2003 Toyota MR2 Third generation Brake System Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Front axle brake disc diameter | 10.04 in |
| Front axle brake disc thickness | 0.79 in |
| Front axle brake disc minimal thickness | 0.71 in |
| Front axle brake lining thickness | 0.43 in |
| Front axle brake lining minimal thickness | 0.039 in |
| Front axle brake piston diameter | 2.01 in |
| Maximum lateral run-out of front axle brake disc | 0.002 in |
| Maximum lateral run-out of rear axle brake disc | 0.0039 in |
| Rear axle brake disc diameter | 10.35 in |
| Rear axle brake disc thickness | 0.63 in |
| Rear axle minimal brake disc thickness | 0.59 in |
| Rear axle brake lining thickness | 0.39 in |
| Rear axle minimal brake lining thickness | 0.039 in |
| Rear axle brake piston diameter | 1.75 in |
Brake system is the most important system in your 2003 MR2. Check pads and disks from time to time and replace them as they worn below minimum thickness allowed by Toyota.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 Toyota MR2 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota MR2 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2003 Toyota MR2 you're not only saving money, but also also improving your technical skills and learning something new.