2014 Vauxhall Vivaro Chassis Second generation (MK2) Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Intake manifold | 7.38 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
Air-conditioning compressor pressure line | 5.9 lbf⋅ft |
Alternator | 18.44 lbf⋅ft |
Generator bracket | 45.73 lbf⋅ft |
Hydraulic lines at the servo-steering pump | 8.85 lbf⋅ft |
Servo steering pump | 5.9 lbf⋅ft |
Vacuum pump | 18.44 lbf⋅ft |
Exhaust gas return cooler | 18.44 lbf⋅ft |
Exhaust gas return valve | 18.44 lbf⋅ft |
Exhaust recirculation pipe | 18.44 lbf⋅ft |
Fuel-distributing pipe | 18.44 lbf⋅ft |
High-pressure line | 17.7–20.65 lbf⋅ft |
High-pressure pump | 18.44 lbf⋅ft |
Replace screws. | |
High-pressure pump drive wheel | 66.38 lbf⋅ft |
Replace nuts. |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Charge air pipes | 7.38 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace nuts. | |
Second stage | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace nuts. | |
Second stage | 22.13 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace nuts. | |
Second stage | 18.44 lbf⋅ft |
All Vauxhall diesel straight-4 1.6 L R9M 408 engines | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Second stage | 18.44 lbf⋅ft |
At the turbocharger | 11.8 lbf⋅ft |
At the turbocharger | 7.38 lbf⋅ft |
Coolant pump | 7.38 lbf⋅ft |
Coolant pump pulley | 7.38 lbf⋅ft |
Camshaft bearing | 7.38 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 300° |
First stage | 3.69 lbf⋅ft |
See figure 1. | |
Second stage | 8.85 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Replace screws. | |
Second stage | 110° |
Crankcase ventilation | 7.38 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 150° |
Engine block closure screws | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 60–64° |
Control drive chain guide rail | 18.44 lbf⋅ft |
Replace screws. | |
Control drive chain tensioner | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 35° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 40° |
Timing case cover | 11.06 lbf⋅ft |
Use sealant. |
Oil cooler | 7.38 lbf⋅ft |
Oil drain plug | 36.88 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter housing | 7.38 lbf⋅ft |
Oil pressure sensor | 25.81 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
Oil sump | 8.85 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
Charge air pressure sensor | 2.95 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
All Vauxhall diesel straight-4 1.6 L R9M 408 engines | 33.19 lbf⋅ft |
All Vauxhall diesel straight-4 1.6 L R9M 450 engines | 23.6 lbf⋅ft |
Glow plugs | 10.33 lbf⋅ft |
Lambda sensor | 32.45 lbf⋅ft |
Right | 51.63 lbf⋅ft |
Left | 45.73 lbf⋅ft |
Rear | 77.44 lbf⋅ft |
Rear | 206.52 lbf⋅ft |
Right | 45.73 lbf⋅ft |
At the subframe | 88.51 lbf⋅ft |
On engine | 73.76 lbf⋅ft |
At the subframe | 206.52 lbf⋅ft |
Clamps | 13.28 lbf⋅ft |
Nuts | 15.49 lbf⋅ft |
Diesel particulate filter | 15.49 lbf⋅ft |
Replace screws. | |
Differential pressure sensor lines | 15.49 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace nuts. | |
Second stage | 22.13 lbf⋅ft |
Exhaust manifold heat shields | 18.44 lbf⋅ft |
Clamps | 13.28–18.44 lbf⋅ft |
Exhaust pipe bracket | 15.49 lbf⋅ft |
Exhaust pipe rear | 13.28 lbf⋅ft |
Particle filter bracket | 18.44 lbf⋅ft |
Particulate filter heat protection plate | 7.38 lbf⋅ft |
Fuel filter bracket | 4.43 lbf⋅ft |
Fuel filter housing | 5.9 lbf⋅ft |
Starter | 32.45 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Vauxhall Vivaro Chassis user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Vivaro Chassis service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Vauxhall Vivaro Chassis you're not only saving money, but also also improving your technical skills and learning something new.
2014 Vauxhall Vivaro Chassis generations
In 2014 Vauxhall offered 2 generations of the Vivaro Chassis. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.