2001 Saab 9-3 Sedan First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Lower section of intake manifold | 14.75 lbf⋅ft |
Upper section of intake manifold | 7.38 lbf⋅ft |
All other modifications | 17.7 lbf⋅ft |
Bottom | 16.96 lbf⋅ft |
Screws | 30.98 lbf⋅ft |
Air-conditioning compressor | 34.67 lbf⋅ft |
Air-conditioning compressor pressure line | 14.75 lbf⋅ft |
Alternator | 25.81 lbf⋅ft |
Generator bracket | 14.75 lbf⋅ft |
Servo steering pump | 14.75 lbf⋅ft |
Vacuum pump | 5.9 lbf⋅ft |
Injection hoses | 18.44 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Second stage | 360° |
Front | 18.44 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
Injection pump pulley | 14.75 lbf⋅ft |
Nuts | 18.44 lbf⋅ft |
Stud screws | 16.23 lbf⋅ft |
Coolant pump | 14.75 lbf⋅ft |
Coolant pump pulley | 14.75 lbf⋅ft |
Saab diesel straight-4 2.2 L D223L 123 HP | 14.75 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 65° |
Third stage | 65° |
Fourth stage | 65° |
Fifth stage | 65° |
Sixth stage | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
See figure 2. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 17.7 lbf⋅ft |
Saab diesel straight-4 2.2 L D223L 123 HP | 5.9 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Balance shaft gear wheel | 18.44 lbf⋅ft |
Deflection pulley |
First stage | 25.81 lbf⋅ft |
Use new screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Second stage | 70° |
First stage | 110.63 lbf⋅ft |
Second stage | 45° |
All other modifications | 129.07 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
High-strength screw-locking compound | |
Second stage | 50° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
First stage | 14.75 lbf⋅ft |
High-strength screw-locking compound | |
Second stage | 50° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 60° |
First stage | 14.75 lbf⋅ft |
Second stage | 70° |
Balance shaft timing chain guide rail | 7.38 lbf⋅ft |
Balance shaft timing chain tension rail | 7.38 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
All other modifications | 46.47 lbf⋅ft |
Chain tensioner locking screws | 16.23 lbf⋅ft |
Control drive chain guide rail | 7.38 lbf⋅ft |
Saab diesel straight-4 2.2 L D223L 123 HP | 44.25 lbf⋅ft |
All other modifications | 46.47 lbf⋅ft |
Control drive chain tensioning rail | 7.38 lbf⋅ft |
Drive chain balance shaft tensioner | 7.38 lbf⋅ft |
Saab diesel straight-4 2.2 L D223L 123 HP | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Saab diesel straight-4 2.2 L D223L 123 HP | 13.28 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Oil filter cover | 19.18 lbf⋅ft |
Otherwise | 14.75 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Surface seal (cf. LOCTITE® 518) |
Camshaft sensor | 13.28 lbf⋅ft |
Crankshaft sensor | 5.9 lbf⋅ft |
Glow plugs | 7.38 lbf⋅ft |
Knock sensor | 16.23 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Center | 140.14 lbf⋅ft |
Front | 84.82 lbf⋅ft |
First stage | 81.13 lbf⋅ft |
Second stage | 75° |
Saab diesel straight-4 2.2 L D223L 123 HP | 16.23 lbf⋅ft |
Replace screws and nuts. | |
All other modifications | 13.28 lbf⋅ft |
Spark plugs | 20.65 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 Saab 9-3 Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Saab warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Saab 9-3 Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2001 Saab 9-3 Sedan you're not only saving money, but also also improving your technical skills and learning something new.
Saab 9-3 Sedan First generation model years
logo_saab 1998logo_saab 1999logo_saab 2000-
logo_saab 2001 logo_saab 2002logo_saab 2003