in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 6.64 lbf⋅ft
Brake hose 11.8 lbf⋅ft
Replace sealing rings.
Brake line 11.8 lbf⋅ft
Front axle brake caliper 22.13 lbf⋅ft
Front axle brake caliper mounting support 169.64 lbf⋅ft
Use new screws.
Front axle brake disc 5.16 lbf⋅ft
expand_moreFront axle steering
expand_moreSteering gear
First stage 33.19 lbf⋅ft
Use new screws and nuts.
Second stage 45°
Third stage 15°
Track rod end on stub axle 25.81 lbf⋅ft
Track rod end on track rod 44.25 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 73.76 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
expand_moreOn chassis
expand_moreTop
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
Third stage 15°
expand_moreBottom on stub axle
First stage 36.88 lbf⋅ft
Replace screws and nuts.
expand_moreSecond stage
First step 62.69 lbf⋅ft
Second step 75°
Third step 15°
expand_moreWheel suspension
expand_moreFront axle drive shaft
First stage 110.63 lbf⋅ft
Replace protective caps.
Second stage 45° detach
Third stage 184.39 lbf⋅ft
Front axle stabiliser mounting 14.75 lbf⋅ft
Stabiliser mounting at suspension strut 47.94 lbf⋅ft
Replace nuts.
expand_moreSupport joint at the stub axle
First stage 22.13 lbf⋅ft
Replace nuts.
Second stage 60°
Third stage 15°
expand_moreTransverse control arm
expand_moreAt the subframe
First stage 66.38 lbf⋅ft
Second stage 75°
Third stage 15°
expand_moreLower front transverse control arm
First stage 66.38 lbf⋅ft
Second stage 75°
Third stage 15°
expand_moreLower rear transverse control arm
First stage 66.38 lbf⋅ft
Second stage 75°
Third stage 15°
Stabilizer of front axle on axle 47.94 lbf⋅ft
expand_moreTrack control arm lower
expand_moreAt the axle support
First stage 66.38 lbf⋅ft
Second stage 75°
Third stage 15°
expand_moreWheel hub wheel bearing
expand_moreWheel bearing unit
First stage 73.76 lbf⋅ft
Replace screws and nuts.
Second stage 60°
Third stage 15°
expand_moreWheels and tires
Tire pressure sensors 7.38 lbf⋅ft
Wheel attachment 81.13 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2004 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2004 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.

2004 Opel Vectra Sedan generations

In 2004 Opel offered 2 generations of the Vectra Sedan. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Opel Vectra Sedan C model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat