in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
expand_moreFront axle drive shaft
expand_moreCentral screws
First stage 110.63 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreOther
First stage 36.88 lbf⋅ft
Tighten the new screws evenly in several steps.
Second stage 90°
Propeller shaft intermediate bearing 18.44 lbf⋅ft
expand_morePropeller shaft
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreRear axle drive shaft
expand_more2.0 TDI with diesel straight-4 2.0 L 121 HP, 340 N⋅m at 1600 RPM engine (2010.9–)
expand_moreCentral screws
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreOther
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
expand_moreCentral screws
First stage 110.63 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreClutch
Clutch master cylinder 6.64 lbf⋅ft
expand_moreClutch pressure plate
M6 screws 9.59 lbf⋅ft
M7 screws 14.75 lbf⋅ft
All other modifications 14.75 lbf⋅ft
expand_moreClutch slave cylinder
With concentric slave cylinder 7.38 lbf⋅ft
Replace screws.
expand_moreDifferential
Differential cover 31.72 lbf⋅ft
Differential oil control screws 25.81 lbf⋅ft
Oil filler screws.
Differential oil drain plug 23.6 lbf⋅ft
Rear axle differential oil control screws 24.34 lbf⋅ft
Oil filler screws.
expand_moreGearbox
expand_moreGearbox flange connection at engine
M10 33.19 lbf⋅ft
M12 59 lbf⋅ft
Torque converter 62.69 lbf⋅ft
expand_moreGearbox lubrication
Distributor gearbox oil control screws 19.91 lbf⋅ft
Replace screws.
Distributor gearbox oil drain plug 19.91 lbf⋅ft
Replace screws.
Distributor gearbox oil filler screws 19.91 lbf⋅ft
Replace screws.
expand_moreGearbox oil drain plug
6-speed 0C6 transmission 25.81 lbf⋅ft
0CM gearbox 8.85 lbf⋅ft
expand_moreGearbox oil filler plug
6-speed 0C6 transmission 25.81 lbf⋅ft
0CM gearbox 25.81 lbf⋅ft
Use new screw.
expand_moreGearbox oil sump
0CM gearbox 8.85 lbf⋅ft
Tighten the new screws evenly in several steps.
expand_moreGearbox mounting
expand_moreGearbox mounting
First stage 36.88 lbf⋅ft
Replace bolts.
Second stage 90°
expand_moreGearbox support
expand_moreScrews at the gearbox bracket
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAt the gearbox
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOn chassis
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTransfer case
Transfer box onto transmission flange connection 33.19 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2025 Volkswagen Amarok user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Amarok service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2025 Volkswagen Amarok you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat