2009 Volkswagen Fox (Brazil) First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 33.19 lbf⋅ft |
Volkswagen gasoline straight-4 1.4 Liters BKR 74 HP at 5000 RPM, 124 N⋅m at 2750 RPM | 33.19 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
Alternator | 16.96–18.44 lbf⋅ft |
With freewheel | 62.69 lbf⋅ft |
Without freewheel | 55.32 lbf⋅ft |
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 33.19 lbf⋅ft |
Volkswagen gasoline straight-4 1.4 Liters BKR 74 HP at 5000 RPM, 124 N⋅m at 2750 RPM | 33.19 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
Hydraulic lines at the servo-steering pump | 22.13 lbf⋅ft |
Servo steering pump | 5.16 lbf⋅ft |
Fuel-distributing pipe | 7.38 lbf⋅ft |
First stage | 8.85 lbf⋅ft |
Screws must be replaced. | |
Second stage | 270° |
Volkswagen gasoline straight-3 1.2 Liters CHFB 54 HP at 4750 RPM, 106 N⋅m at 3000 RPM | 18.44 lbf⋅ft |
Volkswagen gasoline straight-3 1.2 Liters BMD 54 HP at 4750 RPM, 108 N⋅m at 3000 RPM | 18.44 lbf⋅ft |
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 11.06 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Coolant pump pulley | 14.75 lbf⋅ft |
Fan wheel | 7.38 lbf⋅ft |
Radiator mounting | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
See figure 1. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 2. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 180° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
Cylinder head screws shank length (new) | 6.22 in |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Valve play adjusting screw lock nuts | 22.13 lbf⋅ft |
First stage | 73.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Volkswagen gasoline straight-3 1.2 Liters CHFB 54 HP at 4750 RPM, 106 N⋅m at 3000 RPM | Component must not be knocked down. |
Volkswagen gasoline straight-3 1.2 Liters BMD 54 HP at 4750 RPM, 108 N⋅m at 3000 RPM | Component must not be knocked down. |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Second stage | 90° |
Wheel | 14.75 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Volkswagen gasoline straight-3 1.2 Liters CHFB 54 HP at 4750 RPM, 106 N⋅m at 3000 RPM | Component must not be knocked down. |
Volkswagen gasoline straight-3 1.2 Liters BMD 54 HP at 4750 RPM, 108 N⋅m at 3000 RPM | Component must not be knocked down. |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 47.94 lbf⋅ft |
Screws must be replaced. |
All Volkswagen gasoline straight-4 1.4 Liters BKR engines | 14.75 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
Camshaft drive belt deflection pulley | 14.75 lbf⋅ft |
Camshaft timing chain slip rail | 14.75 lbf⋅ft |
Camshaft timing chain tensioner | 11.06 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Intermediate shaft chain sprocket | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-3 1.2 Liters BMD engines | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-3 1.2 Liters CHFB engines | 11.06 lbf⋅ft |
Tension rail bearing screws | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
Toothed belt guard at the bottom | 7.38 lbf⋅ft |
Toothed belt guard center | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 45° |
All other modifications | 14.75 lbf⋅ft |
Use new screws and nuts. |
Heat-exchanger on oil filter housing | 18.44 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Screws must be replaced. |
First stage | Tighten by hand |
Slightly oil sealing lips. | |
Second stage | 14.75–17.7 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Oil pressure sensor | 18.44 lbf⋅ft |
Volkswagen gasoline straight-3 1.2 Liters CHFB 54 HP at 4750 RPM, 106 N⋅m at 3000 RPM | 18.44 lbf⋅ft |
Volkswagen gasoline straight-3 1.2 Liters BMD 54 HP at 4750 RPM, 108 N⋅m at 3000 RPM | 18.44 lbf⋅ft |
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 14.75 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
Third stage | 33.19 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
Glow plugs | 11.06 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BKR engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-3 1.4 Liters BNM engines | 33.19 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Volkswagen diesel straight-3 1.4 Liters BNM 68 HP at 4000 RPM, 155 N⋅m at 1600 RPM | 18.44 lbf⋅ft |
Nuts must be replaced. | |
All other modifications | 29.5 lbf⋅ft |
Nuts must be replaced. |
Exhaust manifold | 18.44 lbf⋅ft |
Nuts must be replaced. | |
Exhaust manifold heat shields | 7.38 lbf⋅ft |
Exhaust pipe | 29.5 lbf⋅ft |
Exhaust pipe bracket | 18.44 lbf⋅ft |
Spark plugs | 22.13 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Second stage | 45° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 Volkswagen Fox (Brazil) user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Fox (Brazil) service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2009 Volkswagen Fox (Brazil) you're not only saving money, but also also improving your technical skills and learning something new.
2009 Volkswagen Fox (Brazil) generations
In 2009 Volkswagen offered 2 generations of the Fox (Brazil). Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.