in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
expand_moreDrive shaft heat protection plate
M8 18.44 lbf⋅ft
M10 29.5 lbf⋅ft
expand_moreFront axle drive shaft
expand_moreAt the gearbox
First stage 7.38 lbf⋅ft
Tighten screws crosswise.
expand_moreSecond stage
M8 29.5 lbf⋅ft
M10 56.79 lbf⋅ft
expand_moreCentral screws
expand_moreM14
First stage 84.82 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreM16
First stage 140.14 lbf⋅ft
Screws must be replaced.
Second stage 180°
Propeller shaft heat protection plate 18.44 lbf⋅ft
expand_morePropeller shaft intermediate bearing
Nuts 18.44 lbf⋅ft
Stud screws 7.38 lbf⋅ft
Propeller shaft 40.57 lbf⋅ft
Screws must be replaced.
expand_moreRear axle drive shaft
expand_moreAt the gearbox
M8 29.5 lbf⋅ft
Gradually tighten screws crosswise.
M10 56.79 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreCentral screws
expand_moreM14
First stage 84.82 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreM16
First stage 140.14 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreOn rear axle
M8 29.5 lbf⋅ft
expand_moreClutch
Clutch master cylinder 14.75 lbf⋅ft
Clutch pressure plate 18.44 lbf⋅ft
Tighten pressure plate bolt(s) gradually crosswise.
expand_moreClutch slave cylinder
expand_more1.9 TDI Syncro/4motion with diesel straight-4 1.9 L 109 HP, 235 N⋅m engine (1997.6–2000.11)
01A gearbox 14.75 lbf⋅ft
Screws must be replaced.
01E gearbox 18.44 lbf⋅ft
Screws must be replaced.
expand_more1.9 TDI with diesel straight-4 1.9 L 114 HP at 4000 RPM, 285 N⋅m at 1900 RPM engine (1998.8–2000.11)
expand_moreWith manual transmission
Aluminium 25.81 lbf⋅ft
Screws must be replaced.
Magnesium 18.44 lbf⋅ft
Screws must be replaced.
2.3 VR5 Syncro/4motion with gasoline vr-5 2.3 L 148 HP at 6000 RPM, 205 N⋅m at 3200 RPM engine (1997.10–2000.11) 18.44 lbf⋅ft
Screws must be replaced.
2.3 VR5 with gasoline vr-5 2.3 L 148 HP at 6000 RPM, 205 N⋅m at 3200 RPM engine (1997.6–2000.11) 18.44 lbf⋅ft
Screws must be replaced.
2.5 TDI Syncro/4motion with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.12–2000.11) 18.44 lbf⋅ft
2.5 TDI Syncro/4motion with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.12–2000.11) 18.44 lbf⋅ft
2.5 TDI with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.7–2000.11) 18.44 lbf⋅ft
2.5 TDI with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.7–2000.11) 18.44 lbf⋅ft
All other modifications 14.75 lbf⋅ft
Screws must be replaced.
expand_moreRelease bearing guide sleeve
2.5 TDI Syncro/4motion with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.12–2000.11) 11.06 lbf⋅ft
2.5 TDI Syncro/4motion with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.12–2000.11) 11.06 lbf⋅ft
2.5 TDI with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.7–2000.11) 11.06 lbf⋅ft
2.5 TDI with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.7–2000.11) 11.06 lbf⋅ft
expand_moreAll other modifications
Aluminium 25.81 lbf⋅ft
Screws must be replaced.
Magnesium 18.44 lbf⋅ft
Screws must be replaced.
expand_moreDifferential
expand_moreDifferential oil control screws
expand_more1.8 with gasoline straight-4 1.8 L 114 HP engine (1997.6–2000.11)
With automatic gearbox 18.44 lbf⋅ft
expand_moreAll other modifications
expand_moreWith automatic gearbox
01V gearbox 22.13 lbf⋅ft
Use new seal and screws.
expand_moreRear axle differential bracket
At the axle support 29.5 lbf⋅ft
expand_moreAt the differential
M10 × 25 screws 29.5 lbf⋅ft
M10 × 45 screws 40.57 lbf⋅ft
Rear axle differential oil control screws 25.81 lbf⋅ft
expand_moreGear shifting
expand_moreGear rod
Hexagon head screws 16.96 lbf⋅ft
Screws must be replaced.
Hexagon socket screws 18.44 lbf⋅ft
expand_moreThrust rod
At the gearbox 29.5 lbf⋅ft
Rear 18.44 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
expand_more1.8 Syncro/4motion with gasoline straight-4 1.8 L 123 HP, 168 N⋅m engine (1997.6–2000.11)
M12 47.94 lbf⋅ft
M14 33.19 lbf⋅ft
expand_more2.3 VR5 Syncro/4motion with gasoline vr-5 2.3 L 148 HP at 6000 RPM, 205 N⋅m at 3200 RPM engine (1997.10–2000.11)
M10 33.19 lbf⋅ft
M10 × 135 screws 47.94 lbf⋅ft
M12 47.94 lbf⋅ft
expand_more2.5 TDI Syncro/4motion with diesel V6 2.5 L 148 HP at 4000 RPM, 310 N⋅m at 1500 RPM engine (1998.12–2000.11)
M10 33.19 lbf⋅ft
M10 × 135 screws 47.94 lbf⋅ft
M12 47.94 lbf⋅ft
expand_more2.8 Syncro with gasoline V6 2.8 L 177 HP engine (1997.5–1999.9)
M10 33.19 lbf⋅ft
M10 × 135 screws 47.94 lbf⋅ft
M12 47.94 lbf⋅ft
expand_more2.8 V6 Syncro/4motion with gasoline V6 2.8 L 190 HP, 280 N⋅m engine (1997.6–2000.11)
M10 33.19 lbf⋅ft
M10 × 135 screws 47.94 lbf⋅ft
M12 47.94 lbf⋅ft
expand_moreAll other modifications
M10 33.19 lbf⋅ft
M12 47.94 lbf⋅ft
Torque converter 62.69 lbf⋅ft
expand_moreGearbox lubrication
expand_moreDistributor gearbox oil control screws
01V gearbox 25.81 lbf⋅ft
Screws must be replaced.
expand_moreDistributor gearbox oil drain plug
01V gearbox 14.75 lbf⋅ft
Screws must be replaced.
expand_moreGearbox oil drain plug
expand_moreWith manual transmission
012 gearbox 14.75 lbf⋅ft
01A gearbox 18.44 lbf⋅ft
Otherwise 22.13 lbf⋅ft
expand_moreWith automatic gearbox
01V gearbox 29.5 lbf⋅ft
Use new seal and screws.
expand_moreOtherwise
Overflow pipe 1.48 lbf⋅ft
Locking screws 11.06 lbf⋅ft
expand_moreGearbox oil filler plug
012 gearbox 18.44 lbf⋅ft
01A gearbox 18.44 lbf⋅ft
01V gearbox 59 lbf⋅ft
Sealing rings must be replaced.
01W gearbox 18.44 lbf⋅ft
01E gearbox 29.5 lbf⋅ft
expand_moreOil control plug
expand_more01N gearbox
Overflow pipe 1.48 lbf⋅ft
Otherwise 11.06 lbf⋅ft
Seals must be replaced.
expand_moreOil filler screws
With manual transmission 18.44 lbf⋅ft
expand_moreGearbox mounting
expand_moreGearbox mounting
Screws at the gearbox bracket 36.88 lbf⋅ft
At the subframe 16.96 lbf⋅ft
Use new screws with the screw- locking compound.
expand_moreAll Volkswagen diesel V6 2.5 Liters AFB engines
Screws at the gearbox bracket 36.88 lbf⋅ft
At the subframe 18.44 lbf⋅ft
Screws at the gearbox bracket 36.88 lbf⋅ft
At the subframe 16.96 lbf⋅ft
Use new screws with the screw- locking compound.
expand_moreAll other modifications
Nuts at the gearbox bracket (M10) 33.19 lbf⋅ft
Screws at the subframe (M8) 14.75 lbf⋅ft
expand_moreGearbox support
M10 29.5 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1998 Volkswagen Passat Variant Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Passat Variant Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1998 Volkswagen Passat Variant Wagon you're not only saving money, but also also improving your technical skills and learning something new.

1998 Volkswagen Passat Variant Wagon generations

In 1998 Volkswagen offered 2 generations of the Passat Variant Wagon. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Volkswagen Passat Variant Wagon B5 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat