in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
AWD clutch oil control screws 10.33 lbf⋅ft
Drive shaft intermediate bearing 16.23 lbf⋅ft
expand_moreFront axle drive shaft
expand_moreCentral nuts
First stage 110.63 lbf⋅ft
Replace nuts.
Second stage 45° detach
Third stage 184.39 lbf⋅ft
Propeller shaft intermediate bearing 14.75 lbf⋅ft
expand_morePropeller shaft
At the differential 22.13 lbf⋅ft
Use screw-locking compound.
expand_moreRear axle drive shaft
expand_moreCentral nuts
First stage 110.63 lbf⋅ft
Replace nuts.
Second stage loosen by 45°
Third stage 184.39 lbf⋅ft
expand_moreClutch
Clutch master cylinder 16.23 lbf⋅ft
Clutch pressure plate 22.13 lbf⋅ft
expand_moreClutch slave cylinder
With concentric slave cylinder 4.43 lbf⋅ft
Use screw-locking compound.
expand_moreGear shifting
Selector cable linkage 14.75 lbf⋅ft
expand_moreGearbox
Gearbox flange connection at engine 44.25 lbf⋅ft
expand_moreGearbox lubrication
expand_moreDistributor gearbox oil drain plug
AAM transfer case 29.5 lbf⋅ft
Use new seal and screws.
expand_moreDistributor gearbox oil filler screws
AAM transfer case 29.5 lbf⋅ft
Replace screws.
expand_moreGearbox oil drain plug
AF40-6 gearbox 8.85 lbf⋅ft
F40-6 gearbox 22.13 lbf⋅ft
Replace screws.
expand_moreGearbox oil filler plug
expand_moreWith 6-speed gearbox
F40-6 gearbox 22.13 lbf⋅ft
expand_moreWith automatic gearbox
AF40-6 gearbox 29.5 lbf⋅ft
Replace sealing rings.
expand_moreOil control plug
expand_moreWith automatic gearbox
AF40-6 gearbox 5.9 lbf⋅ft
Replace sealing rings.
expand_moreGearbox mounting
expand_moreGearbox mounting
expand_moreScrews at the gearbox bracket
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 60°
Third stage 15°
Nuts on the chassis 14.75 lbf⋅ft
Screws on the chassis 16.23 lbf⋅ft
expand_moreGearbox support
expand_moreAt the gearbox bracket
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 60°
Third stage 15°
Top 73.76 lbf⋅ft
At the gearbox
Otherwise 73.76 lbf⋅ft
expand_moreTransfer case
expand_moreTransfer box bracket
On the engine block 16.23 lbf⋅ft
Otherwise 44.25 lbf⋅ft
Tighten the screws evenly in several steps.
expand_moreTransfer box onto transmission flange connection
Torx screws 81.13 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Opel Insignia Wagon OPC user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Insignia Wagon OPC service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2014 Opel Insignia Wagon OPC you're not only saving money, but also also improving your technical skills and learning something new.

Opel Insignia Wagon OPC A facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat