in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreIntake manifold
All other modifications 16.23 lbf⋅ft
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt tensioner
All Vauxhall gasoline straight-4 1.2 L C 12 NZ engines 18.44 lbf⋅ft
Auxiliary drive belt tensioner 14.75 lbf⋅ft
expand_moreAlternator
M10 29.5 lbf⋅ft
M8 22.13 lbf⋅ft
expand_moreCooling system
Coolant pump 5.9 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
All other modifications 5.9 lbf⋅ft
Valve cover 5.9 lbf⋅ft
expand_moreEngine block
expand_moreConnecting rod bearing
Screw with thread length 15 mm 18.44 lbf⋅ft
Replace screws and nuts.
expand_moreScrew with thread length 40 mm
First stage 18.44 lbf⋅ft
Replace screws and nuts.
Second stage 30°
expand_moreAll other modifications
First stage 18.44 lbf⋅ft
Replace screws and nuts.
Second stage 30°
expand_moreCrankshaft central screws
expand_moreAll other modifications
Screw with thread length 23 mm 40.57 lbf⋅ft
expand_moreScrew with thread length 30 mm
First stage 40.57 lbf⋅ft
Use new screw.
Second stage 45°
Third stage 15°
expand_moreFlywheel
expand_moreAll other modifications
First stage 25.81 lbf⋅ft
Clean thread and use new screws.
Second stage 30°
Third stage 15°
Flywheel cover 5.16 lbf⋅ft
expand_moreMain bearing
First stage 36.88 lbf⋅ft
Replace screws and nuts.
Second stage 4560°
expand_moreAll other modifications
First stage 36.88 lbf⋅ft
Replace screws and nuts.
Second stage 45°
Third stage 15°
expand_moreEngine control
expand_moreCamshaft timing gear
All other modifications 33.19 lbf⋅ft
expand_moreToothed belt guard
All other modifications 2.95 lbf⋅ft
expand_moreToothed belt tensioning roller
All other modifications 14.75 lbf⋅ft
expand_moreToothed belt tightener
1.2 i CAT with gasoline straight-4 1.2 L 44 HP at 5000 RPM, 88 N⋅m at 2400 RPM engine (1989.9–1993.3) 14.75 lbf⋅ft
expand_moreEngine lubrication
expand_moreOil drain plug
Sheet-steel sump 40.57 lbf⋅ft
expand_moreAluminium oil sump
Torx screws 10.33 lbf⋅ft
With hexagon-head screws 33.19 lbf⋅ft
All other modifications 40.57 lbf⋅ft
Oil filter housing 11.06 lbf⋅ft
expand_moreOil sump
expand_moreAt the gearbox
M10 29.5 lbf⋅ft
M8 14.75 lbf⋅ft
On the engine block 7.38 lbf⋅ft
Clean the thread and use screw-locking compound.
expand_moreAll other modifications
expand_moreAt the gearbox
M10 29.5 lbf⋅ft
M8 14.75 lbf⋅ft
On the engine block 5.9 lbf⋅ft
expand_moreEngine management
Lambda sensor 22.13 lbf⋅ft
expand_moreExhaust system
expand_moreExhaust manifold
All other modifications 16.23 lbf⋅ft
Replace screws and nuts.
expand_moreIgnition system
expand_moreSpark plugs
All other modifications 18.44 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1989 Vauxhall Nova Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Nova Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1989 Vauxhall Nova Hatchback you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat