2006 Volkswagen Passat Sedan B5.5 facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All other modifications | 7.38 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Air-conditioning compressor pressure line | 18.44 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Hydraulic lines at the servo-steering pump | 22.13 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Wheel | 16.23 lbf⋅ft |
Fuel-distributing pipe | 7.38 lbf⋅ft |
Injection hoses | 22.13 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Injection pump | 14.75 lbf⋅ft |
Central nuts | Do not loosen the middle nut. |
Screws | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. |
All other modifications | 18.44 lbf⋅ft |
Turbocharger coolant feed line | 25.81 lbf⋅ft |
Sealing rings must be replaced. | |
Turbocharger coolant return line | 22.13 lbf⋅ft |
At the oil filter | 7.38 lbf⋅ft |
Sealing rings must be replaced. | |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. |
All other modifications | 7.38 lbf⋅ft |
Sealing rings must be replaced. |
All other modifications | 11.06 lbf⋅ft |
Fan wheel | 7.38 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Nuts | 11.06 lbf⋅ft |
Screws | 7.38 lbf⋅ft |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 1. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Valve cover | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Valve play adjusting screw lock nuts | 22.13 lbf⋅ft |
Toothed wheel | 18.44 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All other modifications | 16.23 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 16.23 lbf⋅ft |
Balance shaft toothed belt tension pulley | 18.44 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All other modifications | 55.32 lbf⋅ft |
Control drive chain tensioner | 5.9 lbf⋅ft |
Screws must be replaced. | |
Control drive timing chain slip rail | 7.38 lbf⋅ft |
Tensioning lever | 30.98 lbf⋅ft |
Injection pump drive belt tensioning roller | 25.81 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 11.06 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
See figure 2. | |
M8 | 14.75 lbf⋅ft |
Timing case cover | 7.38 lbf⋅ft |
Toothed belt guard | 7.38 lbf⋅ft |
The top of the toothed belt guard | 12.54 lbf⋅ft |
All other modifications | 30.98 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
At the gearbox | 33.19 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
Ceramic glow plug | 8.85 lbf⋅ft |
Metal glow plug | 11.06 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
At the subframe | 16.96 lbf⋅ft |
Nuts must be replaced. | |
On engine bracket | 16.96 lbf⋅ft |
Nuts must be replaced. |
All other modifications | 29.5 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Sealing rings must be replaced. |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
Front | 18.44 lbf⋅ft |
Nuts must be replaced. | |
Rear | 29.5 lbf⋅ft |
Exhaust pipe bracket | 18.44 lbf⋅ft |
Primary catalytic converter | 18.44 lbf⋅ft |
Nuts must be replaced. |
Fuel lines | 16.23 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Starter | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Volkswagen Passat Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Regeneration Fluid Capacity
- Steering Fluid Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Passat Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Volkswagen Passat Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2006 Volkswagen Passat Sedan generations
In 2006 Volkswagen offered 3 generations of the Passat Sedan. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.