2011 Vauxhall Combo Tour Second generation (MK2) Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Vauxhall diesel straight-4 1.7 L Y 17 DT engines | 16.23 lbf⋅ft |
1.7 DTI 16V with diesel straight-4 1.7 L 74 HP at 4400 RPM, 165 N⋅m at 1800 RPM engine (2001.10–2012.2) | 31.72 lbf⋅ft |
Air-conditioning compressor pressure line | 14.75 lbf⋅ft |
Replace sealing rings. |
On exhaust manifold | 19.91 lbf⋅ft |
Replace seals and nuts. |
Turbocharger bracket | 19.91 lbf⋅ft |
At the turbocharger | 15.49 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 7.38 lbf⋅ft |
Replace sealing rings. |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Vauxhall Combo Tour user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Combo Tour service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2011 Vauxhall Combo Tour you're not only saving money, but also also improving your technical skills and learning something new.