2016 Toyota Land Cruiser Prado front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake


Bleed valve	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreBrake line


At the brake caliper	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


Front axle brake caliper	90.72 lbf⋅ft90.72 lbf⋅ft123 N⋅m
Wheel speed sensor	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreFront axle steering


Lower steering column joint	26.55 lbf⋅ft26.55 lbf⋅ft36 N⋅m

expand_moreSteering gear


On frame	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m


Track rod end on stub axle	67.12 lbf⋅ft67.12 lbf⋅ft91 N⋅m
Replace nuts.

expand_moreFront axle suspension

expand_moreShock absorber


On chassis	47.2 lbf⋅ft47.2 lbf⋅ft64 N⋅m
On stub axle	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m


Shock-absorber piston rod	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.

expand_moreWheel suspension

expand_moreFront axle drive shaft


Central nuts	173.33 lbf⋅ft173.33 lbf⋅ft235 N⋅m
Replace locking pins.

expand_moreFront axle stabiliser mounting


On frame	36.14 lbf⋅ft36.14 lbf⋅ft49 N⋅m

expand_moreFront axle stabiliser mounting

expand_moreAt the stabiliser


With dynamic automatic stability control	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Without dynamic automatic stability control	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m


At the stub axle	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreUpper transverse control arm


On frame	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
On stub axle	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Replace nuts.

expand_moreStabilizer bar of front axle to bracket

expand_moreWith dynamic automatic stability control


Left	95.88 lbf⋅ft95.88 lbf⋅ft130 N⋅m
Right	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m

expand_moreStabilizer of front axle on axle

expand_moreWith dynamic automatic stability control


On stub axle	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m

expand_moreTrack control arm lower


retaining clamp at the transverse control arm	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m
Replace nuts.
On frame	129.07 lbf⋅ft129.07 lbf⋅ft175 N⋅m
Retaining clamp on stub axle	118.01 lbf⋅ft118.01 lbf⋅ft160 N⋅m

expand_moreWheel hub wheel bearing


Central nuts	173.33 lbf⋅ft173.33 lbf⋅ft235 N⋅m
Replace locking pins.
On stub axle	59 lbf⋅ft59 lbf⋅ft80 N⋅m

expand_moreWheels and tires


Wheel attachment	82.61 lbf⋅ft82.61 lbf⋅ft112 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Toyota Land Cruiser Prado user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Land Cruiser Prado service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2016 Toyota Land Cruiser Prado you're not only saving money, but also also improving your technical skills and learning something new.

2016 Toyota Land Cruiser Prado Fourth generation first facelift Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Toyota Land Cruiser Prado Fourth generation first facelift model years

Suggest edit