2010 Volkswagen New Beetle Sedan First generation facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
AWD clutch oil control screws | 22.13 lbf⋅ft |
Sealing rings must be replaced. | |
AWD clutch oil drain plug | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Drive shaft heat protection plate | 25.81 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 29.5 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 51.63 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 180° detach |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 60° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 29.5 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 51.63 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 180° detach |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 60° |
M10 | 51.63 lbf⋅ft |
Gradually tighten screws crosswise. | |
M8 | 29.5 lbf⋅ft |
Gradually tighten screws crosswise. |
Propeller shaft heat protection plate | 25.81 lbf⋅ft |
M10 | 51.63 lbf⋅ft |
M8 | 29.5 lbf⋅ft |
M10 | 51.63 lbf⋅ft |
M8 | 29.5 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Second stage | 51.63 lbf⋅ft |
Clutch master cylinder | 18.44 lbf⋅ft |
Nuts must be replaced. |
M6 | 9.59 lbf⋅ft |
Gradually tighten screws crosswise. | |
M7 | 14.75 lbf⋅ft |
Gradually tighten screws crosswise. |
Otherwise | 14.75 lbf⋅ft |
Gradually tighten screws crosswise. |
All Volkswagen gasoline straight-4 1.4 Liters BCA engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
Differential oil control screws | 18.44 lbf⋅ft |
Differential oil drain plug | 18.44 lbf⋅ft |
Gear rod guide lever | 11.06 lbf⋅ft |
Gearbox shift lever | 14.75 lbf⋅ft |
Nuts must be replaced. |
02J gearbox | 18.44 lbf⋅ft |
0A4 gearbox | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 59 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 59 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
Torque converter | 44.25 lbf⋅ft |
02J gearbox | 22.13 lbf⋅ft |
01M gearbox | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
09G gearbox | 29.5 lbf⋅ft |
Sealing rings must be replaced. |
Hexagon head screws | 22.13 lbf⋅ft |
With Torx screws | 33.19 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
02E transmission | 33.19 lbf⋅ft |
09G gearbox | 19.91 lbf⋅ft |
Sealing rings must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters AEG engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters APK engines | 14.75 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters AQY engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters AVH engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters AZG engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters AZJ engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BEJ engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BER engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BEV engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BHP engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBPA engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
With manual transmission | 73.76 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Volkswagen New Beetle Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen New Beetle Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Volkswagen New Beetle Sedan you're not only saving money, but also also improving your technical skills and learning something new.