2008 Toyota Land Cruiser Prado Third generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 8.11 lbf⋅ft |
| At the brake caliper | 11.06 lbf⋅ft |
| Union nuts | 11.06 lbf⋅ft |
| Front axle brake caliper | 90.72 lbf⋅ft |
| 3.0 D-4D (KDJ120, KDJ125) with diesel straight-4 3.0 L 170 HP engine (2002.9–2009.7) | 6.12 lbf⋅ft |
| Steering gear | 73.76 lbf⋅ft |
| Track rod end on stub axle | 67.12 lbf⋅ft |
| Replace locking pins. | |
| Track rod end on track rod | 64.91 lbf⋅ft |
| Shock-absorber piston rod | 18.44 lbf⋅ft |
| Replace nuts. | |
| At the transverse control arm | 99.57 lbf⋅ft |
| On frame | 47.2 lbf⋅ft |
| Stabiliser mounting at the stabiliser | 51.63 lbf⋅ft |
| Stabiliser mounting at the stub axle | 51.63 lbf⋅ft |
| Stabilizer mounting at the subframe | 29.5 lbf⋅ft |
| Screws | 165.95 lbf⋅ft |
| Nuts | 103.26 lbf⋅ft |
| Replace nuts. | |
| Top | 81.13 lbf⋅ft |
| Replace nuts. | |
| Upper transverse control arm | 84.82 lbf⋅ft |
| Track control arm lower | 99.57 lbf⋅ft |
| Central nuts | 173.33 lbf⋅ft |
| On stub axle | 59 lbf⋅ft |
| Wheel attachment | 82.61 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Toyota Land Cruiser Prado user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Land Cruiser Prado service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2008 Toyota Land Cruiser Prado you're not only saving money, but also also improving your technical skills and learning something new.
2008 Toyota Land Cruiser Prado generations
In 2008 Toyota offered 2 generations of the Land Cruiser Prado. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.