in your garage to make future searches easy.
| Condition | Value |
|---|
| Diagnostic socket location | The diagnostic socket is at the lower edge of the dashboard on the driver's side. |
| Toyota diesel straight-4 1.4 L 1ND-TV 89 HP | Yes |
| Toyota gasoline straight-4 1.3 L 1NR-FE 99 HP | Yes |
| All other modifications | No |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 650–750 rpm |
| Minimum engine oil temperature at VET | 176°F |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 0.5 % |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 0.3 % |
| Toyota gasoline straight-4 1.6 L 1ZR-FE 130 HP | -10°00'2°00' - before TDC + after TDC |
| Toyota gasoline straight-4 1.6 L 1ZR-FAE 130 HP at 6400 RPM, 160 N⋅m at 4400 RPM | -10°00'2°00' - before TDC + after TDC |
| Toyota gasoline straight-4 1.4 L 4ZZ-FE 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM | -10°00'±2°00' - before TDC + after TDC |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 2300–2800 rpm |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | Jump type lambda sensor |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 0.97–1.03 λ |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 100 ppm |
| 1.33 with gasoline straight-4 1.3 L 99 HP engine (2007.1–) | 2500–3000 rpm |
| 1.33 with gasoline straight-4 1.3 L 99 HP engine (2007.1–) | 120 s |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 550–800 rpm |
| 1.4 VVT-i with gasoline straight-4 1.4 L 95 HP at 6000 RPM, 130 N⋅m at 4800 RPM engine (2007.1–) | 0.4 V |
| (More than). | |
To reduce environment impact and pass government inspections keep emission parameters at the level prescribed by Toyota.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2020 Toyota Corolla Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2020 Toyota Corolla Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2020 Toyota Corolla Sedan generations
In 2020 Toyota offered 3 generations of the Corolla Sedan. Emission may vary in different generations. Be sure that you are looking at the rigt modification.