2026 Toyota Aygo Second generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Intake manifold | 22.13 lbf⋅ft |
| Auxiliary drive belt tensioner | 39.83 lbf⋅ft |
| Air-conditioning compressor | 18.44 lbf⋅ft |
| Air-conditioning compressor pressure line | 7.38 lbf⋅ft |
| Bottom | 25.08 lbf⋅ft |
| Top | 39.83 lbf⋅ft |
| Exhaust gas return valve | 22.13 lbf⋅ft |
| Fuel-distributing pipe | 19.91 lbf⋅ft |
| Coolant pump | 20.65 lbf⋅ft |
| First stage | 9.59 lbf⋅ft |
| See figure 1. | |
| Second stage | 11.06 lbf⋅ft |
| First stage | 23.6 lbf⋅ft |
| Heed bolt length. See figure 2. | |
| Second stage | 180° |
| Cylinder head screws shank length (maximum) | 4.86 in |
| Cylinder head screws shank length (new) | 4.8 in |
|
|
| Valve cover | 5.9 lbf⋅ft |
| See figure 3. | |
| First stage | 11.06 lbf⋅ft |
| Second stage | 90° |
| Crankshaft central screws | 125.39 lbf⋅ft |
| Flywheel | 57.53 lbf⋅ft |
| Use screw-locking compound. | |
| Main bearing | 43.52 lbf⋅ft |
| Tighten bolts uniformly in several passes. | |
| Camshaft timing chain guide rail | 6.64 lbf⋅ft |
| Camshaft timing chain tensioner | 7.38 lbf⋅ft |
| Camshaft timing chain tensioning rail | 14.01 lbf⋅ft |
| Inlet camshaft wheel | 34.67 lbf⋅ft |
| Outlet camshaft wheel | 34.67 lbf⋅ft |
| Screws 1 – 4 | 39.83 lbf⋅ft |
| See figure 4. | |
| Screws 5 – 9 | 29.5 lbf⋅ft |
| Screws 10 – 15 | 17.7 lbf⋅ft |
| Screws 16 – 20 | 20.65 lbf⋅ft |
| Oil drain plug | 21.39 lbf⋅ft |
| Replace sealing rings. | |
| Screws 1 – 9 | 17.7 lbf⋅ft |
| See figure 5. | |
| Screws 10 | 7.38 lbf⋅ft |
| Camshaft sensor | 5.53 lbf⋅ft |
| Crankshaft sensor | 5.53 lbf⋅ft |
| Knock sensor | 14.75 lbf⋅ft |
| Lambda sensor | 32.45 lbf⋅ft |
| On chassis | 38.35 lbf⋅ft |
| On timing case cover | 38.35 lbf⋅ft |
| Front | 62.69 lbf⋅ft |
| Rear | 35.4 lbf⋅ft |
| At the subframe | 81.13 lbf⋅ft |
| Onto torque support bracket | 88.51 lbf⋅ft |
| At the gearbox | 38.35 lbf⋅ft |
| Catalytic converter | 21.39 lbf⋅ft |
| Catalytic converter bracket | 17.7 lbf⋅ft |
| Stud screws | 5.16 lbf⋅ft |
| Exhaust pipe | 31.72 lbf⋅ft |
| Exhaust pipe rear | 31.72 lbf⋅ft |
| Spark plugs | 14.75 lbf⋅ft |
| Starter | 27.29 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2026 Toyota Aygo user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Aygo service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2026 Toyota Aygo you're not only saving money, but also also improving your technical skills and learning something new.