1995 Toyota Land Cruiser Ninth generation facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 8.11 lbf⋅ft |
| At the brake caliper | 0.91 in |
| Front axle brake caliper | 90.72 lbf⋅ft |
| Front axle brake disc | 54.58 lbf⋅ft |
| Steering gear | 104.73 lbf⋅ft |
| On stub axle | 70.81 lbf⋅ft |
| Track rod end on stub axle | 67.12 lbf⋅ft |
| Track rod end on track rod | 28.03 lbf⋅ft |
| Shock absorber on the axle | 50.89 lbf⋅ft |
| Shock absorber on the frame | 50.89 lbf⋅ft |
| Shock-absorber piston rod | 49.42 lbf⋅ft |
| Stabiliser | 18.44 lbf⋅ft |
| Cross beam | 126.86 lbf⋅ft |
| Stabiliser bearing | 13.28 lbf⋅ft |
| Trailing arm | 126.86 lbf⋅ft |
| Lock nuts | 47.2 lbf⋅ft |
| First stage | 43.52 lbf⋅ft |
| Second stage | Rotate hub several times |
| Third stage | 43.52 lbf⋅ft |
| Fourth stage | slacken |
| Loosen the nut until it can be turned by hand. | |
| Fifth stage | 4.43 lbf⋅ft |
| Sixth stage | 27–56 N |
| Measure the rotation resistance using a spring balance | |
| Seventh stage | 64.91 lbf⋅ft |
| Aluminium rims | 75.97 lbf⋅ft |
| Steel rims | 108.42 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1995 Toyota Land Cruiser user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Land Cruiser service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1995 Toyota Land Cruiser you're not only saving money, but also also improving your technical skills and learning something new.
1995 Toyota Land Cruiser generations
In 1995 Toyota offered 2 generations of the Land Cruiser. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.