2007 Toyota Land Cruiser Prado Second generation facelift Emission
in your garage to make future searches easy.
| Condition | Value |
|---|
| Cut-off control speed | 4500–4700 rpm |
| Diesel conditioning gas injections | 3 |
| Maximum K-value | 2.5 1/m |
| Measuring mode | B |
| Measuring sensor | 1 |
| Measuring time | 1 s |
| Stoppage time | 5 s |
| Vehicles with EOBD | 550–800 rpm |
| Otherwise | 650–750 rpm |
| Vehicles with EOBD | 550–800 rpm |
| Otherwise | 650–750 rpm |
| Minimum engine oil temperature at VET | 176°F |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 0.5 % |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 0.3 % |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 0.03 λ |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | -10°00'±2°00' - before TDC + after TDC |
| Vehicles with EOBD | 2500–3000 rpm |
| Vehicles without EOBD | 2300–2800 rpm |
| Variant 1 | Jump type lambda sensor |
| Variant 2 | Wideband sensor |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 0.97–1.03 λ |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 100 ppm |
| Vehicles with EOBD | 2500 rpm |
| Vehicles with EOBD | 60 s |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 600–800 rpm |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 550–800 rpm |
| 3.4 i 24V (VZJ90_, VZJ95_) with gasoline V6 3.4 L 176 HP at 4800 RPM, 294 N⋅m at 3600 RPM engine (1996.4–) | 0.3 V |
| (More than). | |
To reduce environment impact and pass government inspections keep emission parameters at the level prescribed by Toyota.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 Toyota Land Cruiser Prado user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Land Cruiser Prado service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2007 Toyota Land Cruiser Prado you're not only saving money, but also also improving your technical skills and learning something new.
2007 Toyota Land Cruiser Prado generations
In 2007 Toyota offered 2 generations of the Land Cruiser Prado. Emission may vary in different generations. Be sure that you are looking at the rigt modification.