2013 Toyota RAV4 SUV front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake


Bleed valve	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Brake hose	21.39 lbf⋅ft21.39 lbf⋅ft29 N⋅m
Front axle brake caliper	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m
Front axle brake caliper mounting support	78.92 lbf⋅ft78.92 lbf⋅ft107 N⋅m
Wheel speed sensor	6.27 lbf⋅ft6.27 lbf⋅ft8.5 N⋅m

expand_moreFront axle steering


Lower steering column joint	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Steering gear	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Steering gear heat protection plate	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Track rod end on stub axle	36.14 lbf⋅ft36.14 lbf⋅ft49 N⋅m
Track rod end on track rod	64.91 lbf⋅ft64.91 lbf⋅ft88 N⋅m

expand_moreFront axle suspension


Suspension strut bearing pedestal	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Shock-absorber piston rod	34.67 lbf⋅ft34.67 lbf⋅ft47 N⋅m

expand_moreSuspension strut


On wheel hub	177.01 lbf⋅ft177.01 lbf⋅ft240 N⋅m

expand_moreWheel suspension

expand_moreFront axle drive shaft


Diameter 26,5 mm	159.31 lbf⋅ft159.31 lbf⋅ft216 N⋅m
Otherwise	215.37 lbf⋅ft215.37 lbf⋅ft292 N⋅m


Stabiliser mounting at the stabiliser	67.86 lbf⋅ft67.86 lbf⋅ft92 N⋅m
Stabiliser mounting at suspension strut	54.58 lbf⋅ft54.58 lbf⋅ft74 N⋅m
Support joint at the transverse control arm	67.86 lbf⋅ft67.86 lbf⋅ft92 N⋅m
Supporting joint on the suspension strut mounting	98.1 lbf⋅ft98.1 lbf⋅ft133 N⋅m
Lower front transverse control arm	171.85 lbf⋅ft171.85 lbf⋅ft233 N⋅m
Lower rear transverse control arm	157.84 lbf⋅ft157.84 lbf⋅ft214 N⋅m
Stabilizer of front axle on axle	64.17 lbf⋅ft64.17 lbf⋅ft87 N⋅m

expand_moreWheels and tires


Tire pressure sensors	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Wheel attachment	75.97 lbf⋅ft75.97 lbf⋅ft103 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Toyota RAV4 SUV user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota RAV4 SUV service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Toyota RAV4 SUV you're not only saving money, but also also improving your technical skills and learning something new.

2013 Toyota RAV4 SUV generations

In 2013 Toyota offered 2 generations of the RAV4 SUV. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Third generation second facelift

ACA3#, ALA3#, GSA33, ZSA3#

2013 Toyota RAV4 SUV Fourth generation Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2013 Toyota RAV4 SUV generations

Third generation second facelift

Toyota RAV4 SUV Fourth generation model years

Suggest edit