2006 Toyota HiAce Box Fourth generation third facelift Emission
in your garage to make future searches easy.
| Condition | Value |
|---|
| 2.4 D (LXH12_, LXH22_) with diesel straight-4 2.4 L 78 HP engine (1995.8–2006.8) | 5050–5250 rpm |
| 2.5 D-4D with diesel straight-4 2.5 L 115 HP engine (2006.9–) | 4550–4750 rpm |
| All other modifications | 4670–4930 rpm |
| Maximum K-value | 2.5 1/m |
| Diagnostic socket location | The diagnostic socket is located on the driver's side in the footwell below the dashboard. |
| 2.5 D-4D with diesel straight-4 2.5 L 101 HP engine (2001.11–2006.8) | 700–800 rpm |
| 2.5 D-4D with diesel straight-4 2.5 L 87 HP engine (2001.11–2006.8) | 700–800 rpm |
| All other modifications | 750–850 rpm |
| 2.4 TD (LXH12_, LXH22_) with diesel straight-4 2.4 L 89 HP engine (1995.8–2006.8) | 700–800 rpm |
| 2.4 TD 4WD (LXH18_, LXH28_) with diesel straight-4 2.4 L 89 HP engine (1995.8–2006.8) | 700–800 rpm |
| 2.5 D-4D with diesel straight-4 2.5 L 115 HP engine (2006.9–) | 700–800 rpm |
| All other modifications | 650–750 rpm |
| All other modifications | 176°F |
| All other modifications | 0.5 % |
| CO content at increased idling speed | 0.3 % |
| Delta lambda | 0.03 λ |
| All other modifications | -5°00' - before TDC + after TDC |
| at max. 950/min | |
| Toyota gasoline straight-4 2.7 L 3RZ-FE 141 HP | 2500–3000 rpm |
| Toyota gasoline straight-4 2.7 L 3RZ-FE 142 HP | 2500–3000 rpm |
| All other modifications | 2300–2800 rpm |
| Lambda sensor design | Jump type lambda sensor |
| All other modifications | 0.97–1.03 λ |
| Maximum HC content at idling | 100 ppm |
| Speed for disturbance variable | 550–950 rpm |
| Test speed for lambda sensor signal | 550–900 rpm |
| Voltage swing at test speed | 0.4 V |
| (More than). | |
To reduce environment impact and pass government inspections keep emission parameters at the level prescribed by Toyota.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Toyota HiAce Box user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota HiAce Box service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Toyota HiAce Box you're not only saving money, but also also improving your technical skills and learning something new.
2006 Toyota HiAce Box generations
In 2006 Toyota offered 3 generations of the HiAce Box. Emission may vary in different generations. Be sure that you are looking at the rigt modification.