expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
With disc brake
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
With drum brake
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreRear axle brake caliper
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
On brake anchor plate
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreRear axle brake caliper mounting support
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Clean the thread and use screw-locking compound.
expand_moreRear axle brake disc
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
expand_moreRear axle brake hose
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Replace sealing rings.
expand_moreRear axle wheel brake cylinder
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
expand_moreRear axle wheel speed sensor
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
expand_moreRear axle suspension
expand_moreRear axle shock absorber
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
expand_moreOn chassis
expand_moreTop
First stage
40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace screws.
Second stage
60°60°60°
Third stage
15°15°15°
expand_moreOn rear axle
Bottom
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
expand_moreRear axle wheel suspension
expand_moreRear axle carrier
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
At the bearing pedestal
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
expand_moreOn chassis
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Second stage
60°60°60°
Third stage
15°15°15°
expand_moreRear axle suspension
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
expand_moreAt the axle support
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws and nuts.
Second stage
60°60°60°
Third stage
15°15°15°
expand_moreOn chassis
First stage
40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace screws and nuts.
Second stage
60°60°60°
Third stage
15°15°15°
expand_moreSteering knuckle
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
expand_moreWheel hub wheel bearing
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
206.52 lbf⋅ft206.52 lbf⋅ft280 N⋅m
Replace nuts.
expand_moreWheels and tires
expand_moreTire pressure sensors
expand_more1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
Union nuts
6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
expand_moreWheel attachment
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–)
81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Vauxhall Corsa Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Corsa Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Vauxhall Corsa Van you're not only saving money, but also also improving your technical skills and learning something new.
2010 Vauxhall Corsa Van generations
In 2010 Vauxhall offered 2 generations of the Corsa Van. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.