2013 Vauxhall Vivaro Chassis First generation facelift (MK1) Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 7.38 lbf⋅ft |
| Brake hose | 10.33 lbf⋅ft |
| Brake line | 10.33 lbf⋅ft |
| Front axle brake caliper | 25.81 lbf⋅ft |
| Replace screws. | |
| Front axle brake caliper mounting support | 78.92 lbf⋅ft |
| Clean the thread and use screw-locking compound. | |
| Front axle brake disc | 15.49 lbf⋅ft |
| Lower steering column joint | 15.49 lbf⋅ft |
| Pressure line at steering gear | 15.49 lbf⋅ft |
| Replace sealing rings. | |
| Steering column | 15.49 lbf⋅ft |
| Use new screws. | |
| Steering gear | 132.76 lbf⋅ft |
| Use new screws and nuts. | |
| Steering wheel | 32.45 lbf⋅ft |
| Replace screws. | |
| Track rod end on stub axle | 27.29 lbf⋅ft |
| Vauxhall gasoline straight-4 2.0 L F4R 820 115 HP, 190 N⋅m at 3750 RPM | 39.09 lbf⋅ft |
| Vauxhall diesel straight-4 2.5 L G9U 630 143 HP | 39.09 lbf⋅ft |
| Vauxhall diesel straight-4 2.5 L G9U 730 143 HP | 39.09 lbf⋅ft |
| All other modifications | 36.88 lbf⋅ft |
| Shock-absorber piston rod | 44.25 lbf⋅ft |
| Replace nuts. | |
| On chassis | 45.73 lbf⋅ft |
| On stub axle | 132.76 lbf⋅ft |
| At the gearbox | 15.49 lbf⋅ft |
| Central nuts | 206.52 lbf⋅ft |
| Replace nuts. | |
| Front axle stabiliser mounting | 15.49 lbf⋅ft |
| Stabiliser mounting at the stabiliser | 32.45 lbf⋅ft |
| Replace nuts. | |
| Stabiliser mounting at suspension strut | 15.49 lbf⋅ft |
| Support joint at the stub axle | 84.82 lbf⋅ft |
| Replace nuts. | |
| Front | 44.25 lbf⋅ft |
| Rear | 73.76 lbf⋅ft |
| Use screw-locking compound. | |
| At the subframe | 132.76 lbf⋅ft |
| Align the transverse control arm horizontal to the subframe | |
| Central nuts | 206.52 lbf⋅ft |
| Replace nuts. | |
| Wheel attachment | 104.73 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Vauxhall Vivaro Chassis user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Vivaro Chassis service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Vauxhall Vivaro Chassis you're not only saving money, but also also improving your technical skills and learning something new.