1999 Opel Omega Wagon B2 Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Opel diesel straight-6 2.5 L 25 DT 129 HP | 16.96 lbf⋅ft |
Replace screws and nuts. | |
Opel diesel straight-6 2.5 L X 25 TD 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 16.96 lbf⋅ft |
Replace screws and nuts. | |
Opel diesel straight-6 2.5 L X 25 DT 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 16.96 lbf⋅ft |
Replace screws and nuts. | |
Opel gasoline V6 2.5 L X 25 XE 168 HP at 6000 RPM, 227 N⋅m at 3200 RPM | 14.75 lbf⋅ft |
Opel gasoline V6 3.0 L X 30 XE 208 HP | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Replace screws and nuts. |
All Opel gasoline straight-4 2.0 L X 20 XEV engines | 18.44 lbf⋅ft |
All Opel gasoline straight-4 2.2 L Y 22 XE engines | 18.44 lbf⋅ft |
All Opel gasoline straight-4 2.2 L Z 22 XE engines | 18.44 lbf⋅ft |
All other modifications | 25.81 lbf⋅ft |
All Opel gasoline V6 2.5 L X 25 XE engines | 25.81 lbf⋅ft |
All Opel gasoline V6 3.0 L X 30 XE engines | 25.81 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Third stage | 15° |
First stage | hand-screwed |
Second stage | 360° |
All other modifications | 44.25 lbf⋅ft |
Coolant pump | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Third stage | 30° |
Opel diesel straight-6 2.5 L 25 DT 129 HP | 11.06 lbf⋅ft |
Opel diesel straight-6 2.5 L X 25 TD 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 11.06 lbf⋅ft |
Opel diesel straight-6 2.5 L X 25 DT 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 11.06 lbf⋅ft |
Opel diesel straight-4 2.0 L X 20 DTH 99 HP at 4300 RPM, 205 N⋅m at 1600 RPM | 11.06 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 59 lbf⋅ft |
Use new screws. See figure 2. | |
Second stage | loosen by 180° |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 90–100° |
Fifth stage | 90–100° |
Sixth stage | Warm-up run |
25 min | |
Seventh stage | 90–100° |
First stage | 18.44 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
Fifth stage | 15° |
First stage | 18.44 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
Fifth stage | 15° |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 4. | |
Second stage | 65° |
Third stage | 65° |
Fourth stage | 65° |
Fifth stage | 65° |
Sixth stage | 15° |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 4. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
Fifth stage | 15° |
Opel diesel straight-6 2.5 L 25 DT 129 HP | 11.06 lbf⋅ft |
Opel diesel straight-6 2.5 L X 25 DT 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 11.06 lbf⋅ft |
Opel diesel straight-6 2.5 L X 25 TD 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 11.06 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 70° |
First stage | 25.81 lbf⋅ft |
Second stage | 45° |
Third stage | 15° |
First stage | 25.81 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 73.76 lbf⋅ft |
Second stage | 90° |
Third stage | 60° |
First stage | 184.39 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
Third stage | 15° |
First stage | 184.39 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
Third stage | 15° |
First stage | 110.63 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 95.88 lbf⋅ft |
Use new screw. | |
Second stage | 40–50° |
Crankshaft pulley | 14.75 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Second stage | 30° |
Third stage | 15° |
First stage | 47.94 lbf⋅ft |
Second stage | 30° |
Third stage | 15° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Third stage | 15° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Third stage | 15° |
First stage | 47.94 lbf⋅ft |
Replace screws. Use screw-locking compound. | |
Second stage | 30° |
Third stage | 15° |
First stage | 18.44 lbf⋅ft |
Second stage | 50° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
Third stage | 15° |
First stage | 66.38 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
Inlet camshaft | 18.44 lbf⋅ft |
Outlet camshaft | 18.44 lbf⋅ft |
Inlet camshaft | 18.44 lbf⋅ft |
Outlet camshaft | 18.44 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Opel gasoline straight-4 2.0 L X 20 SE 114 HP at 5400 RPM, 172 N⋅m at 2800 RPM | 33.19 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 35° |
First stage | 66.38 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
Third stage | 30° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
Third stage | 15° |
Cap | 44.25 lbf⋅ft |
Cap | 22.13 lbf⋅ft |
Chain tensioner | 11.8 lbf⋅ft |
All Opel gasoline straight-4 2.0 L X 20 SE engines | 2.95 lbf⋅ft |
All Opel gasoline straight-4 2.0 L X 20 XEV engines | 4.43 lbf⋅ft |
All Opel gasoline straight-4 2.2 L Y 22 XE engines | 4.43 lbf⋅ft |
All Opel gasoline straight-4 2.2 L Z 22 XE engines | 4.43 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Toothed belt tensioning roller | 14.75 lbf⋅ft |
Opel gasoline straight-4 2.0 L X 20 SE 114 HP at 5400 RPM, 172 N⋅m at 2800 RPM | 33.19 lbf⋅ft |
M12 | 18.44 lbf⋅ft |
M16 | 33.19 lbf⋅ft |
Torx screws | 7.38 lbf⋅ft |
With hexagon-head screws | 33.19 lbf⋅ft |
Torx screws | 7.38 lbf⋅ft |
With hexagon-head screws | 33.19 lbf⋅ft |
Opel gasoline V6 2.5 L X 25 XE 168 HP at 6000 RPM, 227 N⋅m at 3200 RPM | 40.57 lbf⋅ft |
Torx screws | 7.38 lbf⋅ft |
With hexagon-head screws | 40.57 lbf⋅ft |
Opel diesel straight-4 2.0 L X 20 DTH 99 HP at 4300 RPM, 205 N⋅m at 1600 RPM | 7.38 lbf⋅ft |
Opel gasoline straight-4 2.0 L X 20 SE 114 HP at 5400 RPM, 172 N⋅m at 2800 RPM | 11.06 lbf⋅ft |
Metal cap | 22.13 lbf⋅ft |
Plastic cap | 18.44 lbf⋅ft |
Opel gasoline straight-4 2.0 L X 20 XEV 134 HP at 5600 RPM, 185 N⋅m at 4000 RPM | 11.06 lbf⋅ft |
Opel gasoline straight-4 2.2 L Z 22 XE 142 HP | 11.06 lbf⋅ft |
Opel gasoline straight-4 2.2 L Y 22 XE 142 HP at 5400 RPM, 205 N⋅m at 4000 RPM | 11.06 lbf⋅ft |
Opel gasoline V6 2.5 L X 25 XE 168 HP at 6000 RPM, 227 N⋅m at 3200 RPM | 11.06 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Opel gasoline straight-4 2.0 L X 20 SE 114 HP at 5400 RPM, 172 N⋅m at 2800 RPM | 7.38 lbf⋅ft |
Clean the thread and use screw-locking compound. |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
Oil sump lower part | 14.75 lbf⋅ft |
Oil sump top part | 14.75 lbf⋅ft |
Clean the thread and use screw-locking compound. |
Opel gasoline straight-4 2.2 L Z 22 XE 142 HP | 5.9 lbf⋅ft |
Clean the thread and use screw-locking compound. | |
Opel gasoline straight-4 2.2 L Y 22 XE 142 HP at 5400 RPM, 205 N⋅m at 4000 RPM | 5.9 lbf⋅ft |
Clean the thread and use screw-locking compound. | |
Opel gasoline V6 2.5 L X 25 XE 168 HP at 6000 RPM, 227 N⋅m at 3200 RPM | 11.06 lbf⋅ft |
Clean the thread and use screw-locking compound. |
M8 | 14.75 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 30° |
Oil sump lower part | 5.9 lbf⋅ft |
Oil sump top part | 14.75 lbf⋅ft |
All Opel gasoline straight-4 2.0 L X 20 XEV engines | 4.43 lbf⋅ft |
All Opel gasoline straight-4 2.2 L Y 22 XE engines | 4.43 lbf⋅ft |
All Opel gasoline straight-4 2.2 L Z 22 XE engines | 4.43 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Crankshaft sensor | 5.9 lbf⋅ft |
Opel diesel straight-4 2.0 L X 20 DTH 99 HP at 4300 RPM, 205 N⋅m at 1600 RPM | 7.38 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Opel gasoline straight-4 2.0 L X 20 SE engines | 9.59 lbf⋅ft |
All Opel gasoline straight-4 2.0 L X 20 XEV engines | 9.59 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Opel gasoline V6 2.5 L X 25 XE engines | 40.57 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Use assembly paste |
Opel diesel straight-6 2.5 L 25 DT 129 HP | 17.7 lbf⋅ft |
Replace screws and nuts. | |
Opel diesel straight-6 2.5 L X 25 TD 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 17.7 lbf⋅ft |
Replace screws and nuts. | |
Opel diesel straight-6 2.5 L X 25 DT 129 HP at 4500 RPM, 250 N⋅m at 2200 RPM | 17.7 lbf⋅ft |
Replace screws and nuts. | |
Opel gasoline V6 2.5 L X 25 XE 168 HP at 6000 RPM, 227 N⋅m at 3200 RPM | 14.75 lbf⋅ft |
Replace screws and nuts. | |
Opel gasoline V6 3.0 L X 30 XE 208 HP | 14.75 lbf⋅ft |
Replace screws and nuts. | |
All other modifications | 16.23 lbf⋅ft |
Replace screws and nuts. |
Spark plugs | 18.44 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1999 Opel Omega Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Omega Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1999 Opel Omega Wagon you're not only saving money, but also also improving your technical skills and learning something new.
1999 Opel Omega Wagon generations
In 1999 Opel offered 2 generations of the Omega Wagon. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.