in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 4.43 lbf⋅ft
Brake line 11.8 lbf⋅ft
expand_moreFront axle brake caliper
With handbrake caliper 22.13 lbf⋅ft
With parking brake caliper 70.07 lbf⋅ft
expand_moreFront axle brake caliper mounting support
Opel diesel straight-4 1.7 L 17 D 56 HP 70.07 lbf⋅ft
Opel gasoline straight-4 1.4 L 14 NV 74 HP 70.07 lbf⋅ft
Opel gasoline straight-4 1.6 L E 16 NZ 74 HP 70.07 lbf⋅ft
Opel gasoline straight-4 1.6 L C 16 NZ2 74 HP 70.07 lbf⋅ft
Opel gasoline straight-4 1.6 L C 16 NZ 74 HP at 5200 RPM, 125 N⋅m at 3200 RPM 70.07 lbf⋅ft
Opel diesel straight-4 1.7 L 17 DT (TC4EE1) 80 HP 70.07 lbf⋅ft
Opel diesel straight-4 1.7 L X 17 DT (TC4EE1) 80 HP at 4400 RPM, 168 N⋅m at 2400 RPM 70.07 lbf⋅ft
Opel gasoline straight-4 1.6 L 16 SV 80 HP at 5400 RPM, 130 N⋅m at 3400 RPM 70.07 lbf⋅ft
Opel gasoline straight-4 1.8 L 18 SV 89 HP 70.07 lbf⋅ft
All other modifications 59 lbf⋅ft
Front axle brake disc 2.95 lbf⋅ft
expand_moreWheel speed sensor
At the bracket 5.9 lbf⋅ft
expand_moreFront axle steering
expand_morePressure line at steering gear
Manufacturer ZF 28.03 lbf⋅ft
Saginaw 20.65 lbf⋅ft
expand_moreReturn line to steering gear
Manufacturer ZF 28.03 lbf⋅ft
Saginaw 20.65 lbf⋅ft
Steering gear 16.23 lbf⋅ft
Track rod end on stub axle 44.25 lbf⋅ft
Track rod end on track rod 14.75 lbf⋅ft
Track rod on steering gear 70.07 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 51.63 lbf⋅ft
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreCentral nuts
First stage 95.88 lbf⋅ft
Insert new locking pin.
Second stage slacken
Third stage 14.75 lbf⋅ft
Fourth stage 80°
Front axle stabiliser mounting 14.75 lbf⋅ft
Stabiliser mounting at the axle control arm 7.38 lbf⋅ft
Keep pre-tensioning dimension 38 - 39 mm
Stabiliser mounting at the stabiliser 47.94 lbf⋅ft
Support joint at the stub axle 51.63 lbf⋅ft
Insert new locking pin.
Support joint at the transverse control arm 44.25 lbf⋅ft
Replace screws and nuts.
expand_moreFront axle suspension
Front 84.82 lbf⋅ft
Replace screws.
Rear 125.39 lbf⋅ft
Replace screws.
expand_moreLower front transverse control arm
First stage 73.76 lbf⋅ft
Replace screws.
Second stage 6075°
expand_moreLower rear transverse control arm
First stage 73.76 lbf⋅ft
Replace screws.
Second stage 7590°
expand_moreWheel hub wheel bearing
expand_moreCentral nuts
First stage 95.88 lbf⋅ft
Second stage slacken
Third stage 14.75 lbf⋅ft
Fourth stage 80°
expand_moreWheels and tires
Wheel attachment 81.13 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1990 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1990 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.

Opel Vectra Sedan A model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat