1990 Opel Vectra Hatchback A Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 4.43 lbf⋅ft |
Brake line | 11.8 lbf⋅ft |
With handbrake caliper | 22.13 lbf⋅ft |
With parking brake caliper | 70.07 lbf⋅ft |
All Opel gasoline straight-4 2.0 L 20 NE engines | 59 lbf⋅ft |
All Opel gasoline straight-4 2.0 L 20 SEH engines | 59 lbf⋅ft |
All Opel gasoline straight-4 2.0 L 20 XEJ engines | 59 lbf⋅ft |
All Opel gasoline straight-4 1.8 L C 18 NZ engines | 59 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 NE engines | 59 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 XE engines | 59 lbf⋅ft |
All other modifications | 70.07 lbf⋅ft |
Front axle brake disc | 2.95 lbf⋅ft |
Wheel speed sensor | 5.9 lbf⋅ft |
Manufacturer ZF | 28.03 lbf⋅ft |
Saginaw | 20.65 lbf⋅ft |
Manufacturer ZF | 28.03 lbf⋅ft |
Saginaw | 20.65 lbf⋅ft |
Steering gear | 16.23 lbf⋅ft |
Track rod end on stub axle | 44.25 lbf⋅ft |
Track rod end on track rod | 14.75 lbf⋅ft |
Track rod on steering gear | 70.07 lbf⋅ft |
Shock-absorber piston rod | 51.63 lbf⋅ft |
First stage | 95.88 lbf⋅ft |
Insert new locking pin. | |
Second stage | slacken |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 80° |
Front axle stabiliser mounting | 14.75 lbf⋅ft |
Stabiliser mounting at the axle control arm | 7.38 lbf⋅ft |
Keep pre-tensioning dimension 38 - 39 mm | |
Stabiliser mounting at the stabiliser | 47.94 lbf⋅ft |
Support joint at the stub axle | 51.63 lbf⋅ft |
Insert new locking pin. | |
Support joint at the transverse control arm | 44.25 lbf⋅ft |
Replace screws and nuts. |
Front | 84.82 lbf⋅ft |
Replace screws. | |
Rear | 125.39 lbf⋅ft |
Replace screws. |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 60–75° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 75–90° |
First stage | 95.88 lbf⋅ft |
Second stage | slacken |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 80° |
Wheel attachment | 81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1990 Opel Vectra Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1990 Opel Vectra Hatchback you're not only saving money, but also also improving your technical skills and learning something new.