB engines | 11.06 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-3 1.2 Liters CFWA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters CGPA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters CGPB engines | 18.44 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CLNA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 7.38 lbf⋅ft |
First stage | Screw in new screw(s) hand-tight. |
Second stage | 7.38 lbf⋅ft |
Third stage | Slacken screw(s) by 1 turn |
Fourth stage | 7.38 lbf⋅ft |
Screws 1, 2, and 5. Pretension coolant pump with 30 Nm using a torque wrench and keep up pretension. | |
Fifth stage | 8.85 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHE engines | 5.9 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVE engines | 17.7 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHE engines | 17.7 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Coolant thermostat housing | 5.16–6.64 lbf⋅ft |
Tighten the screws crosswise. |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 5.9 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Radiator mounting | 3.69 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | Tighten by hand |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 5.9 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
See figure 2. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
See figure 2. | |
Second stage | 180° |
First stage | Tighten bolt(s) until hand-tight. |
See figure 3. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
All Volkswagen diesel straight-3 1.2 Liters CFWA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 7.38 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Second stage | 180° |
First stage | 25.81 lbf⋅ft |
Screws must be replaced. See figure 4. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 4. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 6. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 6. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 6. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 6. | |
Second stage | 90° |
Third stage | 90° |
Cylinder head screws shank length (new) | 5.43 in |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Tighten from inside to outside. |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | 2.95 lbf⋅ft |
Repair work on components of the restraint system is not allowed, new parts must always be used. | |
Second stage | 45° |
First stage | 33.19 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Oil lightly |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. Lightly lubricate the screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 3.69 lbf⋅ft |
All other modifications | 6.64–7.38 lbf⋅ft |
Tighten new screws crosswise in outside-to-inside order. |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. Lightly oil the screws. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
Sealing rings must be replaced. |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
1.2 TSI with gasoline straight-4 1.2 L 103 HP at 5000 RPM, 175 N⋅m at 1550 RPM engine (2009.11–) | 29.5 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | Component must not be knocked down. |
First stage | 110.63 lbf⋅ft |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bearing screws | 14.75 lbf⋅ft |
Bearing screws | 14.75 lbf⋅ft |
Screws must be replaced. |
First stage | 3.69 lbf⋅ft |
Screws must be replaced. M6 x 20 | |
Second stage | 30° |
First stage | 3.69 lbf⋅ft |
Screws must be replaced. M6 x 20 | |
Second stage | 30° |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 36.88 lbf⋅ft |
Top | 16.96 lbf⋅ft |
Screws must be replaced. | |
Bottom | 24.34 lbf⋅ft |
Screws must be replaced. |
Top | 11.06 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 36.88 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Screws must be replaced. |
Camshaft timing chain guide rail | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 14.75 lbf⋅ft |
Bearing screws | 7.38 lbf⋅ft |
Screws | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 14.75 lbf⋅ft |
All other modifications | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 44.25 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 44.25 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 13.28 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Chain tensioner | 6.64 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bearing screws | 14.75 lbf⋅ft |
Control drive timing chain slip rail | 14.75 lbf⋅ft |
2.0 R WRC with gasoline straight-4 2.0 L 217 HP at 4500 RPM, 350 N⋅m at 2500 RPM engine (2013.8–) | 2.95 lbf⋅ft |
Coupling drive tensioning roller | 14.75 lbf⋅ft |
Drive chain balance shaft tensioner | 62.69 lbf⋅ft |
Use screw-locking compound. |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 135° |
Cap | 14.75 lbf⋅ft |
Seals must be replaced. |
All other modifications | 11.06 lbf⋅ft |
Do not dismantle |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 135° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Use sealant. | |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 8.11 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Use screw-locking compound. |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 8.85 lbf⋅ft |
Screws must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 8.85 lbf⋅ft |
Screws must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 8.85 lbf⋅ft |
Screws must be replaced. | |
All other modifications | 5.9 lbf⋅ft |
Use screw-locking compound. |
All other modifications | 5.9 lbf⋅ft |
Use screw-locking compound. |
First stage | 5.16 lbf⋅ft |
Screws must be replaced. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
First stage | 5.16 lbf⋅ft |
Screws must be replaced. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
All other modifications | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 45° |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Screws must be replaced. |
First stage | 3.69 lbf⋅ft |
Gradually tighten screws crosswise. | |
Second stage | 5.9 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
All other modifications | 8.11 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Sealing rings must be replaced. | |
Oil filter | 14.75–18.44 lbf⋅ft |
Slightly oil sealing lips. |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 11.06 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 16.23 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Sealing rings must be replaced. |
First stage | 10.33 lbf⋅ft |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 8.85 lbf⋅ft |
Screws must be replaced. |
First stage | Screw in screw(s) by hand |
Screws 1 - 11 See figure 8. | |
Second stage | 11.06 lbf⋅ft |
Screws 1 - 7 | |
Third stage | 11.06 lbf⋅ft |
Screws 8 and 11 |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 8.85 lbf⋅ft |
Screws must be replaced. | |
All Volkswagen gasoline straight-3 1.2 Liters CGPA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters CGPB engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 8.85 lbf⋅ft |
Screws must be replaced. | |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 7.38 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Sealing rings must be replaced. |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
Bolts must be replaced. |
First stage | Screw in new screw(s) hand-tight. |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 3.69 lbf⋅ft |
On the engine block. Tighten new screws crosswise in outside-to-inside order. | |
Second stage | 29.5 lbf⋅ft |
At the gearbox | |
Third stage | 11.06 lbf⋅ft |
On the engine block. |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
Tighten gradually cross-wise |
All Volkswagen gasoline straight-3 1.2 Liters CGPA engines | 6.64 lbf⋅ft |
Tighten gradually cross-wise | |
All Volkswagen gasoline straight-3 1.2 Liters CGPB engines | 6.64 lbf⋅ft |
Tighten gradually cross-wise |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | Screw in new screw(s) hand-tight. |
See figure 9. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Screw in new screw(s) hand-tight. |
Second stage | 8.85 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CJZB engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters CGPA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters CGPB engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 3.69 lbf⋅ft |
All other modifications | 2.21 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline straight-3 1.2 Liters CGPA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters CGPB engines | 5.9 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Exhaust gas temperature sensor | 33.19 lbf⋅ft |
Use hot screw paste |
All Volkswagen diesel straight-3 1.2 Liters CFWA engines | 11.06 lbf⋅ft |
All other modifications | 13.28 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Screws must be replaced. |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 33.19–36.88 lbf⋅ft |
Use hot screw paste | |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 40.57 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 40.57 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
Use assembly paste |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 29.5 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All other modifications | 36.88 lbf⋅ft |
Central nuts | do not dismantle |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CAVE engines | 16.96 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 16.96 lbf⋅ft |
Replace nuts. | |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CJZB engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CDLJ engines | 29.5 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 29.5 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 29.5 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 11.06 lbf⋅ft |
On catalytic converter | 16.96 lbf⋅ft |
On chassis | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 11.06 lbf⋅ft |
Clamps | 5.9 lbf⋅ft |
Differential pressure sensor lines | 33.19 lbf⋅ft |
Use hot screw paste |
All Volkswagen diesel straight-4 1.6 Liters CAYA engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 13.28 lbf⋅ft |
Tighten new nuts evenly in several steps. |
Top | 15.49 lbf⋅ft |
Nuts must be replaced. | |
Bottom | 22.13 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
All Volkswagen diesel straight-4 1.6 Liters CLNA engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 18.44 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CDDA engines | 29.5 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters CGGB engines | 29.5 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters CLPA engines | 29.5 lbf⋅ft |
Nuts must be replaced. |
Nuts | 29.5 lbf⋅ft |
Replace the nuts and use fitting paste | |
Screws | 14.75 lbf⋅ft |
Nuts | 14.75 lbf⋅ft |
Screws | 11.06 lbf⋅ft |
All other modifications | 16.96–18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CFNA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters CLSA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All other modifications | 16.96–18.44 lbf⋅ft |
Particle filter bracket | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CLNA engines | 14.75 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVE engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZC engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CJZB engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CPTA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHE engines | 18.44 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Volkswagen Polo Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Polo Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Volkswagen Polo Hatchback you're not only saving money, but also also improving your technical skills and learning something new.
2013 Volkswagen Polo Hatchback generations
In 2013 Volkswagen offered 2 generations of the Polo Hatchback. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.
Volkswagen Polo Hatchback Fifth generation model years
logo_volkswagen 2009logo_volkswagen 2010logo_volkswagen 2011logo_volkswagen 2012-
logo_volkswagen 2013 logo_volkswagen 2014