in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
expand_moreFront axle drive shaft
expand_moreCentral nuts
First stage 95.88 lbf⋅ft
Insert new locking pin.
Second stage slacken
Third stage 14.75 lbf⋅ft
Fourth stage 80°
Propeller shaft 22.13 lbf⋅ft
Rear axle drive flange 221.27 lbf⋅ft
Replace nuts.
expand_moreRear axle drive shaft
expand_moreCentral nuts
First stage 95.88 lbf⋅ft
Insert new locking pin.
Second stage slacken
Third stage 14.75 lbf⋅ft
Fourth stage 80°
expand_moreClutch
Clutch pressure plate 11.06 lbf⋅ft
expand_moreRelease bearing guide sleeve
2.0 i 16V 4x4 with gasoline straight-4 2.0 L 134 HP at 5600 RPM, 185 N⋅m at 4000 RPM engine (1994.6–1995.11) 16.23 lbf⋅ft
2.5 V6 with gasoline V6 2.5 L 168 HP at 6000 RPM, 227 N⋅m at 4000 RPM engine (1993.2–1995.11) 8.85 lbf⋅ft
All other modifications 3.69 lbf⋅ft
expand_moreDifferential
expand_moreDifferential cover
All Opel gasoline straight-4 2.0 L C 20 LET engines 22.13 lbf⋅ft
All Opel gasoline straight-4 2.0 L X 20 XEV engines 29.5 lbf⋅ft
expand_moreAll other modifications
With Aluminium cover 13.28 lbf⋅ft
With sheet metal cap 22.13 lbf⋅ft
expand_moreGear shifting
expand_moreGear rod
Clamping screws 11.06 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
2.0 i Turbo 4x4 with gasoline straight-4 2.0 L 201 HP at 5600 RPM, 280 N⋅m at 2400 RPM engine (1994.6–1995.11) 44.25 lbf⋅ft
expand_moreAll other modifications
M10 33.19 lbf⋅ft
M12 44.25 lbf⋅ft
expand_moreGearbox lubrication
expand_moreOil control plug
2.0 i Turbo 4x4 with gasoline straight-4 2.0 L 201 HP at 5600 RPM, 280 N⋅m at 2400 RPM engine (1994.6–1995.11) 22.13 lbf⋅ft
2.5 V6 with gasoline V6 2.5 L 168 HP at 6000 RPM, 227 N⋅m at 4000 RPM engine (1993.2–1995.11) 36.88 lbf⋅ft
expand_moreAll other modifications
First stage 2.95 lbf⋅ft
Second stage 45180°
expand_moreGearbox mounting
Gearbox support 44.25 lbf⋅ft
expand_moreTransfer case
expand_moreTransfer box bracket
expand_more2.0 i Turbo 4x4 with gasoline straight-4 2.0 L 201 HP at 5600 RPM, 280 N⋅m at 2400 RPM engine (1994.6–1995.11)
On the engine block 44.25 lbf⋅ft
Otherwise 16.23 lbf⋅ft
expand_moreTransfer box onto transmission flange connection
2.0 i Turbo 4x4 with gasoline straight-4 2.0 L 201 HP at 5600 RPM, 280 N⋅m at 2400 RPM engine (1994.6–1995.11) 14.75 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1995 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1995 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.

1995 Opel Vectra Sedan generations

In 1995 Opel offered 2 generations of the Vectra Sedan. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Opel Vectra Sedan A2 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat