2012 Toyota Verso S engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system


Intake manifold	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m

expand_moreAuxiliary assemblies


Auxiliary drive belt tensioner	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Air-conditioning compressor	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Air-conditioning compressor pressure line	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAlternator


Bottom	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m
Top	36.14 lbf⋅ft36.14 lbf⋅ft49 N⋅m

expand_moreCarburetion


Exhaust gas return valve	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Exhaust recirculation pipe	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m
Fuel-distributing pipe	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m

expand_moreCooling system


Coolant pump	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreScrews 1 – 5

Figure 1. Cylinder head, Camshaft bearing, Screws 1 – 5.


First stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
See figure 1.

expand_moreScrews 1 – 18


First stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
See figure 1.
Figure 2. Cylinder head, Camshaft bearing, Screws 1 – 18.
Second stage	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
See figure 2.

expand_moreCylinder head screws

Figure 3. Cylinder head, Cylinder head screws.


First stage	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m
See figure 3.
Second stage	90°90°90°
Third stage	90°90°90°


Cylinder head screws shank length (maximum)	5.05 in5.05 in128.2 mm
Cylinder head screws shank length (new)	4.93–4.99 in4.93–4.99 in125.3–126.7 mm
Valve cover	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine block

expand_moreConnecting rod bearing


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Second stage	90°90°90°


Crankshaft central screws	94.41 lbf⋅ft94.41 lbf⋅ft128 N⋅m
Flywheel	57.53 lbf⋅ft57.53 lbf⋅ft78 N⋅m

expand_moreMain bearing


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreEngine control


Camshaft timing chain guide rail	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Camshaft timing chain slip rail	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Camshaft timing chain tensioning rail	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Chain tensioner	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Control drive chain guide rail	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Control drive chain tensioning rail	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Control unit for intake valve timing	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Inlet camshaft wheel	39.83 lbf⋅ft39.83 lbf⋅ft54 N⋅m
Outlet camshaft wheel	39.83 lbf⋅ft39.83 lbf⋅ft54 N⋅m

expand_moreTiming case cover

Figure 4. Engine control, Timing case cover.


Screws A	52.37 lbf⋅ft52.37 lbf⋅ft71 N⋅m
See figure 4.
Figure 5. Engine control, Timing case cover.
Screws B	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
See figure 5.
Screws C	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws D	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Screws E	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreEngine lubrication


Oil drain plug	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.

expand_moreOil filter housing


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.
Oil filter drain plug	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Replace sealing rings.


Oil pressure sensor	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreEngine management


Camshaft sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Charge air pressure sensor	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Crankshaft sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Knock sensor	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Lambda sensor	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine mounting


Subframe	64.17 lbf⋅ft64.17 lbf⋅ft87 N⋅m
Torque arm	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m

expand_moreTorque support bracket


At the subframe	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreExhaust system


Exhaust manifold	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Exhaust manifold heat shields	5.53 lbf⋅ft5.53 lbf⋅ft7.5 N⋅m
Exhaust pipe	31.72 lbf⋅ft31.72 lbf⋅ft43 N⋅m
Exhaust pipe rear	31.72 lbf⋅ft31.72 lbf⋅ft43 N⋅m

expand_moreIgnition system


Spark plugs	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreStart system


Starter	27.29 lbf⋅ft27.29 lbf⋅ft37 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 Toyota Verso S user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Chassis and Body Fastener Tightening Specifications
Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Verso S service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2012 Toyota Verso S you're not only saving money, but also also improving your technical skills and learning something new.

2012 Toyota Verso S First generation Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Toyota Verso S First generation model years

Suggest edit