1998 Toyota HiAce Box Fourth generation second facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 8.11 lbf⋅ft |
Brake hose | 22.13 lbf⋅ft |
All other modifications | 25.08 lbf⋅ft |
2.4 4WD (RCH18_, RCH28_) with gasoline straight-4 2.4 L 114 HP engine (1995.8–1998.4) | 75.97 lbf⋅ft |
2.4 TD 4WD (LXH18_, LXH28_) with diesel straight-4 2.4 L 89 HP engine (1995.8–2006.8) | 75.97 lbf⋅ft |
All other modifications | 108.42 lbf⋅ft |
All other modifications | 52.37 lbf⋅ft |
Steering gear | 87.03 lbf⋅ft |
2.4 4WD (RCH18_, RCH28_) with gasoline straight-4 2.4 L 114 HP engine (1995.8–1998.4) | 118.01 lbf⋅ft |
Coated screws | |
2.4 TD 4WD (LXH18_, LXH28_) with diesel straight-4 2.4 L 89 HP engine (1995.8–2006.8) | 118.01 lbf⋅ft |
Coated screws | |
2.7 4WD (RCH19_, RCH29_) with gasoline straight-4 2.7 L 142 HP engine (1998.4–) | 118.01 lbf⋅ft |
Coated screws | |
All other modifications | 64.17 lbf⋅ft |
Track rod end on stub axle | 67.12 lbf⋅ft |
Track rod end on track rod | 64.91 lbf⋅ft |
Adjusting screws | 57.53 lbf⋅ft |
At the transverse control arm | 88.51 lbf⋅ft |
Torsion bar mounting | 64.17 lbf⋅ft |
Bottom | 70.07 lbf⋅ft |
Top | Tighten shock absorber nut(s) as far as necessary until the thread projects by 9.5 - 11.5 mm. |
Front axle stabiliser mounting | 8.85 lbf⋅ft |
Stabiliser mounting at the axle control arm | 38.35 lbf⋅ft |
Bottom | 103.26 lbf⋅ft |
Top | 103.26 lbf⋅ft |
All other modifications | 53.1 lbf⋅ft |
Wishbone | 166.69 lbf⋅ft |
Wishbone | 123.91 lbf⋅ft |
Strut | 84.82 lbf⋅ft |
Bottom | 53.1 lbf⋅ft |
Wishbone | 108.42 lbf⋅ft |
Ball joint | 103.26 lbf⋅ft |
Stabiliser bearing | 8.85 lbf⋅ft |
Strut central nuts | 89.25 lbf⋅ft |
Bottom | 106.95 lbf⋅ft |
Wishbone | 125.39 lbf⋅ft |
Wishbone | 81.13 lbf⋅ft |
Bottom | 42.04 lbf⋅ft |
Top | 106.95 lbf⋅ft |
At the bearing pedestal | 166.69 lbf⋅ft |
On frame | 108.42 lbf⋅ft |
On frame | 123.17 lbf⋅ft |
At the transverse control arm | 84.82 lbf⋅ft |
On chassis | 88.51 lbf⋅ft |
Stub axle | 103.26 lbf⋅ft |
Central screws | 13.28 lbf⋅ft |
Flange nuts | 22.13 lbf⋅ft |
First stage | 43.52 lbf⋅ft |
Second stage | Rotate hub several times |
Third stage | 17.7 lbf⋅ft |
Outside lock nuts | 34.67 lbf⋅ft |
2.4 D (LXH12_, LXH22_) with diesel straight-4 2.4 L 78 HP engine (1995.8–2006.8) | 25.08 lbf⋅ft |
2.4 TD (LXH12_, LXH22_) with diesel straight-4 2.4 L 89 HP engine (1995.8–2006.8) | 25.08 lbf⋅ft |
Central screws | 13.28 lbf⋅ft |
Flange nuts | 22.13 lbf⋅ft |
First stage | 43.52 lbf⋅ft |
Second stage | Rotate hub several times |
Third stage | 17.7 lbf⋅ft |
Outside lock nuts | 34.67 lbf⋅ft |
Central screws | 13.28 lbf⋅ft |
Flange nuts | 22.13 lbf⋅ft |
First stage | 43.52 lbf⋅ft |
Second stage | Rotate hub several times |
Third stage | 17.7 lbf⋅ft |
Outside lock nuts | 34.67 lbf⋅ft |
First stage | 25.08 lbf⋅ft |
Second stage | Rotate hub several times |
Third stage | slacken |
Fourth stage | 4.43–13.28 lbf⋅ft |
Axial end play of wheel bearing must not exceed 0,05 mm. |
All other modifications | 75.97 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1998 Toyota HiAce Box user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota HiAce Box service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1998 Toyota HiAce Box you're not only saving money, but also also improving your technical skills and learning something new.
1998 Toyota HiAce Box generations
In 1998 Toyota offered 2 generations of the HiAce Box. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.