in your garage to make future searches easy.

Condition Value
expand_moreDiesel exhaust gas values
expand_moreCut-off control speed
All Toyota diesel straight-4 2.0 L 2C-E engines 51005300 rpm
expand_moreDiesel conditioning gas injections
Maximum K-value 2.5 1/m
expand_moreMeasuring mode
expand_moreMeasuring sensor
expand_moreMeasuring time
expand_moreStoppage time
expand_moreGeneral exhaust gas values
Diagnostic socket location The diagnostic socket is at the
lower edge of the dashboard on the
driver's side.
expand_moreIdling speed with automatic gearbox
Vehicles with EOBD 550800 rpm
Otherwise 600750 rpm
Toyota gasoline straight-4 1.3 L 4E-FE 84 HP 600750 rpm
All other modifications 650750 rpm
expand_moreIdling speed with manual gearbox
Vehicles with EOBD 550800 rpm
Otherwise 600750 rpm
Toyota diesel straight-4 2.0 L 2C-E 71 HP at 1975 RPM, 131 N⋅m at 2600 RPM 700800 rpm
Toyota gasoline straight-4 1.3 L 4E-FE 84 HP 600750 rpm
All other modifications 600700 rpm
Minimum engine oil temperature at VET 176°F
expand_morePetrol exhaust gas values
CO content at idling speed 0.5 %
CO content at increased idling speed 0.3 %
Delta lambda 0.03 λ
Ignition time -10°00'±2°00' - before TDC + after
TDC
expand_moreIncreased idling speed
Vehicles with EOBD 25003000 rpm
Otherwise 23002800 rpm
All other modifications 23002800 rpm
expand_moreLambda sensor design
Vehicles with EOBD Jump type lambda sensor
Lambda value 0.971.03 λ
Maximum HC content at idling 100 ppm
Petrol conditioning speed 2500 rpm
expand_morePetrol conditioning time
Vehicles with EOBD 60 s
Otherwise 120 s
Toyota gasoline straight-4 1.3 L 4E-FE 84 HP 120 s
expand_moreSpeed for disturbance variable
Toyota gasoline straight-4 1.6 L 4A-FE 106 HP 500850 rpm
Toyota gasoline straight-4 1.3 L 4E-FE 84 HP 500900 rpm
Test speed for lambda sensor signal 550800 rpm
expand_moreVoltage swing at test speed
Vehicles with EOBD 0.4 V
(More than).

To reduce environment impact and pass government inspections keep emission parameters at the level prescribed by Toyota.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1998 Toyota Corolla Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1998 Toyota Corolla Wagon you're not only saving money, but also also improving your technical skills and learning something new.

1998 Toyota Corolla Wagon generations

In 1998 Toyota offered 2 generations of the Corolla Wagon. Emission may vary in different generations. Be sure that you are looking at the rigt modification.

Toyota Corolla Wagon Eighth generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat