1995 Opel Vectra Sedan rear suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreRear axle brake


Brake drum	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Rear axle bleeder valve	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Rear axle brake caliper	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screws with the screw- locking compound.
Rear axle brake disc	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Rear axle brake hose	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Rear axle wheel brake cylinder	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreRear axle suspension

expand_moreRear axle suspension strut


On chassis	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreTrailing arm


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws.
Second stage	30°30°30°
Third stage	15°15°15°

expand_moreRear axle wheel suspension

expand_moreRear axle carrier


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Second stage	60°60°60°
Third stage	15°15°15°


Rear axle stabilizer mounting	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Rear axle stabilizer support at the axle control arm	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreRear axle suspension


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	60°60°60°
Third stage	15°15°15°

expand_moreTrack control arm lower

expand_moreOpel gasoline straight-4 1.6 L X 16 SZR 74 HP at 5200 RPM, 128 N⋅m at 2800 RPM


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws and nuts.
Second stage	60°60°60°
Third stage	15°15°15°

expand_moreAll other modifications


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Important! Do not tighten the transverse control arm screws until the vehicle is on the ground.
Second stage	75°75°75°
Third stage	15°15°15°

expand_moreTrack control arm upper


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Important! Do not tighten the transverse control arm screws until the vehicle is on the ground.
Second stage	60°60°60°
Third stage	15°15°15°

expand_moreWheel hub wheel bearing

expand_moreWheel bearing unit


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace nuts.
Second stage	30°30°30°
Third stage	15°15°15°

expand_moreWheels and tires


Wheel attachment	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1995 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1995 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.

1995 Opel Vectra Sedan generations

In 1995 Opel offered 2 generations of the Vectra Sedan. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

A2

GM2900 Platform

1995 Opel Vectra Sedan B Rear Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

1995 Opel Vectra Sedan generations

A2

Opel Vectra Sedan B model years

Suggest edit