in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 12.54 lbf⋅ft
Brake hose 29.5 lbf⋅ft
Replace sealing rings.
Brake line 13.28 lbf⋅ft
Front axle brake caliper 20.65 lbf⋅ft
expand_moreFront axle brake caliper mounting support
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 4560°
Front axle brake disc 6.64 lbf⋅ft
Wheel speed sensor 4.43 lbf⋅ft
expand_moreFront axle steering
expand_moreLower steering column joint
First stage 18.44 lbf⋅ft
Use new screw.
Second stage 180°
Steering column 16.23 lbf⋅ft
Use new screws.
Steering column joint upper 25.08 lbf⋅ft
Use new screw.
expand_moreSteering gear
expand_moreAt the subframe
First stage 81.13 lbf⋅ft
Replace screws.
Second stage 150165°
Steering wheel 33.19 lbf⋅ft
Replace screws.
expand_moreTrack rod end on stub axle
First stage 25.81 lbf⋅ft
Replace nuts.
Second stage 3045°
expand_moreTrack rod end on track rod
Lock nuts 44.25 lbf⋅ft
Track rod on steering gear 77.44 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 51.63 lbf⋅ft
expand_moreSuspension strut
On chassis 33.19 lbf⋅ft
expand_moreOn stub axle
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 6070°
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreCentral nuts
First stage 110.63 lbf⋅ft
Replace nuts.
Second stage 45° detach
Third stage 184.39 lbf⋅ft
expand_moreFront axle stabiliser mounting
First stage 16.23 lbf⋅ft
Replace screws.
Second stage 30°
Third stage 15°
Stabiliser mounting at the stabiliser 47.94 lbf⋅ft
Replace nuts.
Stabiliser mounting at suspension strut 47.94 lbf⋅ft
Replace nuts.
expand_moreStabilizer mounting at the subframe
First stage 16.23 lbf⋅ft
Second stage 3045°
expand_moreSupport joint at the stub axle
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 6075°
expand_moreTransverse control arm
expand_moreAt the subframe
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 7590°
expand_moreTo wishbone bearing
First stage 40.57 lbf⋅ft
Use new screw.
Second stage 45°
Third stage 60°
expand_moreWishbone bearing
expand_moreAt the subframe
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 7590°
expand_moreWheel hub wheel bearing
expand_moreWheel bearing unit
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 60°
Third stage 15°
expand_moreWheels and tires
Tire pressure sensors 6.64 lbf⋅ft
Wheel attachment 103.26 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Opel Zafira MPV user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Zafira MPV service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2016 Opel Zafira MPV you're not only saving money, but also also improving your technical skills and learning something new.

2016 Opel Zafira MPV generations

In 2016 Opel offered 2 generations of the Zafira MPV. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Opel Zafira MPV Tourer C2 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat