in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 12.54 lbf⋅ft |
| At the brake caliper | 29.5 lbf⋅ft |
| At the brake hose | 13.28 lbf⋅ft |
| Front axle brake caliper | 20.65 lbf⋅ft |
| Front axle brake caliper mounting support | 118.01 lbf⋅ft |
| Front axle brake disc | 6.64 lbf⋅ft |
| Wheel speed sensor | 5.9 lbf⋅ft |
| Pressure line at steering gear | 8.11 lbf⋅ft |
| Return line to steering gear | 8.11 lbf⋅ft |
| First stage | 73.76 lbf⋅ft |
| Second stage | 90–105° |
| Track rod end on track rod | 44.25 lbf⋅ft |
| Variant 1 | 59 lbf⋅ft |
| N40 | |
| Variant 2 | 51.63 lbf⋅ft |
| NJ1 | |
| Shock-absorber piston rod | 47.94 lbf⋅ft |
| On wheel hub | 81.13 lbf⋅ft |
| First stage | 36.88 lbf⋅ft |
| Replace nuts. | |
| Second stage | 60° |
| Stabiliser mounting at the stabiliser | 47.94 lbf⋅ft |
| Stabiliser mounting at suspension strut | 47.94 lbf⋅ft |
| Stabilizer mounting at the subframe | 16.23 lbf⋅ft |
| First stage | 27.29 lbf⋅ft |
| Second stage | 120° |
| Unscrew nuts. | |
| Third stage | 22.13 lbf⋅ft |
| Fourth stage | 30–45° |
| First stage | 84.82 lbf⋅ft |
| Second stage | 720° |
| Loosen screw | |
| Third stage | 51.63 lbf⋅ft |
| Fourth stage | 90–105° |
| First stage | 59 lbf⋅ft |
| Second stage | 60–75° |
| Torx screws | 11.51 lbf⋅in |
| Wheel attachment | 103.26 lbf⋅ft |
| Tighten the wheel nuts alternately | |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Vauxhall Mokka user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Mokka service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Vauxhall Mokka you're not only saving money, but also also improving your technical skills and learning something new.
2016 Vauxhall Mokka generations
In 2016 Vauxhall offered 2 generations of the Mokka. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.