in your garage to make future searches easy.

Condition Value
expand_moreRear axle brake
Rear axle bleeder valve 6.64 lbf⋅ft
Rear axle brake caliper 22.13 lbf⋅ft
Rear axle brake caliper mounting support 95.88 lbf⋅ft
Use new screws.
Rear axle brake disc 5.16 lbf⋅ft
Rear axle brake hose 11.8 lbf⋅ft
Replace sealing rings.
expand_moreRear axle suspension
expand_moreRear axle shock absorber
expand_moreOn chassis
Top 66.38 lbf⋅ft
expand_moreOn stub axle
Bottom 110.63 lbf⋅ft
expand_moreRear axle wheel suspension
expand_moreRear axle longitudinal control arm
expand_moreAt the bracket
First stage 66.38 lbf⋅ft
Use new screws and nuts.
Second stage 60°
Third stage 15°
expand_moreOn chassis
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 15°
On stub axle 110.63 lbf⋅ft
expand_moreRear axle stabilizer mounting
First stage 18.44 lbf⋅ft
Replace screws.
Second stage 30°
Third stage 15°
expand_moreRear axle stabilizer support at the axle control arm
expand_moreOn stub axle
First stage 33.19 lbf⋅ft
Second stage 60°
Third stage 15°
expand_moreRear axle stabilizer support at the stabilizer
First stage 29.5 lbf⋅ft
Second stage 60°
Third stage 15°
expand_moreRear axle stabilizer support at the stub axle
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 60°
Third stage 15°
expand_moreAll other modifications
First stage 29.5 lbf⋅ft
Second stage 60°
Third stage 15°
expand_moreStabilizer of rear axle on axle
First stage 18.44 lbf⋅ft
Second stage 30°
Third stage 15°
expand_moreTrack control arm lower
expand_moreOn rear axle
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 60°
Third stage 15°
expand_moreOn stub axle
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 60°
Third stage 15°
expand_moreTrack control arm upper
expand_moreOn rear axle
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 60°
Third stage 15°
expand_moreOn stub axle
First stage 110.63 lbf⋅ft
Replace screws and nuts.
Second stage 45°
Third stage 15°
expand_moreWheel hub wheel bearing
expand_moreWheel bearing unit
First stage 44.25 lbf⋅ft
Replace screws and nuts.
Second stage 60°
Third stage 15°
expand_moreWheels and tires
Tire pressure sensors 7.38 lbf⋅ft
Wheel attachment 81.13 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2005 Opel Signum user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Signum service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2005 Opel Signum you're not only saving money, but also also improving your technical skills and learning something new.

2005 Opel Signum generations

In 2005 Opel offered 2 generations of the Signum. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Opel Signum A2 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat