2000 Toyota Camry Sedan Fourth generation facelift (wide body) Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 14.01 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 14.01 lbf⋅ft |
Lower section of intake manifold | 11.06 lbf⋅ft |
Upper section of intake manifold | 31.72 lbf⋅ft |
Auxiliary drive belt deflection pulley | 30.98 lbf⋅ft |
Auxiliary drive belt tensioner | 30.98 lbf⋅ft |
At the cylinder head | 9.59 lbf⋅ft |
3.0 24V (MCV20_) with gasoline V6 3.0 L 188 HP engine (1996.8–2001.11) | 0.34 in |
First stage | 36.14 lbf⋅ft |
See figure 1. | |
Second stage | 90° |
First stage | 36.14 lbf⋅ft |
See figure 1. | |
Second stage | 90° |
First stage | 39.83 lbf⋅ft |
See figure 2. | |
Second stage | 90° |
Hexagon socket screws | 14.01 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Second stage | 90° |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 79.66 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 79.66 lbf⋅ft |
Toyota gasoline V6 3.0 L 1MZ-FE 188 HP | 158.58 lbf⋅ft |
Drive plate | 61.22 lbf⋅ft |
Replace the coated screws | |
Flywheel | 64.91 lbf⋅ft |
Replace the coated screws |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 43.52 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 43.52 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | 16.23 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Second stage | 90° |
Lateral-fitting screw | 19.91 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 30.98 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 30.98 lbf⋅ft |
Toyota gasoline V6 3.0 L 1MZ-FE 188 HP | 31.72 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 39.83 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 39.83 lbf⋅ft |
Toyota gasoline V6 3.0 L 1MZ-FE 188 HP | 93.67 lbf⋅ft |
3.0 24V (MCV20_) with gasoline V6 3.0 L 188 HP engine (1996.8–2001.11) | 6.64 lbf⋅ft |
3.0 24V (MCV20_) with gasoline V6 3.0 L 188 HP engine (1996.8–2001.11) | 5.9 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 30.98 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 30.98 lbf⋅ft |
Toyota gasoline V6 3.0 L 1MZ-FE 188 HP | 25.08 lbf⋅ft |
3.0 24V (MCV20_) with gasoline V6 3.0 L 188 HP engine (1996.8–2001.11) | 19.91 lbf⋅ft |
Nuts on the engine block | 5.9 lbf⋅ft |
Oil drain plug | 27.29 lbf⋅ft |
Banjo screws | 58.27 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 4.43 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 4.43 lbf⋅ft |
Oil sump lower part | 5.9 lbf⋅ft |
Code range 10 mm | 5.9 lbf⋅ft |
Code range 12 mm | 14.75 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 125 HP at 5400 RPM, 196 N⋅m at 4000 RPM | 27.29 lbf⋅ft |
Toyota gasoline straight-4 2.2 L 5S-FE 129 HP | 27.29 lbf⋅ft |
Toyota gasoline V6 3.0 L 1MZ-FE 188 HP | 28.76 lbf⋅ft |
Lambda sensor | 32.45 lbf⋅ft |
3.0 24V (MCV20_) with gasoline V6 3.0 L 188 HP engine (1996.8–2001.11) | 20.65 lbf⋅ft |
Top | 47.2 lbf⋅ft |
Stabiliser | 47.2 lbf⋅ft |
Right | 38.35 lbf⋅ft |
Bottom | 59 lbf⋅ft |
Front | 59 lbf⋅ft |
Rear | 48.68 lbf⋅ft |
On the engine block | 56.79 lbf⋅ft |
Exhaust manifold | 36.14 lbf⋅ft |
At the exhaust manifold | 45.73 lbf⋅ft |
Banjo screws | 21.39 lbf⋅ft |
Union nuts | 22.13 lbf⋅ft |
Banjo screws | 21.39 lbf⋅ft |
Union nuts | 22.13 lbf⋅ft |
Banjo bolts and union nuts | 21.39 lbf⋅ft |
Spark plugs | 13.28 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2000 Toyota Camry Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Camry Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2000 Toyota Camry Sedan you're not only saving money, but also also improving your technical skills and learning something new.
Toyota Camry Sedan Fourth generation facelift (wide body) model years
logo_toyota 1999-
logo_toyota 2000 logo_toyota 2001