expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
expand_moreInside (M8)
First stage
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screws.
Second stage
60°60°60°
Third stage
15°15°15°
expand_moreOutside (M6)
Fourth stage
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screws.
Fifth stage
60°60°60°
Sixth stage
15°15°15°
expand_moreEngine control
expand_moreCamshaft timing chain guide rail
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreCamshaft timing chain slip rail
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreCamshaft timing chain tensioning rail
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
expand_moreCamshaft timing gear
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
First stage
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage
60°60°60°
expand_moreChain tensioner
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreTiming case cover
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
M10
25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
M6
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreEngine lubrication
expand_moreOil drain plug
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreOil filter housing
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
Oil filter cover
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
expand_moreOil sump
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
At the gearbox
29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
On the engine block
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreEngine management
expand_moreCamshaft sensor
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
expand_moreCrankshaft sensor
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreExhaust gas temperature sensor
1.3 CDTI with diesel straight-4 1.2 L 89 HP engine (2006.7–)
33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
expand_moreKnock sensor
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
expand_moreLambda sensor
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
expand_moreEngine mounting
expand_moreEngine bracket
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
expand_moreEngine mounting
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
On chassis
44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
expand_moreOn engine bracket
First stage
59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage
45°45°45°
expand_moreSubframe
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage
45°45°45°
Otherwise
15°15°15°
expand_moreTorque arm
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
First stage
59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage
45°45°45°
expand_moreTorque support bracket
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
First stage
59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage
45°45°45°
expand_moreExhaust system
expand_moreCatalytic converter
expand_more1.3 CDTI with diesel straight-4 1.2 L 89 HP engine (2006.7–)
At the turbocharger
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use hot screw paste
expand_moreCatalytic converter bracket
1.3 CDTI with diesel straight-4 1.2 L 89 HP engine (2006.7–)
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
expand_moreDifferential pressure sensor lines
1.3 CDTI with diesel straight-4 1.2 L 89 HP engine (2006.7–)
33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
expand_moreExhaust manifold
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Tighten in several steps.
expand_moreExhaust manifold heat shields
expand_more1.3 CDTI with diesel straight-4 1.2 L 89 HP engine (2006.7–)
M6
6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Engine suspension eye
expand_moreExhaust pipe
expand_more1.3 CDTI with diesel straight-4 1.2 L 89 HP engine (2006.7–)
On particle filter
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
expand_moreIgnition system
expand_moreSpark plugs
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
expand_moreStart system
expand_moreStarter
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Vauxhall Corsa Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Corsa Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Vauxhall Corsa Van you're not only saving money, but also also improving your technical skills and learning something new.
2014 Vauxhall Corsa Van generations
In 2014 Vauxhall offered 2 generations of the Corsa Van. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.
